您好,登录后才能下订单哦!
这篇文章主要讲解了“nginx+tomcat怎么使用redis session共享”,文中的讲解内容简单清晰,易于学习与理解,下面请大家跟着小编的思路慢慢深入,一起来研究和学习“nginx+tomcat怎么使用redis session共享”吧!
环境准备
1、准备一台nginx服务器 ip192.168.1.133 端口81
安装过程:
#首先安装依赖: yum -y install gcc-c++ yum -y install pcre pcre-devel yum -y install zlib zlib-devel yum -y install openssl openssl—devel #注意 : 安装nginx必须使用 root 用户安装 #创建一个nginx目录 mkdir /usr/local/src/nginx #进入到nginx目录 cd /usr/local/src/nginx #下载或上传安装包 wget http://nginx.org/download/nginx.tar.gz 或 rz上传 #解压安装包 tar -xvf nginx.tar.gz #进入到解压后的目录 cd nginx # 下面 才开始正式安装 #把nginx安装到指定用户的目录 mkdir -p /ucenter/soft/nginx #安装配置 prefix为安装目录 user为用户 group为 组 ./configure --prefix=/ucenter/soft/nginx --user=ucenter --group=ucenter #编译 make #安装 make install #在linux系统中由于非root用户不能占用80端口,所以需要使普通用户以root身份启动nginx。 cd /ucenter/soft/nginx/sbin #把soft文件下所有的文件所属者修改为ucener -r 表示递归 chown ucenter:ucenter ./soft/ -r #修改 ./nginx 的所属为root chown root nginx #让普通用户可以使用80端口,可以使用root权限启用nginx chmod u+s nginx #修改配置文件 在修改配置文件之前 ,要备份该文件 cd conf/ # 要注意nginx 的工作进程,一般根据cpu的核数去修改 vim nginx.conf #关闭防火墙,打开80端口 service iptables stop #启动nginx ./nginx #重启nginx ./nginx -s reload #关闭nginx ./nginx -s stop
准备一台tomcat服务器,先准备java环境,安装jdk步骤省略
然后分别安装3个tomcat 服务器ip地址:192.168.1.143,tomcat1 8080端口,tomcat2 8081端口,tomcat3 8082端口。
apache-tomcat-7.0.64/conf/server.xml配置文件修改这三个地方,这样端口就不会冲突
<server port="8005" shutdown="shutdown"> <connector port="8080" protocol="http/1.1" connectiontimeout="20000" redirectport="8443" /> <connector port="8009" protocol="ajp/1.3" redirectport="8443" />
修改tomcat root目录下index.jsp,分别增加每个tomcat的标识,以及在页面上显示session id
<%-- licensed to the apache software foundation (asf) under one or more contributor license agreements. see the notice file distributed with this work for additional information regarding copyright ownership. the asf licenses this file to you under the apache license, version 2.0 (the "license"); you may not use this file except in compliance with the license. you may obtain a copy of the license at http://www.apache.org/licenses/license-2.0 unless required by applicable law or agreed to in writing, software distributed under the license is distributed on an "as is" basis, without warranties or conditions of any kind, either express or implied. see the license for the specific language governing permissions and limitations under the license. --%> <!doctype html> <%@ page session="true" %> <% java.text.simpledateformat sdf = new java.text.simpledateformat("yyyy"); request.setattribute("year", sdf.format(new java.util.date())); request.setattribute("tomcaturl", "http://tomcat.apache.org/"); request.setattribute("tomcatdocurl", "/docs/"); request.setattribute("tomcatexamplesurl", "/examples/"); %> <html> <head> <title><%=request.getservletcontext().getserverinfo() %></title> <link href="favicon.ico" rel="icon" type="image/x-icon" /> <link href="favicon.ico" rel="shortcut icon" type="image/x-icon" /> <link href="tomcat.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="wrapper"> <div id="navigation" class="curved container"> <span id="nav-home"><a href="${tomcaturl}">home--<%=request.getsession().getid() %></a></span> <span id="nav-hosts"><a href="${tomcatdocurl}">documentation</a></span> <span id="nav-config"><a href="${tomcatdocurl}config/">configuration</a></span> <span id="nav-examples"><a href="${tomcatexamplesurl}">examples</a></span> <span id="nav-wiki"><a href="http://wiki.apache.org/tomcat/frontpage">wiki</a></span> <span id="nav-lists"><a href="${tomcaturl}lists.html">mailing lists</a></span> <span id="nav-help"><a href="${tomcaturl}findhelp.html">find help</a></span> <br /> </div> <div id="asf-box"> <h1>${pagecontext.servletcontext.serverinfo}--8080</h1> </div> <div id="upper" class="curved container"> <div id="congrats" class="curved container"> <h2>if you're seeing this, you've successfully installed tomcat. congratulations!</h2> </div> <div id="notice"> <img src="tomcat.png" alt="[tomcat logo]" /> <div id="tasks"> <h3>recommended reading:</h3> <h4><a href="${tomcatdocurl}security-howto.html">security considerations how-to</a></h4> <h4><a href="${tomcatdocurl}manager-howto.html">manager application how-to</a></h4> <h4><a href="${tomcatdocurl}cluster-howto.html">clustering/session replication how-to</a></h4> </div> </div> <div id="actions"> <div> <a class="container shadow" href="/manager/status"><span>server status</span></a> </div> <div> <a class="container shadow" href="/manager/html"><span>manager app</span></a> </div> <div> <a class="container shadow" href="/host-manager/html"><span>host manager</span></a> </div> </div> <!-- <br /> --> <br /> </div> <div id="middle" class="curved container"> <h3>developer quick start</h3> <div> <div> <p><a href="${tomcatdocurl}setup.html">tomcat setup</a></p> <p><a href="${tomcatdocurl}appdev/">first web application</a></p> </div> </div> <div> <div> <p><a href="${tomcatdocurl}realm-howto.html">realms & aaa</a></p> <p><a href="${tomcatdocurl}jndi-datasource-examples-howto.html">jdbc datasources</a></p> </div> </div> <div> <div> <p><a href="${tomcatexamplesurl}">examples</a></p> </div> </div> <div> <div> <p><a href="http://wiki.apache.org/tomcat/specifications">servlet specifications</a></p> <p><a href="http://wiki.apache.org/tomcat/tomcatversions">tomcat versions</a></p> </div> </div> <br /> </div> <div id="lower"> <div id="low-manage" class=""> <div class="curved container"> <h3>managing tomcat</h3> <p>for security, access to the <a href="/manager/html">manager webapp</a> is restricted. users are defined in:</p> <pre>$catalina_home/conf/tomcat-users.xml</pre> <p>in tomcat 7.0 access to the manager application is split between different users. <a href="${tomcatdocurl}manager-howto.html">read more...</a></p> <br /> <h4><a href="${tomcatdocurl}release-notes.txt">release notes</a></h4> <h4><a href="${tomcatdocurl}changelog.html">changelog</a></h4> <h4><a href="${tomcaturl}migration.html">migration guide</a></h4> <h4><a href="${tomcaturl}security.html">security notices</a></h4> </div> </div> <div id="low-docs" class=""> <div class="curved container"> <h3>documentation</h3> <h4><a href="${tomcatdocurl}">tomcat 7.0 documentation</a></h4> <h4><a href="${tomcatdocurl}config/">tomcat 7.0 configuration</a></h4> <h4><a href="http://wiki.apache.org/tomcat/frontpage">tomcat wiki</a></h4> <p>find additional important configuration information in:</p> <pre>$catalina_home/running.txt</pre> <p>developers may be interested in:</p> <ul> <li><a href="http://tomcat.apache.org/bugreport.html">tomcat 7.0 bug database</a></li> <li><a href="${tomcatdocurl}api/index.html">tomcat 7.0 javadocs</a></li> <li><a href="http://svn.apache.org/repos/asf/tomcat/tc7.0.x/">tomcat 7.0 svn repository</a></li> </ul> </div> </div> <div id="low-help" class=""> <div class="curved container"> <h3>getting help</h3> <h4><a href="${tomcaturl}faq/">faq</a> and <a href="${tomcaturl}lists.html">mailing lists</a></h4> <p>the following mailing lists are available:</p> <ul> <li id="list-announce"><strong><a href="${tomcaturl}lists.html#tomcat-announce">tomcat-announce</a><br /> important announcements, releases, security vulnerability notifications. (low volume).</strong> </li> <li><a href="${tomcaturl}lists.html#tomcat-users">tomcat-users</a><br /> user support and discussion </li> <li><a href="${tomcaturl}lists.html#taglibs-user">taglibs-user</a><br /> user support and discussion for <a href="${tomcaturl}taglibs/">apache taglibs</a> </li> <li><a href="${tomcaturl}lists.html#tomcat-dev">tomcat-dev</a><br /> development mailing list, including commit messages </li> </ul> </div> </div> <br /> </div> <div id="footer" class="curved container"> <div> <div> <h4>other downloads</h4> <ul> <li><a href="${tomcaturl}download-connectors.cgi">tomcat connectors</a></li> <li><a href="${tomcaturl}download-native.cgi">tomcat native</a></li> <li><a href="${tomcaturl}taglibs/">taglibs</a></li> <li><a href="${tomcatdocurl}deployer-howto.html">deployer</a></li> </ul> </div> </div> <div> <div> <h4>other documentation</h4> <ul> <li><a href="${tomcaturl}connectors-doc/">tomcat connectors</a></li> <li><a href="${tomcaturl}connectors-doc/">mod_jk documentation</a></li> <li><a href="${tomcaturl}native-doc/">tomcat native</a></li> <li><a href="${tomcatdocurl}deployer-howto.html">deployer</a></li> </ul> </div> </div> <div> <div> <h4>get involved</h4> <ul> <li><a href="${tomcaturl}getinvolved.html">overview</a></li> <li><a href="${tomcaturl}svn.html">svn repositories</a></li> <li><a href="${tomcaturl}lists.html">mailing lists</a></li> <li><a href="http://wiki.apache.org/tomcat/frontpage">wiki</a></li> </ul> </div> </div> <div> <div> <h4>miscellaneous</h4> <ul> <li><a href="${tomcaturl}contact.html">contact</a></li> <li><a href="${tomcaturl}legal.html">legal</a></li> <li><a href="http://www.apache.org/foundation/sponsorship.html">sponsorship</a></li> <li><a href="http://www.apache.org/foundation/thanks.html">thanks</a></li> </ul> </div> </div> <div> <div> <h4>apache software foundation</h4> <ul> <li><a href="${tomcaturl}whoweare.html">who we are</a></li> <li><a href="${tomcaturl}heritage.html">heritage</a></li> <li><a href="http://www.apache.org">apache home</a></li> <li><a href="${tomcaturl}resources.html">resources</a></li> </ul> </div> </div> <br /> </div> <p>copyright ©1999-${year} apache software foundation. all rights reserved</p> </div> </body> </html>
这时候 修改nginx配置文件nginx.conf,把三台tomcat的ip地址以及端口号加入进去,使用nginx做代理
#user nobody; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; #log_format main '$remote_addr - $remote_user [$time_local] "$request" ' # '$status $body_bytes_sent "$http_referer" ' # '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; upstream localhost1 { #ip_hash; server 192.168.1.143:8080; server 192.168.1.143:8081; server 192.168.1.143:8082; } server { listen 81; server_name localhost; #charset koi8-r; #access_log logs/host.access.log main; location / { proxy_connect_timeout 3; proxy_send_timeout 30; proxy_read_timeout 30; proxy_pass http://localhost1; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # proxy the php scripts to apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the php scripts to fastcgi server listening on 127.0.0.1:9000 # #location ~ \.php$ { # root html; # fastcgi_pass 127.0.0.1:9000; # fastcgi_index index.php; # fastcgi_param script_filename /scripts$fastcgi_script_name; # include fastcgi_params; #} # deny access to .htaccess files, if apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # another virtual host using mix of ip-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # location / { # root html; # index index.html index.htm; # } #} # https server # #server { # listen 443; # server_name localhost; # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # ssl_session_timeout 5m; # ssl_protocols sslv2 sslv3 tlsv1; # ssl_ciphers high:!anull:!md5; # ssl_prefer_server_ciphers on; # location / { # root html; # index index.html index.htm; # } #} }
这时候,分别启动三台tomcat以及nginx,访问,这时候每次刷新页面,都会随机访问8080或者8081或者8082,而且页面上出现的session id也都是不一样的,我们应该如何让这三台tomcat共享session呢,我们使用redis来做。
这时候,在已经按照三台tomcat的服务器192.168.1.143上,安装redis,安装步骤如下:
$ wget http://download.redis.io/releases/redis-3.2.3.tar.gz $ tar xzf redis-3.2.3.tar.gz $ cd redis-3.2.3 $ make malloc=libc #启动redis src前面是安装的路径 $ src/redis-server & #关闭redis src/redis-cli shutdown #使用redis 放入键值对 key value $ src/redis-cli 127.0.0.1:6379> set foo bar ok 127.0.0.1:6379> get foo "bar" $
安装完redis之后,在三个tomcat的lib文件夹内分别上传这五个所依赖的jar,分别是
commons-pool2-2.0.jar
jedis-2.5.2.jar
tomcat-redis-session-manager1.2.jar
tomcat-juli.jar
tomcat-juli-adapters.jar
所有jar在这里了,
然后分别修个三个tomcat的context.xml文件,增加如下的配置
<?xml version='1.0' encoding='utf-8'?> <context> <!-- default set of monitored resources --> <watchedresource>web-inf/web.xml</watchedresource> <!-- 这里增加redis session共享的配置 6379是redis的端口--> <valve classname="com.orangefunction.tomcat.redissessions.redissessionhandlervalve" /> <manager classname="com.orangefunction.tomcat.redissessions.redissessionmanager" host="127.0.0.1" port="6379" database="0" maxinactiveinterval="60" /> </context>
这时候,分别重启三个tomcat以及nginx,查看tomcat日志之后,发现没有任何异常报错,说明我们成功了,接下来开始测试。
我们访问nginx服务器地址:
得到的是8080端口的 tomcat1 ,session id为1a0625767f27ba95ef4d5f061fe0568d
这时候按f5刷新页面,得到的是8081端口的 tomcat2 ,session id依旧是 1a0625767f27ba95ef4d5f061fe0568d
再次刷新页面,得到的是8082端口的 tomcat3,session id依旧是 1a0625767f27ba95ef4d5f061fe0568d。 、
这时候,说明我们搭建tomcat + nginx负载均衡 + redis session同步成功啦!
nginx帮助把我们的请求均匀的分发给三个tomcat --》tomcat1 、tomcat2以及tomcat3
redis帮助我们同步session,这样一来,我们的服务器性能就会提高许多,任何一台tomcat发生故障后,对整体的服务都不会有影响了。
感谢各位的阅读,以上就是“nginx+tomcat怎么使用redis session共享”的内容了,经过本文的学习后,相信大家对nginx+tomcat怎么使用redis session共享这一问题有了更深刻的体会,具体使用情况还需要大家实践验证。这里是亿速云,小编将为大家推送更多相关知识点的文章,欢迎关注!
免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。