centos

centos里ifconfig命令怎么查看ip

小樊
37
2025-09-30 18:51:43
栏目: 智能运维

在 CentOS 系统中,使用 ifconfig 命令可以查看网络接口的 IP 地址信息。以下是具体步骤:

  1. 打开终端。

  2. 输入以下命令并按下回车键:

    ifconfig
    
  3. 终端会显示系统中所有网络接口的详细信息,包括 IP 地址、子网掩码、广播地址等。每个网络接口的信息通常以接口名称(如 eth0ens33 等)开头。

例如,输出可能类似于以下内容:

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.100  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::a00:27ff:fe4e:66a1  prefixlen 64  scopeid 0x20<link>
        ether 08:00:27:4e:66:a1  txqueuelen 1000  (Ethernet)
        RX packets 1003411  bytes 123456789 (117.7 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 987654  bytes 987654321 (941.5 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 321  bytes 24321 (23.7 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 321  bytes 24321 (23.7 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

在这个例子中:

如果你只想查看特定接口的 IP 地址,可以使用 grep 命令来过滤输出。例如,查看 eth0 接口的 IP 地址:

ifconfig eth0 | grep 'inet '

或者使用 ip 命令,它提供了更现代和灵活的网络配置工具:

ip addr show eth0

这将显示 eth0 接口的详细信息,包括 IP 地址。

0
看了该问题的人还看了