您好，登录后才能下订单哦！
密码登录
登录注册
点击 登录注册 即表示同意《亿速云用户服务条款》
这篇文章主要讲解了“怎么解决Greenplum初始化数据库gpinitsystem报错”，文中的讲解内容简单清晰，易于学习与理解，下面请大家跟着小编的思路慢慢深入，一起来研究和学习“怎么解决Greenplum初始化数据库gpinitsystem报错”吧！
[gpadmin@sdw1 ~]$ gpinitsystem -c gpconfigs/gpinitsystem_config -h gpconfigs/hostfile_gpinitsystem 20200618:15:33:10:010535 gpinitsystem:sdw1:gpadmin-[INFO]:-Checking configuration parameters, please wait... 20200618:15:33:10:010535 gpinitsystem:sdw1:gpadmin-[INFO]:-Reading Greenplum configuration file gpconfigs/gpinitsystem_config 20200618:15:33:10:010535 gpinitsystem:sdw1:gpadmin-[INFO]:-Locale has not been set in gpconfigs/gpinitsystem_config, will set to default value 20200618:15:33:10:010535 gpinitsystem:sdw1:gpadmin-[INFO]:-Locale set to en_US.utf8 20200618:15:33:10:010535 gpinitsystem:sdw1:gpadmin-[WARN]:-Master hostname mdw does not match hostname output 20200618:15:33:10:010535 gpinitsystem:sdw1:gpadmin-[INFO]:-Checking to see if mdw can be resolved on this host 20200618:15:33:11:010535 gpinitsystem:sdw1:gpadmin-[FATAL]:-Master hostname in configuration file is mdw 20200618:15:33:11:010535 gpinitsystem:sdw1:gpadmin-[FATAL]:-Operating system command returns sdw1 20200618:15:33:11:010535 gpinitsystem:sdw1:gpadmin-[FATAL]:-Unable to resolve mdw on this host 20200618:15:33:11:010535 gpinitsystem:sdw1:gpadmin-[FATAL]:-Master hostname in gpinitsystem configuration file must be mdw Script Exiting!
由于gpinitsystem命令config要求不能写master节点hostname，所以无法使用hostfile解析master节点hostname，所以需要使用Master节点初始化Greenplum。
使用mdw节点gpinitsystem初始化Greenplum。
[gpadmin@mdw ~]$ gpinitsystem -c gpconfigs/gpinitsystem_config -h gpconfigs/hostfile_gpinitsystem 20200618:15:35:11:007212 gpinitsystem:mdw:gpadmin-[INFO]:-Checking configuration parameters, please wait... ... > y 20200618:15:36:27:007212 gpinitsystem:mdw:gpadmin-[INFO]:-Building the Master instance database, please wait... 20200618:15:36:33:007212 gpinitsystem:mdw:gpadmin-[INFO]:-Starting the Master in admin mode 20200618:15:36:34:007212 gpinitsystem:mdw:gpadmin-[FATAL]:-Unknown host sdw1: ping: sdw1: Name or service not known ping: sdw1: Name or service not known Script Exiting! 20200618:15:36:34:007212 gpinitsystem:mdw:gpadmin-[WARN]:-Script has left Greenplum Database in an incomplete state 20200618:15:36:34:007212 gpinitsystem:mdw:gpadmin-[WARN]:-Run command bash /home/gpadmin/gpAdminLogs/backout_gpinitsystem_gpadmin_20200618_153511 to remove these changes 20200618:15:36:34:007212 gpinitsystem:mdw:gpadmin-[INFO]:-Start Function BACKOUT_COMMAND 20200618:15:36:34:007212 gpinitsystem:mdw:gpadmin-[INFO]:-End Function BACKOUT_COMMAND
segment两台机器真实的hostname需要在/etc/hosts文件中有映射关系。
需要将segment主机真实hostname加入/etc/hosts文件。
初始化命令报错信息：
20200618:15:58:27:014010 gpstart:mdw:gpadmin-[INFO]:-Starting gpstart with args: -a -l /home/gpadmin/gpAdminLogs -d /data/master/gpseg-1 20200618:15:58:27:014010 gpstart:mdw:gpadmin-[INFO]:-Gathering information and validating the environment... 20200618:15:58:27:014010 gpstart:mdw:gpadmin-[INFO]:-Greenplum Binary Version: 'postgres (Greenplum Database) 6.8.0 build commit:d9b16e3438fc6e01e6083cd82cf76ba99c1b50b5' 20200618:15:58:27:014010 gpstart:mdw:gpadmin-[INFO]:-Greenplum Catalog Version: '301908232' 20200618:15:58:27:014010 gpstart:mdw:gpadmin-[INFO]:-Starting Master instance in admin mode 20200618:15:58:28:014010 gpstart:mdw:gpadmin-[INFO]:-Obtaining Greenplum Master catalog information 20200618:15:58:28:014010 gpstart:mdw:gpadmin-[INFO]:-Obtaining Segment details from master... 20200618:15:58:28:014010 gpstart:mdw:gpadmin-[INFO]:-Setting new master era 20200618:15:58:28:014010 gpstart:mdw:gpadmin-[INFO]:-Master Started... 20200618:15:58:28:014010 gpstart:mdw:gpadmin-[INFO]:-Shutting down master 20200618:15:58:28:014010 gpstart:mdw:gpadmin-[INFO]:-Commencing parallel segment instance startup, please wait... 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[INFO]:-Process results... 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[ERROR]:-No segment started for content: 0. 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[INFO]:-dumping success segments: ['sdw1:/data2/primary/gpseg1:content=1:dbid=3:role=p:preferred_role=p:mode=n:status=u', 'sdw2:/data2/primary/gpseg3:content=3:dbid=5:role=p:preferred_role=p:mode=n:status=u'] 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[INFO]:----------------------------------------------------- 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[INFO]:-DBID:2 FAILED host:'sdw1' datadir:'/data1/primary/gpseg0' with reason:'PG_CTL failed.' 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[INFO]:-DBID:4 FAILED host:'sdw2' datadir:'/data1/primary/gpseg2' with reason:'PG_CTL failed.' 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[INFO]:----------------------------------------------------- 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[INFO]:----------------------------------------------------- 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[INFO]:- Successful segment starts = 2 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[WARNING]:-Failed segment starts = 2 <<<<<<<< 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[INFO]:- Skipped segment starts (segments are marked down in configuration) = 0 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[INFO]:----------------------------------------------------- 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[INFO]:-Successfully started 2 of 4 segment instances <<<<<<<< 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[INFO]:----------------------------------------------------- 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[WARNING]:-Segment instance startup failures reported 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[WARNING]:-Failed start 2 of 4 segment instances <<<<<<<< 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[WARNING]:-Review /home/gpadmin/gpAdminLogs/gpstart_20200618.log 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[INFO]:----------------------------------------------------- 20200618:15:58:34:014010 gpstart:mdw:gpadmin-[INFO]:-Commencing parallel segment instance shutdown, please wait... 20200618:15:58:36:014010 gpstart:mdw:gpadmin-[ERROR]:-gpstart error: Do not have enough valid segments to start the array.
gpinitsystem_20200618.log报错信息：
20200618:16:21:05:015525 gpinitsystem:mdw:gpadmin-[WARN]: 20200618:16:21:05:015525 gpinitsystem:mdw:gpadmin-[WARN]:-Failed to start Greenplum instance; review gpstart output to 20200618:16:21:05:015525 gpinitsystem:mdw:gpadmin-[WARN]:- determine why gpstart failed and reinitialize cluster after resolving 20200618:16:21:05:015525 gpinitsystem:mdw:gpadmin-[WARN]:- issues. Not all initialization tasks have completed so the cluster 20200618:16:21:05:015525 gpinitsystem:mdw:gpadmin-[WARN]:- should not be used. 20200618:16:21:05:015525 gpinitsystem:mdw:gpadmin-[WARN]:-gpinitsystem will now try to stop the cluster 20200618:16:21:05:015525 gpinitsystem:mdw:gpadmin-[WARN]: 20200618:16:21:06:015525 gpinitsystem:mdw:gpadmin-[INFO]:-Start Function ERROR_EXIT 20200618:16:21:06:015525 gpinitsystem:mdw:gpadmin-[WARN]:-Failed to stop new Greenplum instance Script Exiting!
gpstart -m -d /data/master/gpseg-1 /* 只启动master gpstop -a -M fast /* -a禁止输出确认y/n，-M fast/immediate/smart，相当于oracle shutdown abort/immediate/normal gpstart -a -v /* -v verbose输出详细启动日志。
上翻找到该节点启动失败命令
stderr='' 20200618:16:36:06:016487 gpsegstart.py_sdw2:gpadmin:sdw2:gpadmin-[DEBUG]:-[worker1] finished cmd: Starting seg at dir /data1/primary/gpseg2 cmdStr='env GPSESSID=0000000000 GPERA=8a0d21cca0b8bbb8_200618163604 $GPHOME/bin/pg_ctl -D /data1/primary/gpseg2 -l /data1/primary/gpseg2/pg_log/startup.log -w -t 600 -o " -p 6000 " start 2>&1' had result: cmd had rc=1 completed=True halted=False stdout='waiting for server to start.... stopped waiting pg_ctl: could not start server
去对应节点找到启动日志文件/data2/primary/gpseg3/pg_log/startup.log
2020-06-18 16:36:05.835068 CST,,,p16504,th746150272,,,,0,,,seg2,,,,,"LOG","00000","registering background worker ""sweeper process""",,,,,,,,"RegisterBackgroundWorker","bgworker.c",774, 2020-06-18 16:36:05.835486 CST,,,p16504,th746150272,,,,0,,,seg2,,,,,"LOG","XX000","could not bind IPv4 socket: Address already in use",,"Is another postmaster already running on port 6000? If not, wait a few seconds and retry.",,,,,,"StreamServerPort","pqcomm.c",503, 2020-06-18 16:36:05.835741 CST,,,p16504,th746150272,,,,0,,,seg2,,,,,"LOG","XX000","could not bind IPv6 socket: Address already in use",,"Is another postmaster already running on port 6000? If not, wait a few seconds and retry.",,,,,,"StreamServerPort","pqcomm.c",503, 2020-06-18 16:36:05.836023 CST,,,p16504,th746150272,,,,0,,,seg2,,,,,"WARNING","01000","could not create listen socket for ""*""",,,,,,,,"PostmasterMain","postmaster.c",1202, 2020-06-18 16:36:05.836162 CST,,,p16504,th746150272,,,,0,,,seg2,,,,,"FATAL","XX000","could not create any TCP/IP sockets",,,,,,,,"PostmasterMain","postmaster.c",1207,1 0xbe84ec postgres errstart (elog.c:557)
检查发现图形界面占用了6000端口，导致segment启动失败。
[root@sdw2 ~]# netstat -anp|grep 6000 tcp 0 0 0.0.0.0:6000 0.0.0.0:* LISTEN 3969/X tcp6 0 0 :::6000 :::* LISTEN 3969/X [root@sdw2 ~]#
修改gpinitsystem gpconfig，将Master instance与Segment instance端口修改为：PORT_BASE=6500，MIRROR_PORT_BASE=7500
重新运行初始化
[gpadmin@mdw gpconfigs]$ gpinitsystem -c gpinitsystem_config -h hostfile_gpinitsystem -s mdw -S /data/ master/ standby/ [gpadmin@mdw gpconfigs]$ gpinitsystem -c gpinitsystem_config -h hostfile_gpinitsystem -s mdw -S /data/standby/ 20200619:21:15:17:001508 gpinitsystem:mdw:gpadmin-[INFO]:-Checking configuration parameters, please wait... 20200619:21:15:17:001508 gpinitsystem:mdw:gpadmin-[INFO]:-Reading Greenplum configuration file gpinitsystem_config 20200619:21:15:17:001508 gpinitsystem:mdw:gpadmin-[INFO]:-Locale has not been set in gpinitsystem_config, will set to default value 20200619:21:15:17:001508 gpinitsystem:mdw:gpadmin-[INFO]:-Locale set to en_US.utf8 20200619:21:15:17:001508 gpinitsystem:mdw:gpadmin-[INFO]:-MASTER_MAX_CONNECT not set, will set to default value 250 20200619:21:15:18:001508 gpinitsystem:mdw:gpadmin-[INFO]:-Checking configuration parameters, Completed 20200619:21:15:18:001508 gpinitsystem:mdw:gpadmin-[INFO]:-Commencing multi-home checks, please wait... .... 20200619:21:15:19:001508 gpinitsystem:mdw:gpadmin-[INFO]:-Configuring build for multi-home array 20200619:21:15:19:001508 gpinitsystem:mdw:gpadmin-[FATAL]:-Inconsistency between number of multi-home hostnames and number of segments per host 20200619:21:15:19:001508 gpinitsystem:mdw:gpadmin-[INFO]:-Have 3 data directories and 2 multi-home hostnames for each host 20200619:21:15:19:001508 gpinitsystem:mdw:gpadmin-[INFO]:-For multi-home configuration, number of segment instance data directories per host must be multiple of 20200619:21:15:19:001508 gpinitsystem:mdw:gpadmin-[INFO]:-the number of multi-home hostnames within the GPDB array 20200619:21:15:19:001508 gpinitsystem:mdw:gpadmin-[FATAL]:-Unable to continue Script Exiting!
hostfile中只有两个主机名对应segment interface，config文件中DATA_DIRECTORY每个主机指定了3个segment instance，无法平衡，报错。
修改DATA_DIRECTORY为每个segment主机四个segment instance，或者修改hostfile列表，修改为3个interface。
[gpadmin@mdw gpconfigs]$ gpinitstandby -s mdw -S /data/standby/ -P 5433 20200619:21:27:37:011844 gpinitstandby:mdw:gpadmin-[INFO]:-Validating environment and parameters for standby initialization... 20200619:21:27:38:011844 gpinitstandby:mdw:gpadmin-[INFO]:-Checking for data directory /data/standby/ on mdw 20200619:21:27:38:011844 gpinitstandby:mdw:gpadmin-[ERROR]:-Data directory already exists on host mdw 20200619:21:27:38:011844 gpinitstandby:mdw:gpadmin-[ERROR]:-If you want to initialize a new standby on the same host as the master (not recommended), use -S and -P to specify a new data directory and port 20200619:21:27:38:011844 gpinitstandby:mdw:gpadmin-[ERROR]:-Failed to create standby 20200619:21:27:38:011844 gpinitstandby:mdw:gpadmin-[ERROR]:-Error initializing standby master: master data directory exists
解决
查看目录，如果已经存在，更换或者删除目录，gpinitstandby命令自行创建。
[gpadmin@mdw data]$ gpinitstandby -s mdw -S /data/standby/ 20200619:21:29:03:012052 gpinitstandby:mdw:gpadmin-[INFO]:-Validating environment and parameters for standby initialization... 20200619:21:29:03:012052 gpinitstandby:mdw:gpadmin-[INFO]:-Checking for data directory /data/standby/ on mdw 20200619:21:29:04:012052 gpinitstandby:mdw:gpadmin-[ERROR]:-Failed to create standby 20200619:21:29:04:012052 gpinitstandby:mdw:gpadmin-[ERROR]:-Error initializing standby master: cannot create standby on the same host and port
解决
使用gpinitstandby -P指定与Master不同端口。
[gpadmin@mdw data]$ gpinitstandby -s mdw -S /data/standby/ -P 5532 20200619:21:29:23:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Validating environment and parameters for standby initialization... 20200619:21:29:23:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Checking for data directory /data/standby/ on mdw 20200619:21:29:24:012192 gpinitstandby:mdw:gpadmin-[INFO]:------------------------------------------------------ 20200619:21:29:24:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Greenplum standby master initialization parameters 20200619:21:29:24:012192 gpinitstandby:mdw:gpadmin-[INFO]:------------------------------------------------------ 20200619:21:29:24:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Greenplum master hostname = mdw 20200619:21:29:24:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Greenplum master data directory = /data/master/gpseg-1 20200619:21:29:24:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Greenplum master port = 5432 20200619:21:29:24:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Greenplum standby master hostname = mdw 20200619:21:29:24:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Greenplum standby master port = 5532 20200619:21:29:24:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Greenplum standby master data directory = /data/standby/ 20200619:21:29:24:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Greenplum update system catalog = On Do you want to continue with standby master initialization? Yy|Nn (default=N): > y 20200619:21:29:27:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Syncing Greenplum Database extensions to standby 20200619:21:29:28:012192 gpinitstandby:mdw:gpadmin-[INFO]:-The packages on mdw are consistent. 20200619:21:29:28:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Adding standby master to catalog... 20200619:21:29:28:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Database catalog updated successfully. 20200619:21:29:28:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Updating pg_hba.conf file... 20200619:21:29:51:012192 gpinitstandby:mdw:gpadmin-[INFO]:-pg_hba.conf files updated successfully. 20200619:21:29:53:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Starting standby master 20200619:21:29:53:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Checking if standby master is running on host: mdw in directory: /data/standby/ 20200619:21:29:58:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Cleaning up pg_hba.conf backup files... 20200619:21:30:07:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Backup files of pg_hba.conf cleaned up successfully. 20200619:21:30:07:012192 gpinitstandby:mdw:gpadmin-[INFO]:-Successfully created standby master on mdw [gpadmin@mdw data]$
感谢各位的阅读，以上就是“怎么解决Greenplum初始化数据库gpinitsystem报错”的内容了，经过本文的学习后，相信大家对怎么解决Greenplum初始化数据库gpinitsystem报错这一问题有了更深刻的体会，具体使用情况还需要大家实践验证。这里是亿速云，小编将为大家推送更多相关知识点的文章，欢迎关注！
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。