行业资讯

MySQL+Amoeba+MySQLMMM高可用群集

发布时间：2020-07-13 17:09:10 作者：CallousMaster
来源：网络 阅读：526

一、MySQL-MMM(Master-Master MySQL)

MMM概述

注：

MMM组成

二、案例

实验环境：
六台Centos6,两台主mysql（master01、master02）,两台从mysql（slave01、slave02）,一台监控（mmm_mond）,一台读写调度器（amoeba）

先部署主主（master01与master02）复制

Master01

1.准备工作
vim /etc/sysconfig/network-scripts/ifcfg-eth0
    DEVICE=eth0
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=static
    IPADDR=192.168.1.10
    NETMASK=255.255.255.0
vim /etc/sysconfig/network-scripts/ifcfg-eth2
    DEVICE=eth2
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=dhcp
vim /etc/hosts
    192.168.1.10    db1
    192.168.1.20    db2
    192.168.1.30    db3
    192.168.1.40    db4
vim /etc/sysconfig/network
    HOSTNAME=db1
reboot
2.YUM源配置并安装MMM
rm -rf /etc/yum.repos.d/*
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo
yum -y install epel-release
yum -y install mysql-mmm* mysql mysql-server mysql-devel
3.MySQL配置
/etc/init.d/mysqld start && chkconfig --level 35 mysqld on
mysqladmin -uroot password "123"
cp /usr/share/doc/mysql-server-5.1.73/my-medium.cnf /etc/my.cnf
vim /etc/my.cnf
    [mysqld]
    50 log-slave-updates
/etc/init.d/mysqld restart
4.授权并主主同步
mysql -u root -p
mysql> grant replication slave on *.* to 'slave'@'192.168.1.%' identified by '123';
mysql> show master status;
+------------------+----------+--------------+------------------+
| File             | Position | Binlog_Do_DB | Binlog_Ignore_DB |
+------------------+----------+--------------+------------------+
| mysql-bin.000001 |      647 |              |                  |
+------------------+----------+--------------+------------------+
1 row in set (0.00 sec)
mysql> change master to master_host='192.168.1.20',master_user='slave',master_password='123',master_log_file='mysql-bin.000001',master_log_pos=481;
//所跟IP、log、pos等信息都为第二台主的信息
mysql> start slave;
mysql> show slave status\G;
//查看同步状态，I/0和SQL线程状态为yes则正确

Master02

1.准备工作
vim /etc/sysconfig/network-scripts/ifcfg-eth0
    DEVICE=eth0
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=static
    IPADDR=192.168.1.20
    NETMASK=255.255.255.0
vim /etc/sysconfig/network-scripts/ifcfg-eth2
    DEVICE=eth2
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=dhcp
vim /etc/hosts
    192.168.1.10    db1
    192.168.1.20    db2
    192.168.1.30    db3
    192.168.1.40    db4
vim /etc/sysconfig/network
HOSTNAME=db2
reboot
2.YUM源配置并安装MMM
rm -rf /etc/yum.repos.d/*
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo
yum -y install epel-release
yum -y install mysql-mmm* mysql mysql-server mysql-devel
3.MySQL配置
/etc/init.d/mysqld start && chkconfig --level 35 mysqld on
mysqladmin -uroot password "123"
cp /usr/share/doc/mysql-server-5.1.73/my-medium.cnf /etc/my.cnf
vim /etc/my.cnf
    [mysqld]
    50 log-slave-updates
    58 server-id = 2
/etc/init.d/mysqld restart
4.授权并主主同步
mysql -u root -p
mysql> grant replication slave on *.* to 'slave'@'192.168.1.%' identified by '123';
mysql> show master status;
+------------------+----------+--------------+------------------+
| File             | Position | Binlog_Do_DB | Binlog_Ignore_DB |
+------------------+----------+--------------+------------------+
| mysql-bin.000001 |      481 |              |                  |
+------------------+----------+--------------+------------------+
1 row in set (0.00 sec)
mysql> change master to master_host='192.168.1.10',master_user='slave',master_password='123',master_log_file='mysql-bin.000001',master_log_pos=647;
//所跟IP、log、pos等信息都为第一台主的信息
mysql> start slave;
mysql> show slave status\G;

再部署两对主从复制（m1与s1，m2与s2）

Slave01

1.准备工作
vim /etc/sysconfig/network-scripts/ifcfg-eth0
    DEVICE=eth0
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=static
    IPADDR=192.168.1.30
    NETMASK=255.255.255.0
vim /etc/sysconfig/network-scripts/ifcfg-eth2
    DEVICE=eth2
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=dhcp
vim /etc/hosts
    192.168.1.10    db1
    192.168.1.20    db2
    192.168.1.30    db3
    192.168.1.40    db4
vim /etc/sysconfig/network
    HOSTNAME=db3
reboot
2.YUM源配置并安装MMM
rm -rf /etc/yum.repos.d/*
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo
yum -y install epel-release
yum -y install mysql-mmm* mysql mysql-server mysql-devel
3.MySQL配置
/etc/init.d/mysqld start && chkconfig --level 35 mysqld on
mysqladmin -uroot password "123"
cp /usr/share/doc/mysql-server-5.1.73/my-medium.cnf /etc/my.cnf
vim /etc/my.cnf
    [mysqld]
    50 relay-log=relay-log-bin
    51 relay-log-index=slave-relay-bin.index
    59 server-id = 3
/etc/init.d/mysqld restart
4.授权并主从同步（m1,s1）
mysql -u root -p
mysql> change master to master_host='192.168.1.10',master_user='slave',master_password='123',master_log_file='mysql-bin.000001',master_log_pos=647;
//所跟IP、log、pos等信息都为第一台主的信息
mysql> start slave;
mysql> show slave status\G;

Slave02

1.准备工作
vim /etc/sysconfig/network-scripts/ifcfg-eth0
    DEVICE=eth0
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=static
    IPADDR=192.168.1.40
    NETMASK=255.255.255.0
vim /etc/sysconfig/network-scripts/ifcfg-eth2
    DEVICE=eth2
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=dhcp
vim /etc/hosts
    192.168.1.10    db1
    192.168.1.20    db2
    192.168.1.30    db3
    192.168.1.40    db4
2.YUM源配置并安装MMM
rm -rf /etc/yum.repos.d/*
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo
yum -y install epel-release
yum -y install mysql-mmm* mysql mysql-server mysql-devel
3.MySQL配置
/etc/init.d/mysqld start && chkconfig --level 35 mysqld on
mysqladmin -uroot password "123"
cp /usr/share/doc/mysql-server-5.1.73/my-medium.cnf /etc/my.cnf
vim /etc/my.cnf
    [mysqld]
    50 relay-log=relay-log-bin
    51 relay-log-index=slave-relay-bin.index
    59 server-id = 4
/etc/init.d/mysqld restart
4.授权并主从同步（m2,s2）
mysql -u root -p
mysql> change master to master_host='192.168.1.20',master_user='slave',master_password='123',master_log_file='mysql-bin.000001',master_log_pos=647;
//所跟IP、log、pos等信息都为第二台主的信息
mysql> start slave;
mysql> show slave status\G;

配置高可用MySQL-MMM

Master01

1.新建授权用户
mysql> grant super,replication client,process on *.* to 'mmm_agent'@'192.168.1.%' identified by '123';//主服务器授权，从服务器自动同步
mysql> grant replication client on *.* to 'mmm_monitor'@'192.168.1.%' identified by '123';           //主服务器授权，从服务器自动同步
mysql> grant all on *.* to 'test'@'192.168.1.%' identified by '123';                    //新建测试用户
2.配置MMM_COMMON
vim /etc/mysql-mmm/mmm_common.conf
    active_master_role      writer
    <host default>
            cluster_interface       eth0                    //集群IP承载的接口
            pid_path                /var/run/mysql-mmm/mmm_agentd.pid       //PID文件位置(存放MMM的进程号)
            bin_path                /usr/libexec/mysql-mmm/         //运行命令位置
            replication_user        slave                   //需使用主从同步时授权用户
            replication_password    123
            agent_user              mmm_agent                   //代理连接
            agent_password          123
    </host>
    <host db1>
            ip      192.168.1.10
            mode    master
            peer    db2                     //当db1主机不能使用，自动切换到db2
    </host>
    <host db2>
            ip      192.168.1.20
            mode    master                  //当前服务器作为主服务器(写)
            peer    db1                     //当db2主机不能使用，自动切换到db1
    </host>
    <host db3>
            ip      192.168.1.30
            mode    slave
    </host>
    <host db4>
            ip      192.168.1.40
            mode    slave                   //当前主机作为从服务器(读)
    </host>
    <role writer>
            hosts   db1, db2
            ips     192.168.1.250               //写服务器VIP
            mode    exclusive                   //只有一个host可以writer
    </role>
    <role reader>
            hosts   db3, db4
            ips     192.168.1.251, 192.168.1.252        //读服务器VIP
            mode    balanced                    //多个host可以reader
    </role>
3.配置MMM_AGENT
vim /etc/mysql-mmm/mmm_agent.conf
include mmm_common.conf
this db1
4.拷贝文件给其余主机
scp /etc/mysql-mmm/mmm_common.conf root@192.168.1.20:/etc/mysql-mmm/
scp /etc/mysql-mmm/mmm_common.conf root@192.168.1.30:/etc/mysql-mmm/
scp /etc/mysql-mmm/mmm_common.conf root@192.168.1.40:/etc/mysql-mmm/
/etc/init.d/mysql-mmm-agent restart && chkconfig --level 35 mysql-mmm-agent on

Master02

配置MMM_AGENT
vim /etc/mysql-mmm/mmm_agent.conf
this db2
/etc/init.d/mysql-mmm-agent restart && chkconfig --level 35 mysql-mmm-agent on

Slave01

配置MMM_AGENT
vim /etc/mysql-mmm/mmm_agent.conf
this db3
/etc/init.d/mysql-mmm-agent restart && chkconfig --level 35 mysql-mmm-agent on

Slave02

配置MMM_AGENT
vim /etc/mysql-mmm/mmm_agent.conf
this db4
/etc/init.d/mysql-mmm-agent restart && chkconfig --level 35 mysql-mmm-agent on

监控配置（mmm_mon）

1.准备工作
vim /etc/sysconfig/network-scripts/ifcfg-eth0
    DEVICE=eth0
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=static
    IPADDR=192.168.1.50
    NETMASK=255.255.255.0
vim /etc/sysconfig/network-scripts/ifcfg-eth2
    DEVICE=eth2
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=dhcp
vim /etc/hosts
    192.168.1.10    db1
    192.168.1.20    db2
    192.168.1.30    db3
    192.168.1.40    db4
reboot
2.YUM源配置并安装MMM
rm -rf /etc/yum.repos.d/*
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo
yum -y install epel-release
yum -y install mysql-mmm* mysql
3.配置MMM_COMMON
scp 192.168.1.10:/etc/mysql-mmm/mmm_common.conf /etc/mysql-mmm/
4.配置MMM_MON
vim /etc/mysql-mmm/mmm_mon.conf
    include mmm_common.conf
    <monitor>
            ip                  127.0.0.1
            ping_ips            192.168.1.10,192.168.1.20,192.168.1.30,192.168.1.40
    </monitor>
    <host default>
            monitor_user        mmm_monitor
            monitor_password    123
    </host>
    debug 0
5.启动服务并验证
/etc/init.d/mysql-mmm-monitor restart && chkconfig --level 35 mysql-mmm-monitor on  //监控端启动
mmm_control show                                    //查看节点状态
mysql -u test -p -h 192.168.1.250

报错解决方案：

[root@localhost ~]# mysql -u test -p -h 192.168.1.250
Enter password:
ERROR 2003 (HY000): Can't connect to MySQL server on '192.168.1.254' (113)

主服务器：

grant super,replication client,process on *.* to 'mmm_agent'@'db1' identified by '123';
grant super,replication client,process on *.* to 'mmm_agent'@'db2' identified by '123';
grant super,replication client,process on *.* to 'mmm_agent'@'db3' identified by '123';
grant super,replication client,process on *.* to 'mmm_agent'@'db4' identified by '123';

日志查看：

tail -f /var/log/mysql-mmm/mmm_agentd.log                       //MySQL端的Agent日志
tail -f /var/log/mysql-mmm/mmm_mond.log                     //监控机端的Monitor日志

部署读写调度器Amoeba

1.环境准备
vim /etc/sysconfig/network-scripts/ifcfg-eth0
    DEVICE=eth0
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=static
    IPADDR=192.168.1.254
    NETMASK=255.255.255.0
2.安装jdk与amoeba
yum -y erase java-*
chmod +x jdk-6u14-linux-x64.bin
./jdk-6u14-linux-x64.bin
mv jdk1.6.0_14/ /usr/local/jdk1.6
vim /etc/profile
export JAVA_HOME=/usr/local/jdk1.6
export CLASSPATH=$CLASSPATH:$JAVA_HOME/lib:$JAVA_HOME/jre/lib
export PATH=$JAVA_HOME/lib:$JAVA_HOME/jre/bin/:$PATH:$HOME/bin
export AMOEBA_HOME=/usr/local/amoeba
export PATH=$PATH:$AMOEBA_HOME/bin
source /etc/profile && java -version
mkdir /usr/local/amoeba
tar zxvf amoeba-mysql-binary-2.2.0.tar.gz -C /usr/local/amoeba/
chmod -R 755 /usr/local/amoeba/
3.在主Mysql数据库新建授权用户
mysql -u root -p
    mysql> grant all on *.* to haha@'192.168.1.%' identified by '123';
4.编辑amoeba配置文件
vim /usr/local/amoeba/conf/amoeba.xml
 30                <property name="user">hehe</property>            //设置连接Amoeba用户
 31
 32                <property name="password">123</property>         //设置连接Amoeba用户
115                 <property name="defaultPool">slaves</property>
116
117                 <property name="writePool">master</property>        注意删除<!--  -->的注释
118                 <property name="readPool">slaves</property>         //定义读服务器池
vim /usr/local/amoeba/conf/dbServers.xml
 25                         <!-- mysql user -->
 26                         <property name="user">haha</property>               //设置连接Mysql的用户
 27
 28                         <property name="password">123</property>                //设置连接mysql的密码
注意删除<!--  -->的注释
 43         <dbServer name="master"  parent="abstractServer">
 44                 <factoryConfig>
 45                         <!-- mysql ip -->
 46                         <property name="ipAddress">192.168.1.254</property>         //定义写服务器IP
 47                 </factoryConfig>
 48         </dbServer>
 49         <dbServer name="slave1"  parent="abstractServer">
 50                 <factoryConfig>
 51                         <!-- mysql ip -->
 52                         <property name="ipAddress">192.168.1.30</property>          //定义读服务器IP
 53                 </factoryConfig>
 54         </dbServer>
 55         <dbServer name="slave2"  parent="abstractServer">
 56                 <factoryConfig>
 57                         <!-- mysql ip -->
 58                         <property name="ipAddress">192.168.1.40</property>          //定义读服务器IP
 59                 </factoryConfig>
 60
 61         </dbServer>
 62         <dbServer name="slaves" virtual="true">
 68                         <property name="poolNames">slave1,slave2</property>     //定义输入slaves读服务器池的主机
 69                 </poolConfig>
amoeba start &
netstat -utpln | grep 8066
5.连接测试
client：mysql -u hehe -p -h 192.168.1.254 -P 8066
推荐阅读：
  1. Memcache高可用群集
  2. MHA高可用群集详细介绍

免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。

高可用 mysql mmm

上一篇：MySql之分区分表

下一篇：进程锁进程池

相关阅读

您好，登录后才能下订单哦！

密码登录
登录注册
获取短信验证码
其他方式登录
点击 登录注册 即表示同意《亿速云用户服务条款》
产品服务
地区划分
帮助支持
关于我们
行业资讯-文章归档 问答-问答归档
广州亿速云计算有限公司

7*24小时在线电话：400-100-2938

7*24小时在线QQ：800811969

Copyright © Yisu Cloud Ltd. All Rights Reserved. 2018 版权所有
粤ICP备17096448号-1 粤公网安备 44010402001142号