您好，登录后才能下订单哦！
密码登录
登录注册
点击 登录注册 即表示同意《亿速云用户服务条款》
这篇文章将为大家详细讲解有关天环境下Openssh-7.9p1升级以及系统调优，文章内容质量较高，因此小编分享给大家做个参考，希望大家阅读完这篇文章后对相关知识有一定的了解。
Openssh-7.9p1-Openssl1.0.2q-zlib-1.2.11升级+系统调优
Last login: Tue Nov 27 00:55:36 2018
[root@localhost ~]#
[root@localhost ~]# mkdir -p /soft
[root@localhost ~]#
[root@localhost ~]#
[root@localhost ~]# cat /etc/redhat-release
CentOS Linux release 7.4.1708 (Core)
[root@localhost ~]#
关闭防火墙
[root@localhost ~]# systemctl stop firewalld.service
[root@localhost ~]#
[root@localhost ~]# systemctl disable firewalld.service
Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
查看防火墙
[root@localhost ~]#
[root@localhost ~]# systemctl status firewalld.service
● firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
Active: inactive (dead)
Docs: man:firewalld(1)
Nov 27 00:52:26 localhost.localdomain systemd[1]: Starting firewalld - dynamic firewall daemon...
Nov 27 00:52:26 localhost.localdomain systemd[1]: Started firewalld - dynamic firewall daemon.
Nov 27 00:52:27 localhost.localdomain firewalld[828]: WARNING: ICMP type 'beyond-scope' is not supported by the kernel for ipv6.
Nov 27 00:52:27 localhost.localdomain firewalld[828]: WARNING: beyond-scope: INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
Nov 27 00:52:27 localhost.localdomain firewalld[828]: WARNING: ICMP type 'failed-policy' is not supported by the kernel for ipv6.
Nov 27 00:52:27 localhost.localdomain firewalld[828]: WARNING: failed-policy: INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
Nov 27 00:52:27 localhost.localdomain firewalld[828]: WARNING: ICMP type 'reject-route' is not supported by the kernel for ipv6.
Nov 27 00:52:27 localhost.localdomain firewalld[828]: WARNING: reject-route: INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
Nov 27 01:15:45 localhost.localdomain systemd[1]: Stopping firewalld - dynamic firewall daemon...
Nov 27 01:15:47 localhost.localdomain systemd[1]: Stopped firewalld - dynamic firewall daemon.
[root@localhost ~]#
[root@localhost ~]#
配置YUM源
[root@localhost ~]# vi /etc/yum.conf
[centosdvd]
name=centosdvd
baseurl=file:///mnt
enabled=1
gpgcheck=0
[main]
cachedir=/var/cache/yum/$basearch/$releasever
keepcache=0
debuglevel=2
logfile=/var/log/yum.log
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1
installonly_limit=5
bugtracker_url=http://bugs.centos.org/set_project.php?project_id=23&ref=http://bugs.centos.org/bug_report_page.php?category=yum
distroverpkg=centos-release
# This is the default, if you make this bigger yum won't see if the metadata
# is newer on the remote and so you'll "gain" the bandwidth of not having to
# download the new metadata and "pay" for it by yum not having correct
# information.
# It is esp. important, to have correct metadata, for distributions like
# Fedora which don't keep old packages around. If you don't like this checking
# interupting your command line usage, it's much better to have something
# manually check the metadata once an hour (yum-updatesd will do this).
# metadata_expire=90m
# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d
备份系统自带YUM
[root@localhost ~]#
[root@localhost ~]#
yum/ yum.conf yum.repos.d/
[root@localhost ~]# mkdir -p /etc/yum.repos.d/bak20181127
[root@localhost ~]#
[root@localhost ~]# mv /etc/yum.repos.d/*.repo /etc/yum.repos.d/bak20181127/
[root@localhost ~]#
[root@localhost ~]# ls -l /etc/yum.repos.d/
total 0
drwxr-xr-x. 2 root root 187 Nov 27 01:17 bak20181127
[root@localhost ~]#
挂接系统镜像文件
[root@localhost ~]# mkdir -p /mnt
[root@localhost ~]#
[root@localhost ~]# mount -o loop /soft/CentOS-7.4-x86_64-Everything-1708.iso /mnt/
mount: /dev/loop0 is write-protected, mounting read-only
[root@localhost ~]#
清除YUM缓存
[root@localhost ~]# yum clean all
Loaded plugins: fastestmirror
Cleaning repos: centosdvd
Cleaning up everything
Maybe you want: rm -rf /var/cache/yum, to also free up space taken by orphaned data from disabled or removed repos
[root@localhost ~]#
制作YUM缓存
[root@localhost ~]# yum makecache
Loaded plugins: fastestmirror
centosdvd | 3.6 kB 00:00:00
(1/4): centosdvd/group_gz | 156 kB 00:00:00
(2/4): centosdvd/primary_db | 5.7 MB 00:00:00
(3/4): centosdvd/filelists_db | 6.7 MB 00:00:00
(4/4): centosdvd/other_db | 2.5 MB 00:00:00
Determining fastest mirrors
Metadata Cache Created
[root@localhost ~]#
查看YUM
[root@localhost ~]# yum list
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Installed Packages
GeoIP.x86_64 1.5.0-11.el7 @anaconda
NetworkManager.x86_64 1:1.8.0-9.el7 @anaconda
NetworkManager-libnm.x86_64 1:1.8.0-9.el7 @anaconda
NetworkManager-team.x86_64 1:1.8.0-9.el7 @anaconda
NetworkManager-tui.x86_64 1:1.8.0-9.el7 @anaconda
NetworkManager-wifi.x86_64 1:1.8.0-9.el7 @anaconda
acl.x86_64 2.2.51-12.el7 @anaconda
aic94xx-firmware.noarch 30-6.el7 @anaconda
alsa-firmware.noarch 1.0.28-2.el7 @anaconda
alsa-lib.x86_64 1.1.3-3.el7 @anaconda
alsa-tools-firmware.x86_64 1.1.0-1.el7 @anaconda
audit.x86_64 2.7.6-3.el7 @anaconda
audit-libs.x86_64 2.7.6-3.el7 @anaconda
authconfig.x86_64 6.2.8-30.el7 @anaconda
basesystem.noarch 10.0-7.el7.centos @anaconda
bash.x86_64 4.2.46-28.el7 @anaconda
bind-libs-lite.x86_64 32:9.9.4-50.el7 @anaconda
bind-license.noarch 32:9.9.4-50.el7 @anaconda
binutils.x86_64 2.25.1-31.base.el7 @anaconda
biosdevname.x86_64 0.7.2-2.el7 @anaconda
…………………………………………………………省略…………………………………………………………………………………………………
zsh-html.x86_64 5.0.2-28.el7 centosdvd
zziplib.i686 0.13.62-5.el7 centosdvd
zziplib.x86_64 0.13.62-5.el7 centosdvd
zziplib-devel.i686 0.13.62-5.el7 centosdvd
zziplib-devel.x86_64 0.13.62-5.el7 centosdvd
zziplib-utils.x86_64 0.13.62-5.el7 centosdvd
[root@localhost ~]#
[root@localhost ~]# ifconfig -a
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.95.11 netmask 255.255.255.0 broadcast 192.168.95.255
inet6 fe80::56ae:158f:89dd:b662 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:df:9e:6b txqueuelen 1000 (Ethernet)
RX packets 37952144 bytes 11893770589 (11.0 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 11114198 bytes 790613626 (753.9 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 448 bytes 38976 (38.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 448 bytes 38976 (38.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
安装telnet服务并启用
因升级OpenSSH过程中需要卸载现有OpenSSH, 因此为了保持服务器的远程连接可用，需
要启用telnet服务作为替代，如升级出现问题，也可通过telnet登录服务器进行回退。
同时安装telnet守护进程：xinetd
安装telnet服务
[root@localhost ~]#
[root@localhost ~]# yum install telnet* xinetd y
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package telnet.x86_64 1:0.17-64.el7 will be installed
---> Package xinetd.x86_64 2:2.3.15-13.el7 will be installed
---> Package telnet-server.x86_64 1:0.17-64.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================================================================================================
Package Arch Version Repository Size
================================================================================================================================================================
Installing:
telnet-server x86_64 1:0.17-64.el7 centosdvd 41 k
Dependencies Resolved
================================================================================================================================================================
Package Arch Version Repository Size
================================================================================================================================================================
Installing:
telnet x86_64 1:0.17-64.el7 centosdvd 64 k
xinetd x86_64 2:2.3.15-13.el7 centosdvd 128 k
Transaction Summary
================================================================================================================================================================
Install 3 Packages
Total download size: 192 k
Installed size: 374 k
Is this ok [y/d/N]: y
Downloading packages:
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Total 1.5 MB/s | 192 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : 2:xinetd-2.3.15-13.el7.x86_64 1/2
Installing : 1:telnet-0.17-64.el7.x86_64
Installing : 3:telnet-server-0.17-64.el7.x86_64 1/1
Verifying : 3:telnet-server-0.17-64.el7.x86_64 2/2
Verifying : 1:telnet-0.17-64.el7.x86_64 1/2
Verifying : 2:xinetd-2.3.15-13.el7.x86_64 2/2
Installed:
telnet.x86_64 1:0.17-64.el7 xinetd.x86_64 2:2.3.15-13.el7
Complete!
[root@localhost ~]#
[root@localhost ~]#
[root@localhost ~]# rpm -qa|grep telnet
telnet-0.17-64.el7.x86_64
[root@localhost ~]#
[root@localhost ~]#
[root@localhost ~]# rpm -qa|grep xinetd
xinetd-2.3.15-13.el7.x86_64
[root@localhost ~]#
将xinetd服务加入开机自启动
[root@localhost ~]# systemctl enable xinetd.service
[root@localhost ~]#
将telnet服务加入开机自启动
[root@localhost ~]# systemctl enable telnet.socket
Created symlink from /etc/systemd/system/sockets.target.wants/telnet.socket to /usr/lib/systemd/system/telnet.socket.
[root@localhost ~]#
重启服务：
由于telnet服务也是由xinetd守护的，所以安装完telnet-server，要启动telnet服务就必须重新启动xinetd
[root@localhost ~]#
[root@localhost ~]# systemctl restart telnet.socket
[root@localhost ~]#
[root@localhost ~]# systemctl restart xinetd
[root@localhost ~]#
[root@localhost ~]#
配置telnet root用户访问
linux默认情况下root用户使用telnet是登录不了的，需要修改/etc/secrueety文件末尾加入pts/1、pts/2、pts/3或者可以把secrueety文件重命名均可；
[root@localhost ~]# vi /etc/securetty
console
vc/1
vc/2
vc/3
vc/4
vc/5
vc/6
vc/7
vc/8
vc/9
vc/10
vc/11
tty1
tty2
tty3
tty4
tty5
tty6
tty7
tty8
tty9
tty10
tty11
ttyS0
ttysclp0
sclp_line0
3270/tty1
hvc0
hvc1
hvc2
hvc3
hvc4
hvc5
hvc6
hvc7
hvsi0
hvsi1
hvsi2
xvc0
pts/1
pts/2
pts/3
"/etc/securetty" 43L, 245C written
[root@localhost ~]#
[root@localhost ~]#
[root@localhost ~]# telnet 192.168.95.11 23
Trying 192.168.95.11...
Connected to 192.168.95.11.
Escape character is '^]'.
Kernel 3.10.0-693.el7.x86_64 on an x86_64
localhost login: root
Password:
Last login: Tue Nov 27 01:04:04 from 192.168.95.1
[root@localhost ~]#
[root@localhost ~]#
[root@localhost ~]# exit
logout
Connection closed by foreign host.
[root@localhost ~]#
关闭Selinux
[root@localhost ~]#
[root@localhost ~]# vi /etc/sysconfig/selinux
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
#SELINUX=enforcing
SELINUX=disabled
# SELINUXTYPE= can take one of three two values:
# targeted - Targeted processes are protected,
# minimum - Modification of targeted policy. Only selected processes are protected.
# mls - Multi Level Security protection.
SELINUXTYPE=targeted
[root@localhost ~]#
[root@localhost ~]# setenforce 0
[root@localhost ~]#
[root@localhost ~]#
安装编译所需工具包
[root@localhost ~]#
[root@localhost ~]# yum -y install gcc pamdevel zlibdevel perl
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package gcc.x86_64 0:4.8.5-16.el7 will be installed
--> Processing Dependency: cpp = 4.8.5-16.el7 for package: gcc-4.8.5-16.el7.x86_64
--> Processing Dependency: glibc-devel >= 2.2.90-12 for package: gcc-4.8.5-16.el7.x86_64
--> Processing Dependency: libmpfr.so.4()(64bit) for package: gcc-4.8.5-16.el7.x86_64
--> Processing Dependency: libmpc.so.3()(64bit) for package: gcc-4.8.5-16.el7.x86_64
---> Package perl.x86_64 4:5.16.3-292.el7 will be installed
--> Processing Dependency: perl-libs = 4:5.16.3-292.el7 for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Socket) >= 1.3 for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Scalar::Util) >= 1.10 for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl-macros for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl-libs for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(threads::shared) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(threads) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(constant) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Time::Local) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Time::HiRes) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Storable) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Socket) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Scalar::Util) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Pod::Simple::XHTML) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Pod::Simple::Search) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Getopt::Long) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Filter::Util::Call) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(File::Temp) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(File::Spec::Unix) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(File::Spec::Functions) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(File::Spec) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(File::Path) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Exporter) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Cwd) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Carp) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: libperl.so()(64bit) for package: 4:perl-5.16.3-292.el7.x86_64
--> Running transaction check
---> Package cpp.x86_64 0:4.8.5-16.el7 will be installed
---> Package glibc-devel.x86_64 0:2.17-196.el7 will be installed
--> Processing Dependency: glibc-headers = 2.17-196.el7 for package: glibc-devel-2.17-196.el7.x86_64
--> Processing Dependency: glibc-headers for package: glibc-devel-2.17-196.el7.x86_64
---> Package libmpc.x86_64 0:1.0.1-3.el7 will be installed
---> Package mpfr.x86_64 0:3.1.1-4.el7 will be installed
---> Package perl-Carp.noarch 0:1.26-244.el7 will be installed
---> Package perl-Exporter.noarch 0:5.68-3.el7 will be installed
---> Package perl-File-Path.noarch 0:2.09-2.el7 will be installed
---> Package perl-File-Temp.noarch 0:0.23.01-3.el7 will be installed
---> Package perl-Filter.x86_64 0:1.49-3.el7 will be installed
---> Package perl-Getopt-Long.noarch 0:2.40-2.el7 will be installed
--> Processing Dependency: perl(Pod::Usage) >= 1.14 for package: perl-Getopt-Long-2.40-2.el7.noarch
--> Processing Dependency: perl(Text::ParseWords) for package: perl-Getopt-Long-2.40-2.el7.noarch
---> Package perl-PathTools.x86_64 0:3.40-5.el7 will be installed
---> Package perl-Pod-Simple.noarch 1:3.28-4.el7 will be installed
--> Processing Dependency: perl(Pod::Escapes) >= 1.04 for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
--> Processing Dependency: perl(Encode) for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
---> Package perl-Scalar-List-Utils.x86_64 0:1.27-248.el7 will be installed
---> Package perl-Socket.x86_64 0:2.010-4.el7 will be installed
---> Package perl-Storable.x86_64 0:2.45-3.el7 will be installed
---> Package perl-Time-HiRes.x86_64 4:1.9725-3.el7 will be installed
---> Package perl-Time-Local.noarch 0:1.2300-2.el7 will be installed
---> Package perl-constant.noarch 0:1.27-2.el7 will be installed
---> Package perl-libs.x86_64 4:5.16.3-292.el7 will be installed
---> Package perl-macros.x86_64 4:5.16.3-292.el7 will be installed
---> Package perl-threads.x86_64 0:1.87-4.el7 will be installed
---> Package perl-threads-shared.x86_64 0:1.43-6.el7 will be installed
--> Running transaction check
---> Package glibc-headers.x86_64 0:2.17-196.el7 will be installed
--> Processing Dependency: kernel-headers >= 2.2.1 for package: glibc-headers-2.17-196.el7.x86_64
--> Processing Dependency: kernel-headers for package: glibc-headers-2.17-196.el7.x86_64
---> Package perl-Encode.x86_64 0:2.51-7.el7 will be installed
---> Package perl-Pod-Escapes.noarch 1:1.04-292.el7 will be installed
---> Package perl-Pod-Usage.noarch 0:1.63-3.el7 will be installed
--> Processing Dependency: perl(Pod::Text) >= 3.15 for package: perl-Pod-Usage-1.63-3.el7.noarch
--> Processing Dependency: perl-Pod-Perldoc for package: perl-Pod-Usage-1.63-3.el7.noarch
---> Package perl-Text-ParseWords.noarch 0:3.29-4.el7 will be installed
--> Running transaction check
---> Package kernel-headers.x86_64 0:3.10.0-693.el7 will be installed
---> Package perl-Pod-Perldoc.noarch 0:3.20-4.el7 will be installed
--> Processing Dependency: perl(parent) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
--> Processing Dependency: perl(HTTP::Tiny) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
---> Package perl-podlators.noarch 0:2.5.1-3.el7 will be installed
--> Running transaction check
---> Package perl-HTTP-Tiny.noarch 0:0.033-3.el7 will be installed
---> Package perl-parent.noarch 1:0.225-244.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================================================================================================
Package Arch Version Repository Size
================================================================================================================================================================
Installing:
gcc x86_64 4.8.5-16.el7 centosdvd 16 M
perl x86_64 4:5.16.3-292.el7 centosdvd …………………………………………………………………………省略………………………………………………………………………………………………
Installed:
gcc.x86_64 0:4.8.5-16.el7 perl.x86_64 4:5.16.3-292.el7
Dependency Installed:
cpp.x86_64 0:4.8.5-16.el7 glibc-devel.x86_64 0:2.17-196.el7 glibc-headers.x86_64 0:2.17-196.el7
kernel-headers.x86_64 0:3.10.0-693.el7 libmpc.x86_64 0:1.0.1-3.el7 mpfr.x86_64 0:3.1.1-4.el7
perl-Carp.noarch 0:1.26-244.el7 perl-Encode.x86_64 0:2.51-7.el7 perl-Exporter.noarch 0:5.68-3.el7
perl-File-Path.noarch 0:2.09-2.el7 perl-File-Temp.noarch 0:0.23.01-3.el7 perl-Filter.x86_64 0:1.49-3.el7
perl-Getopt-Long.noarch 0:2.40-2.el7 perl-HTTP-Tiny.noarch 0:0.033-3.el7 perl-PathTools.x86_64 0:3.40-5.el7
perl-Pod-Escapes.noarch 1:1.04-292.el7 perl-Pod-Perldoc.noarch 0:3.20-4.el7 perl-Pod-Simple.noarch 1:3.28-4.el7
perl-Pod-Usage.noarch 0:1.63-3.el7 perl-Scalar-List-Utils.x86_64 0:1.27-248.el7 perl-Socket.x86_64 0:2.010-4.el7
perl-Storable.x86_64 0:2.45-3.el7 perl-Text-ParseWords.noarch 0:3.29-4.el7 perl-Time-HiRes.x86_64 4:1.9725-3.el7
perl-Time-Local.noarch 0:1.2300-2.el7 perl-constant.noarch 0:1.27-2.el7 perl-libs.x86_64 4:5.16.3-292.el7
perl-macros.x86_64 4:5.16.3-292.el7 perl-parent.noarch 1:0.225-244.el7 perl-podlators.noarch 0:2.5.1-3.el7
perl-threads.x86_64 0:1.87-4.el7 perl-threads-shared.x86_64 0:1.43-6.el7
Complete!
[root@localhost ~]#
[root@localhost ~]#
升级ZLIB
解压zlib_1.2.11源码
[root@localhost ~]# cd /soft/
[root@localhost soft]# ls
CentOS-7.4-x86_64-Everything-1708.iso openssh-7.9p1.tar.gz openssl-1.0.2q.tar.gz zlib-1.2.11.tar.gz
[root@localhost soft]# tar -xvzf zlib-1.2.11.tar.gz
zlib配置检查
[root@localhost soft]#
[root@localhost soft]# cd zlib-1.2.11
[root@localhost zlib-1.2.11]# ls
adler32.c configure deflate.h gzguts.h infback.c inflate.h make_vms.com qnx trees.h zconf.h.cmakein zlib.h zutil.h
amiga contrib doc gzlib.c inffast.c inftrees.c msdos README uncompr.c zconf.h.in zlib.map
ChangeLog crc32.c examples gzread.c inffast.h inftrees.h nintendods test watcom zlib2ansi zlib.pc.cmakein
CMakeLists.txt crc32.h FAQ gzwrite.c inffixed.h Makefile old treebuild.xml win32 zlib.3 zlib.pc.in
compress.c deflate.c gzclose.c INDEX inflate.c Makefile.in os400 trees.c zconf.h zlib.3.pdf zutil.c
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# ./configure --prefix=/usr
Checking for gcc...
Checking for shared library support...
Building shared library libz.so.1.2.11 with gcc.
Checking for size_t... Yes.
Checking for off64_t... Yes.
Checking for fseeko... Yes.
Checking for strerror... Yes.
Checking for unistd.h... Yes.
Checking for stdarg.h... Yes.
Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf().
Checking for vsnprintf() in stdio.h... Yes.
Checking for return value of vsnprintf()... Yes.
Checking for attribute(visibility) support... Yes.
[root@localhost zlib-1.2.11]#
编译zlib库
[root@localhost zlib-1.2.11]# make
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o example.o test/example.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o adler32.o adler32.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o crc32.o crc32.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o deflate.o deflate.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o infback.o infback.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o inffast.o inffast.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o inflate.o inflate.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o inftrees.o inftrees.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o trees.o trees.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o zutil.o zutil.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o compress.o compress.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o uncompr.o uncompr.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o gzclose.o gzclose.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o gzlib.o gzlib.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o gzread.o gzread.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -c -o gzwrite.o gzwrite.c
ar rc libz.a adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o example example.o -L. libz.a
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o minigzip.o test/minigzip.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o minigzip minigzip.o -L. libz.a
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/adler32.o adler32.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/crc32.o crc32.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/deflate.o deflate.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/infback.o infback.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/inffast.o inffast.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/inflate.o inflate.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/inftrees.o inftrees.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/trees.o trees.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/zutil.o zutil.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/compress.o compress.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/uncompr.o uncompr.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/gzclose.o gzclose.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/gzlib.o gzlib.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/gzread.o gzread.c
gcc -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/gzwrite.o gzwrite.c
gcc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map -O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o libz.so.1.2.11 adler32.lo crc32.lo deflate.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo zutil.lo compress.lo uncompr.lo gzclose.lo gzlib.lo gzread.lo gzwrite.lo -lc
rm -f libz.so libz.so.1
ln -s libz.so.1.2.11 libz.so
ln -s libz.so.1.2.11 libz.so.1
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o examplesh example.o -L. libz.so.1.2.11
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o minigzipsh minigzip.o -L. libz.so.1.2.11
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o example64.o test/example.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o example64 example64.o -L. libz.a
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o minigzip64.o test/minigzip.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o minigzip64 minigzip64.o -L. libz.a
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]#
卸载当前zlib
注意：此步骤必须在步骤A执行完毕后再执行，否则先卸载zlib后，/lib64/目录下的zlib相
关库文件会被删除，步骤A编译zlib会失败。（补救措施：从其他相同系统的服务器上复
制/lib64、/usr/lib和/usr/lib64目录下的libcrypto.so.10、libssl.so.10、libz.so.1、libz.so.1.2.3
四个文件到相应目录即可。可通过whereis、locate或find命令找到这些文件的位置）
[root@localhost zlib-1.2.11]# rpm -qa|grep zlib
zlib-1.2.7-17.el7.x86_64
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# rpm -e --nodeps zlib
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# rpm -qa|grep zlib
rpm: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
[root@localhost zlib-1.2.11]#
安装之前编译好的zlib
[root@localhost zlib-1.2.11]# make install
rm -f /usr/lib/libz.a
cp libz.a /usr/lib
chmod 644 /usr/lib/libz.a
cp libz.so.1.2.11 /usr/lib
chmod 755 /usr/lib/libz.so.1.2.11
rm -f /usr/share/man/man3/zlib.3
cp zlib.3 /usr/share/man/man3
chmod 644 /usr/share/man/man3/zlib.3
rm -f /usr/lib/pkgconfig/zlib.pc
cp zlib.pc /usr/lib/pkgconfig
chmod 644 /usr/lib/pkgconfig/zlib.pc
rm -f /usr/include/zlib.h /usr/include/zconf.h
cp zlib.h zconf.h /usr/include
chmod 644 /usr/include/zlib.h /usr/include/zconf.h
[root@localhost zlib-1.2.11]#
共享库注册
zlib安装完成后，会在/usr/lib目录中生产zlib相关库文件，需要将这些共享库文件注册到系统
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# echo '/usr/lib' >> /etc/ld.so.conf
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# ll /etc/ld.so.conf
-rw-r--r--. 1 root root 37 Nov 27 01:38 /etc/ld.so.conf
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# cat /etc/ld.so.conf
include ld.so.conf.d/*.conf
/usr/lib
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# ll /usr/lib/libz.so.1
lrwxrwxrwx. 1 root root 14 Nov 27 01:38 /usr/lib/libz.so.1 -> libz.so.1.2.11
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# ll /usr/lib/libz.so
lrwxrwxrwx. 1 root root 14 Nov 27 01:38 /usr/lib/libz.so -> libz.so.1.2.11
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# ll /usr/lib/libz.so.1
lrwxrwxrwx. 1 root root 14 Nov 27 01:38 /usr/lib/libz.so.1 -> libz.so.1.2.11
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# ldconfig
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]#
升级OpenSSL
官方升级文档
http://www.linuxfromscratch.org/blfs/view/cvs/postlfs/openssl.html
备份当前openssl
[root@localhost zlib-1.2.11]# find / -name openssl
/etc/pki/ca-trust/extracted/openssl
/usr/bin/openssl
/usr/lib64/openssl
[root@localhost zlib-1.2.11]# mv /etc/pki/ca-trust/extracted/openssl /etc/pki/ca-trust/extracted/openssl.20181127.old
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# mv /usr/bin/openssl /usr/bin/openssl.20181127.old
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# mv /usr/lib64/openssl /usr/lib64/openssl.20181127.old
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# cp /usr/lib64/libcrypto.so.10 /usr/lib64/libcrypto.so.10.20181127.old
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# cp /usr/lib64/libssl.so.10 /usr/lib64/libssl.so.10.20181127.old
[root@localhost zlib-1.2.11]#
卸载当前openssl
[root@localhost zlib-1.2.11]# rpm -qa|grep openssl |xargs
openssl-1.0.2k-8.el7.x86_64 xmlsec1-openssl-1.2.20-5.el7.x86_64 openssl-libs-1.0.2k-8.el7.x86_64
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# rpm -qa|grep openssl|xargs -i rpm -e --nodeps {}
warning: file /usr/bin/openssl: remove failed: No such file or directory
warning: file /usr/lib64/openssl/engines/libubsec.so: remove failed: No such file or directory
warning: file /usr/lib64/openssl/engines/libsureware.so: remove failed: No such file or directory
warning: file /usr/lib64/openssl/engines/libpadlock.so: remove failed: No such file or directory
warning: file /usr/lib64/openssl/engines/libnuron.so: remove failed: No such file or directory
warning: file /usr/lib64/openssl/engines/libgmp.so: remove failed: No such file or directory
warning: file /usr/lib64/openssl/engines/libcswift.so: remove failed: No such file or directory
warning: file /usr/lib64/openssl/engines/libchil.so: remove failed: No such file or directory
warning: file /usr/lib64/openssl/engines/libcapi.so: remove failed: No such file or directory
warning: file /usr/lib64/openssl/engines/libatalla.so: remove failed: No such file or directory
warning: file /usr/lib64/openssl/engines/libaep.so: remove failed: No such file or directory
warning: file /usr/lib64/openssl/engines/lib4758cca.so: remove failed: No such file or directory
warning: file /usr/lib64/openssl/engines: remove failed: No such file or directory
warning: file /usr/lib64/openssl: remove failed: No such file or directory
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# rpm -qa|grep openssl|xargs -i rpm -e --nodeps {}
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# rpm -qa|grep openssl |xargs
解压openssl-1.0.2q.tar.gz源码
[root@localhost zlib-1.2.11]#
[root@localhost zlib-1.2.11]# cd ..
[root@localhost soft]# ls
CentOS-7.4-x86_64-Everything-1708.iso openssh-7.9p1.tar.gz openssl-1.0.2q.tar.gz zlib-1.2.11 zlib-1.2.11.tar.gz
[root@localhost soft]# tar -xvzf openssl-1.0.2q.tar.gz
[root@localhost soft]#
openssl配置检查
[root@localhost soft]# cd openssl-1.0.2q
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]# ls
ACKNOWLEDGMENTS CHANGES crypto e_os.h INSTALL INSTALL.OS2 LICENSE Makefile.shared openssl.doxy README.ASN1 tools
apps CHANGES.SSLeay demos FAQ install.com INSTALL.VMS MacOS makevms.com openssl.spec README.ENGINE util
appveyor.yml config doc GitConfigure INSTALL.DJGPP INSTALL.W32 Makefile ms os2 shlib VMS
bugs Configure engines GitMake INSTALL.MacOS INSTALL.W64 Makefile.bak Netware PROBLEMS ssl
certs CONTRIBUTING e_os2.h include INSTALL.NW INSTALL.WCE Makefile.org NEWS README test
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]# ./config --prefix=/usr --openssldir=/etc/ssl --shared zlib
Operating system: x86_64-whatever-linux2
Configuring for linux-x86_64
Configuring for linux-x86_64
…………………………………………………………………………省略…………………………………………………………………………………………
generating dummy tests (if needed)...
make[1]: Entering directory `/soft/openssl-1.0.2q/test'
md2test.c => dummytest.c
rc5test.c => dummytest.c
jpaketest.c => dummytest.c
make[1]: Leaving directory `/soft/openssl-1.0.2q/test'
Configured for linux-x86_64.
[root@localhost openssl-1.0.2q]#
openssl源码编译
[root@localhost openssl-1.0.2q]# make
making all in crypto...
make[1]: Entering directory `/soft/openssl-1.0.2q/crypto'
/usr/bin/perl ../util/mkbuildinf.pl "gcc -I. -I.. -I../include -fPIC -DOPENSSL_PIC -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,--noexecstack -m64 -DL_ENDIAN -O3 -Wall -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DRC4_ASM -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -DECP_NISTZ256_ASM" "linux-x86_64" >buildinf.h
………………………………………………………………………………省略…………………………………………………………………………………………
gcc -I.. -I../include -fPIC -DOPENSSL_PIC -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,--noexecstack -m64 -DL_ENDIAN -O3 -Wall -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DRC4_ASM -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -DECP_NISTZ256_ASM -c -o dummytest.o dummytest.c
make[2]: Entering directory `/soft/openssl-1.0.2q/test'
make[2]: Leaving directory `/soft/openssl-1.0.2q/test'
make[1]: Leaving directory `/soft/openssl-1.0.2q/test'
making all in tools...
make[1]: Entering directory `/soft/openssl-1.0.2q/tools'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/soft/openssl-1.0.2q/tools'
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]#
Openssl测试
[root@localhost openssl-1.0.2q]# make test
testing...
make[1]: Entering directory `/soft/openssl-1.0.2q/test'
make[2]: Entering directory `/soft/openssl-1.0.2q'
making all in apps...
make[3]: Entering directory `/soft/openssl-1.0.2q/apps'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/soft/openssl-1.0.2q/apps'
make[2]: Leaving directory `/soft/openssl-1.0.2q'
../util/shlib_wrap.sh ./destest
…………………………………………………………………………………省略……………………………………………………………………………………
ALL OCSP TESTS SUCCESSFUL
Test X509v3_check_*
../util/shlib_wrap.sh ./v3nametest
../util/shlib_wrap.sh ./heartbeat_test
Test constant time utilites
../util/shlib_wrap.sh ./constant_time_test
Testing constant time operations...
ok (ran 1908 tests)
test_verify_extra
../util/shlib_wrap.sh ./verify_extra_test
PASS
test_clienthello
../util/shlib_wrap.sh ./clienthellotest
test_sslv2conftest
……………………………………………………………………………………省略…………………………………………………………………………………
*
*---- START OF RECORD ----
** Record Content-type: 22
** Record Version: fefd
** Record Epoch: 1
** Record Sequence: 000000000000
** Record Length: 64
**---- START OF HANDSHAKE MESSAGE FRAGMENT ----
**---- HANDSHAKE MESSAGE FRAGMENT ENCRYPTED ----
*---- END OF RECORD ----
---- END OF PACKET ----
PASS
test_bad_dtls
../util/shlib_wrap.sh ./bad_dtls_test
test_fatalerr
../util/shlib_wrap.sh ./fatalerrtest ../apps/server.pem ../apps/server.pem
SSL_accept() failed -1, 1
140342688954048:error:140800FF:SSL routines:ssl3_accept:unknown state:s3_srvr.c:869:
test_x509_time
../util/shlib_wrap.sh ./x509_time_test
PASS
make[1]: Leaving directory `/soft/openssl-1.0.2q/test'
OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
OpenSSL 1.0.2q 20 Nov 2018
built on: reproducible build, date unspecified
platform: linux-x86_64
options: bn(64,64) rc4(16x,int) des(idx,cisc,16,int) idea(int) blowfish(idx)
compiler: gcc -I. -I.. -I../include -fPIC -DOPENSSL_PIC -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,--noexecstack -m64 -DL_ENDIAN -O3 -Wall -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DRC4_ASM -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -DECP_NISTZ256_ASM
OPENSSLDIR: "/etc/ssl"
[root@localhost openssl-1.0.2q]#
Openssl安装
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]# make install
making all in crypto...
make[1]: Entering directory `/soft/openssl-1.0.2q/crypto'
making all in crypto/objects...
……………………………………………………………………………………省略………………………………………………………………………………
installing libcrypto.a
installing libssl.a
installing libcrypto.so.1.0.0
installing libssl.so.1.0.0
make[1]: Entering directory `/usr/lib64'
make[2]: Entering directory `/usr/lib64'
make[2]: Leaving directory `/usr/lib64'
make[2]: Entering directory `/usr/lib64'
make[2]: Leaving directory `/usr/lib64'
make[1]: Leaving directory `/usr/lib64'
cp libcrypto.pc /usr/lib64/pkgconfig
chmod 644 /usr/lib64/pkgconfig/libcrypto.pc
cp libssl.pc /usr/lib64/pkgconfig
chmod 644 /usr/lib64/pkgconfig/libssl.pc
cp openssl.pc /usr/lib64/pkgconfig
chmod 644 /usr/lib64/pkgconfig/openssl.pc
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]#
验证Openssl升级是否成功
[root@localhost openssl-1.0.2q]# openssl version
OpenSSL 1.0.2q 20 Nov 2018
[root@localhost openssl-1.0.2q]#
恢复共享库
由于OpenSSL_1.0.2q不提供libcrypto.so.10和libssl.so.10这两个库，而yum、wget等工具又依赖此库，因此需要将先前备份的这两个库进行恢复，其他的可视情况考虑是否恢复。
[root@localhost openssl-1.0.2q]# mv /usr/lib64/libcrypto.so.10.20181127.old /usr/lib64/libcrypto.so.10
mv: overwrite ‘/usr/lib64/libcrypto.so.10’? y
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]# mv /usr/lib64/libssl.so.10.20181127.old /usr/lib64/libssl.so.10
mv: overwrite ‘/usr/lib64/libssl.so.10’? y
[root@localhost openssl-1.0.2q]#
Openssh安装前环境配置
[root@localhost openssl-1.0.2q]# mv /etc/ssh /etc/ssh.old
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]# rpm -qa|grep openssh
openssh-server-7.4p1-11.el7.x86_64
openssh-clients-7.4p1-11.el7.x86_64
openssh-7.4p1-11.el7.x86_64
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]# rpm -qa |grep openssh|xargs -i rpm -e --nodeps {}
warning: file /etc/ssh/sshd_config: remove failed: No such file or directory
warning: file /etc/ssh/ssh_config: remove failed: No such file or directory
warning: file /etc/ssh/moduli: remove failed: No such file or directory
warning: file /etc/ssh: remove failed: No such file or directory
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]# rpm -qa |grep openssh|xargs -i rpm -e --nodeps {}
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]# rpm -qa |grep openssh|xargs
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]# install -v -m700 -d /var/lib/sshd
install: creating directory ‘/var/lib/sshd’
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]# chown -v root:sys /var/lib/sshd
changed ownership of ‘/var/lib/sshd’ from root:root to root:sys
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]# groupadd -g 50 sshd
groupadd: group 'sshd' already exists
[root@localhost openssl-1.0.2q]#
[root@localhost openssl-1.0.2q]# useradd -c 'sshd PrivSep' -d /var/lib/sshd -g sshd -s /bin/false -u 50 sshd
useradd: user 'sshd' already exists
[root@localhost openssl-1.0.2q]#
解压openssh7.6p1.tar.gz源码
[root@localhost openssl-1.0.2q]# cd ..
[root@localhost soft]# ls
CentOS-7.4-x86_64-Everything-1708.iso openssh-7.9p1.tar.gz openssl-1.0.2q openssl-1.0.2q.tar.gz zlib-1.2.11 zlib-1.2.11.tar.gz
[root@localhost soft]# tar -xvzf openssh-7.9p1.tar.gz
[root@localhost soft]#
[root@localhost soft]# cd openssh-7.9p1
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]# ls
aclocal.m4 cipher-aesctr.c gss-genr.c moduli.0 README.dns ssh-add.1 sshlogin.c
addrmatch.c cipher-aesctr.h gss-serv.c moduli.5 README.platform ssh-add.c sshlogin.h
atomicio.c cipher.c gss-serv-krb5.c moduli.c README.privsep ssh-agent.0 ssh-pkcs11.c
atomicio.h cipher-chachapoly.c hash.c monitor.c README.tun ssh-agent.1 ssh-pkcs11-client.c
audit-bsm.c cipher-chachapoly.h hmac.c monitor_fdpass.c readpass.c ssh-agent.c ssh-pkcs11.h
audit.c cipher-ctr.c hmac.h monitor_fdpass.h regress ssh_api.c ssh-pkcs11-helper.0
audit.h cipher.h hostfile.c monitor.h rijndael.c ssh_api.h ssh-pkcs11-helper.8
audit-linux.c cleanup.c hostfile.h monitor_wrap.c rijndael.h sshbuf.c ssh-pkcs11-helper.c
auth3.c clientloop.c includes.h monitor_wrap.h sandbox-capsicum.c sshbuf-getput-basic.c sshpty.c
auth3-chall.c clientloop.h INSTALL msg.c sandbox-darwin.c sshbuf-getput-crypto.c sshpty.h
auth3-gss.c compat.c install-sh msg.h sandbox-null.c sshbuf.h ssh-rsa.c
auth3-hostbased.c compat.h kex.c mux.c sandbox-pledge.c sshbuf-misc.c ssh-sandbox.h
auth3-kbdint.c config.guess kexc25519.c myproposal.h sandbox-rlimit.c ssh.c sshtty.c
auth3-none.c config.h.in kexc25519c.c nchan2.ms sandbox-seccomp-filter.c ssh_config ssh-xmss.c
auth3-passwd.c config.sub kexc25519s.c nchan.c sandbox-solaris.c ssh_config.0 survey.sh.in
auth3-pubkey.c configure kexdh.c nchan.ms sandbox-systrace.c ssh_config.5 TODO
auth-bsdauth.c configure.ac kexdhc.c opacket.c sc25519.c sshconnect2.c ttymodes.c
auth.c contrib kexdhs.c opacket.h sc25519.h sshconnect.c ttymodes.h
authfd.c crc32.c kexecdh.c openbsd-compat scp.0 sshconnect.h uidswap.c
authfd.h crc32.h kexecdhc.c opensshd.init.in scp.1 sshd.0 uidswap.h
authfile.c CREDITS kexecdhs.c openssh.xml.in scp.c sshd.8 umac128.c
authfile.h crypto_api.h kexgex.c OVERVIEW servconf.c sshd.c umac.c
auth.h defines.h kexgexc.c packet.c servconf.h sshd_config umac.h
auth-krb5.c dh.c kexgexs.c packet.h serverloop.c sshd_config.0 utf8.c
auth-options.c dh.h kex.h pathnames.h serverloop.h sshd_config.5 utf8.h
auth-options.h digest.h krl.c pkcs11.h session.c ssh-dss.c uuencode.c
auth-pam.c digest-libc.c krl.h platform.c session.h ssh-ecdsa.c uuencode.h
auth-pam.h digest-openssl.c LICENCE platform.h sftp.0 ssh-ed25519.c verify.c
auth-passwd.c dispatch.c log.c platform-misc.c sftp.1 ssherr.c version.h
auth-rhosts.c dispatch.h log.h platform-pledge.c sftp.c ssherr.h xmalloc.c
auth-shadow.c dns.c loginrec.c platform-tracing.c sftp-client.c ssh-gss.h xmalloc.h
auth-sia.c dns.h loginrec.h poly1305.c sftp-client.h ssh.h xmss_commons.c
auth-sia.h ed25519.c logintest.c poly1305.h sftp-common.c sshkey.c xmss_commons.h
auth-skey.c entropy.c mac.c progressmeter.c sftp-common.h ssh-keygen.0 xmss_fast.c
bitmap.c entropy.h mac.h progressmeter.h sftp-glob.c ssh-keygen.1 xmss_fast.h
bitmap.h fatal.c Makefile.in PROTOCOL sftp.h ssh-keygen.c xmss_hash_address.c
buildpkg.sh.in fe25519.c match.c PROTOCOL.agent sftp-server.0 sshkey.h xmss_hash_address.h
canohost.c fe25519.h match.h PROTOCOL.certkeys sftp-server.8 ssh-keyscan.0 xmss_hash.c
canohost.h fixalgorithms md5crypt.c PROTOCOL.chacha20poly1305 sftp-server.c ssh-keyscan.1 xmss_hash.h
chacha.c fixpaths md5crypt.h PROTOCOL.key sftp-server-main.c ssh-keyscan.c xmss_wots.c
chacha.h ge25519_base.data mdoc2man.awk PROTOCOL.krl smult_curve25519_ref.c ssh-keysign.0 xmss_wots.h
ChangeLog ge25519.c misc.c PROTOCOL.mux ssh.0 ssh-keysign.8
channels.c ge25519.h misc.h readconf.c ssh.1 ssh-keysign.c
channels.h groupaccess.c mkinstalldirs readconf.h ssh3.h sshkey-xmss.c
cipher-aes.c groupaccess.h moduli README ssh-add.0 sshkey-xmss.h
[root@localhost openssh-7.9p1]#
Openssh配置检查
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]# ./configure --prefix=/usr --sysconfdir=/etc/ssh --with-md5-passwords --with-pam--with-zlib --with-openssl-includes=/usr --with-privsep-path=/var/lib/sshd
configure: WARNING: unrecognized options: --with-pam--with-zlib, --with-openssl-includes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
…………………………………………………………………………省略…………………………………………………………………………………………
configure: WARNING: unrecognized options: --with-pam--with-zlib, --with-openssl-includes
OpenSSH has been configured with the following options:
User binaries: /usr/bin
System binaries: /usr/sbin
Configuration files: /etc/ssh
Askpass program: /usr/libexec/ssh-askpass
Manual pages: /usr/share/man/manX
PID file: /var/run
Privilege separation chroot path: /var/lib/sshd
sshd default user PATH: /usr/bin:/bin:/usr/sbin:/sbin
Manpage format: doc
PAM support: no
OSF SIA support: no
KerberosV support: no
SELinux support: no
MD5 password support: yes
libedit support: no
libldns support: no
Solaris process contract support: no
Solaris project support: no
Solaris privilege support: no
IP address in $DISPLAY hack: no
Translate v4 in v6 hack: yes
BSD Auth support: no
Random number source: OpenSSL internal ONLY
Privsep sandbox style: seccomp_filter
Host: x86_64-pc-linux-gnu
Compiler: gcc
Compiler flags: -g -O2 -pipe -Wall -Wpointer-arith -Wuninitialized -Wsign-compare -Wformat-security -Wsizeof-pointer-memaccess -Wno-pointer-sign -Wno-unused-result -fno-strict-aliasing -D_FORTIFY_SOURCE=2 -ftrapv -fno-builtin-memset -fstack-protector-strong -fPIE
Preprocessor flags: -D_XOPEN_SOURCE=600 -D_BSD_SOURCE -D_DEFAULT_SOURCE
Linker flags: -Wl,-z,relro -Wl,-z,now -Wl,-z,noexecstack -fstack-protector-strong -pie
Libraries: -lcrypto -ldl -lutil -lz -lcrypt -lresolv
编译Openssh
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]# make
conffile=`echo sshd_config.out | sed 's/.out$//'`; \
/usr/bin/sed -e 's|/etc/ssh/ssh_config|/etc/ssh/ssh_config|g' -e 's|/etc/ssh/ssh_known_hosts|/etc/ssh/ssh_known_hosts|g' -e 's|/etc/ssh/sshd_config|/etc/ssh/sshd_config|g' -e 's|/usr/libexec|/usr/libexec|g' -e 's|/etc/shosts.equiv|/etc/ssh/shosts.equiv|g' -e 's|/etc/ssh/ssh_host_key|/etc/ssh/ssh_host_key|g' -e 's|/etc/ssh/ssh_host_ecdsa_key|/etc/ssh/ssh_host_ecdsa_key|g' -e 's|/etc/ssh/ssh_host_dsa_key|/etc/ssh/ssh_host_dsa_key|g' -e 's|/etc/ssh/ssh_host_rsa_key|/etc/ssh/ssh_host_rsa_key|g' -e 's|/etc/ssh/ssh_host_ed25519_key|/etc/ssh/ssh_host_ed25519_key|g' -e 's|/var/run/sshd.pid|/var/run/sshd.pid|g' -e 's|/etc/moduli|/etc/ssh/moduli|g' -e 's|/etc/ssh/moduli|/etc/ssh/moduli|g' -e 's|/etc/ssh/sshrc|/etc/ssh/sshrc|g' -e 's|/usr/X11R6/bin/xauth|undefined|g' -e 's|/var/empty|/var/lib/sshd|g' -e 's|/usr/bin:/bin:/usr/sbin:/sbin|/usr/bin:/bin:/usr/sbin:/sbin|g' ./${conffile} > sshd_config.out
………………………………………………………………………………………省略………………………………………………………………………………
gcc -o sftp progressmeter.o sftp.o sftp-client.o sftp-common.o sftp-glob.o -L. -Lopenbsd-compat/ -Wl,-z,relro -Wl,-z,now -Wl,-z,noexecstack -fstack-protector-strong -pie -lssh -lopenbsd-compat -lcrypto -ldl -lutil -lz -lcrypt -lresolv
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]#
安装Openssh
[root@localhost openssh-7.9p1]# make install
(cd openbsd-compat && make)
make[1]: Entering directory `/soft/openssh-7.9p1/openbsd-compat'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/soft/openssh-7.9p1/openbsd-compat'
/usr/bin/mkdir -p /usr/bin
/usr/bin/mkdir -p /usr/sbin
/usr/bin/mkdir -p /usr/share/man/man1
/usr/bin/mkdir -p /usr/share/man/man5
/usr/bin/mkdir -p /usr/share/man/man8
/usr/bin/mkdir -p /usr/libexec
/usr/bin/mkdir -p -m 0755 /var/lib/sshd
/usr/bin/install -c -m 0755 -s ssh /usr/bin/ssh
/usr/bin/install -c -m 0755 -s scp /usr/bin/scp
/usr/bin/install -c -m 0755 -s ssh-add /usr/bin/ssh-add
/usr/bin/install -c -m 0755 -s ssh-agent /usr/bin/ssh-agent
/usr/bin/install -c -m 0755 -s ssh-keygen /usr/bin/ssh-keygen
/usr/bin/install -c -m 0755 -s ssh-keyscan /usr/bin/ssh-keyscan
/usr/bin/install -c -m 0755 -s sshd /usr/sbin/sshd
/usr/bin/install -c -m 4711 -s ssh-keysign /usr/libexec/ssh-keysign
/usr/bin/install -c -m 0755 -s ssh-pkcs11-helper /usr/libexec/ssh-pkcs11-helper
/usr/bin/install -c -m 0755 -s sftp /usr/bin/sftp
/usr/bin/install -c -m 0755 -s sftp-server /usr/libexec/sftp-server
/usr/bin/install -c -m 644 ssh.1.out /usr/share/man/man1/ssh.1
/usr/bin/install -c -m 644 scp.1.out /usr/share/man/man1/scp.1
/usr/bin/install -c -m 644 ssh-add.1.out /usr/share/man/man1/ssh-add.1
/usr/bin/install -c -m 644 ssh-agent.1.out /usr/share/man/man1/ssh-agent.1
/usr/bin/install -c -m 644 ssh-keygen.1.out /usr/share/man/man1/ssh-keygen.1
/usr/bin/install -c -m 644 ssh-keyscan.1.out /usr/share/man/man1/ssh-keyscan.1
/usr/bin/install -c -m 644 moduli.5.out /usr/share/man/man5/moduli.5
/usr/bin/install -c -m 644 sshd_config.5.out /usr/share/man/man5/sshd_config.5
/usr/bin/install -c -m 644 ssh_config.5.out /usr/share/man/man5/ssh_config.5
/usr/bin/install -c -m 644 sshd.8.out /usr/share/man/man8/sshd.8
/usr/bin/install -c -m 644 sftp.1.out /usr/share/man/man1/sftp.1
/usr/bin/install -c -m 644 sftp-server.8.out /usr/share/man/man8/sftp-server.8
/usr/bin/install -c -m 644 ssh-keysign.8.out /usr/share/man/man8/ssh-keysign.8
/usr/bin/install -c -m 644 ssh-pkcs11-helper.8.out /usr/share/man/man8/ssh-pkcs11-helper.8
/usr/bin/mkdir -p /etc/ssh
ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519
/usr/sbin/sshd -t -f /etc/ssh/sshd_config
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]#
Openssh安装后环境配置
# 在openssh编译目录执行如下命令
[root@localhost openssh-7.9p1]# install -v -m755 contrib/ssh-copy-id /usr/bin
‘contrib/ssh-copy-id’ -> ‘/usr/bin/ssh-copy-id’
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]# install -v -m644 contrib/ssh-copy-id.1 /usr/share/man/man1
‘contrib/ssh-copy-id.1’ -> ‘/usr/share/man/man1/ssh-copy-id.1’
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]# install -v -m755 -d /usr/share/doc/openssh-7.9p1
install: creating directory ‘/usr/share/doc/openssh-7.9p1’
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]# install -v -m644 INSTALL LICENCE OVERVIEW README* /usr/share/doc/openssh-7.9p1
‘INSTALL’ -> ‘/usr/share/doc/openssh-7.9p1/INSTALL’
‘LICENCE’ -> ‘/usr/share/doc/openssh-7.9p1/LICENCE’
‘OVERVIEW’ -> ‘/usr/share/doc/openssh-7.9p1/OVERVIEW’
‘README’ -> ‘/usr/share/doc/openssh-7.9p1/README’
‘README.dns’ -> ‘/usr/share/doc/openssh-7.9p1/README.dns’
‘README.platform’ -> ‘/usr/share/doc/openssh-7.9p1/README.platform’
‘README.privsep’ -> ‘/usr/share/doc/openssh-7.9p1/README.privsep’
‘README.tun’ -> ‘/usr/share/doc/openssh-7.9p1/README.tun’
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]#
验证Openssh是否升级成功
[root@localhost openssh-7.9p1]# ssh -V
OpenSSH_7.9p1, OpenSSL 1.0.2q 20 Nov 2018
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]#
启用OpenSSH服务
[root@localhost openssh-7.9p1]# echo 'X11Forwarding yes' >> /etc/ssh/sshd_config
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]# echo "PermitRootLogin yes" >> /etc/ssh/sshd_config
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]# cp -p contrib/redhat/sshd.init /etc/init.d/sshd
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]# chmod +x /etc/init.d/sshd
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]# chkconfig --add sshd
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]# chkconfig sshd on
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]# chkconfig --list sshd
Note: This output shows SysV services only and does not include native
systemd services. SysV configuration data might be overridden by native
systemd configuration.
If you want to list systemd services use 'systemctl list-unit-files'.
To see services enabled on particular target use
'systemctl list-dependencies [target]'.
sshd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
[root@localhost openssh-7.9p1]#
7版本命令查看
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]# systemctl status sshd
● sshd.service - SYSV: OpenSSH server daemon
Loaded: loaded (/etc/rc.d/init.d/sshd; bad; vendor preset: enabled)
Active: inactive (dead)
Docs: man:systemd-sysv-generator(8)
Nov 27 01:04:34 localhost.localdomain sshd[11784]: Accepted password for root from 192.168.95.1 port 63419 ssh3
Nov 27 01:04:45 localhost.localdomain sshd[11793]: Accepted password for root from 192.168.95.1 port 63420 ssh3
Nov 27 01:04:49 localhost.localdomain sshd[11802]: Accepted password for root from 192.168.95.1 port 63421 ssh3
Nov 27 01:11:05 localhost.localdomain sshd[11873]: Accepted password for root from 192.168.95.1 port 63468 ssh3
Nov 27 01:13:10 localhost.localdomain sshd[11884]: Accepted password for root from 192.168.95.1 port 51001 ssh3
Nov 27 01:13:10 localhost.localdomain sshd[11886]: Accepted password for root from 192.168.95.1 port 51002 ssh3
Nov 27 01:23:00 localhost.localdomain sshd[12053]: Accepted password for root from 192.168.95.1 port 52076 ssh3
Nov 27 01:53:53 localhost.localdomain systemd[1]: Stopping OpenSSH server daemon...
Nov 27 01:53:53 localhost.localdomain sshd[1108]: Received signal 15; terminating.
Nov 27 01:53:53 localhost.localdomain systemd[1]: Stopped OpenSSH server daemon.
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]#
重启sshd服务
[root@localhost openssh-7.9p1]# systemctl restart sshd
[root@localhost openssh-7.9p1]#
[root@localhost openssh-7.9p1]# reboot
方法二：
systemctl status sshd.service
启动服务：
systemctl start sshd.service
重启服务：
systemctl restart sshd.service
开机自启：
systemctl enable sshd.service
重启操作系统生效
reboot
查看Openssh、Openssl升级情况
[root@localhost ~]#
[root@localhost ~]# ssh -V
OpenSSH_7.9p1, OpenSSL 1.0.2q 20 Nov 2018
[root@localhost ~]#
[root@localhost ~]#
卸载telnet
[root@localhost ~]# yum remove telnet* xinetd y
查看SSH启动状态
[root@localhost ~]# systemctl status sshd.service
● sshd.service - SYSV: OpenSSH server daemon
Loaded: loaded (/etc/rc.d/init.d/sshd; bad; vendor preset: enabled)
Active: active (running) since Tue 2018-11-27 02:03:23 EST; 11min ago
Docs: man:systemd-sysv-generator(8)
Process: 1009 ExecStart=/etc/rc.d/init.d/sshd start (code=exited, status=0/SUCCESS)
Main PID: 1072 (sshd)
CGroup: /system.slice/sshd.service
├─1072 /usr/sbin/sshd
├─1326 sshd: root@pts/0
├─1328 -bash
└─1360 systemctl status sshd.service
Nov 27 02:03:23 localhost.localdomain systemd[1]: Starting SYSV: OpenSSH server daemon...
Nov 27 02:03:23 localhost.localdomain sshd[1072]: Server listening on 0.0.0.0 port 22.
Nov 27 02:03:23 localhost.localdomain sshd[1072]: Server listening on :: port 22.
Nov 27 02:03:23 localhost.localdomain sshd[1009]: Starting sshd:[ OK ]
Nov 27 02:03:23 localhost.localdomain systemd[1]: Started SYSV: OpenSSH server daemon.
Nov 27 02:04:05 localhost.localdomain sshd[1326]: Accepted password for root from 192.168.95.1 port 49961 ssh3
[root@localhost ~]#
查看Bash当前版本
[root@localhost ~]# rpm -qa|grep bash
bash-4.2.46-28.el7.x86_64
[root@localhost ~]#
[root@test soft]# rpm -Uvh bash-4.2.46-29.el7_4.x86_64.rpm
warning: bash-4.2.46-29.el7_4.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
Preparing... ################################# [100%]
Updating / installing...
1:bash-4.2.46-29.el7_4 ################################# [ 50%]
Cleaning up / removing...
2:bash-4.2.46-28.el7 ################################# [100%]
[root@test soft]#
[root@test soft]#
[root@test ~]# rpm -qa|grep bash
bash-4.2.46-29.el7_4.x86_64
[root@test ~]#
系统调优
systemctl stop firewalld.service
systemctl disable firewalld.service
systemctl status firewalld.service
systemctl stop NetworkManager.service
systemctl disable NetworkManager.service
systemctl status NetworkManager.service
systemctl stop abrt-ccpp.service
systemctl disable abrt-ccpp.service
systemctl status abrt-ccpp.service
systemctl stop abrtd.service
systemctl disable abrtd.service
systemctl status abrtd.service
systemctl stop atd.service
systemctl disable atd.service
systemctl status atd.service
systemctl stop auditd.service
systemctl disable auditd.service
systemctl status auditd.service
systemctl stop autofs.service
systemctl disable autofs.service
systemctl status autofs.service
systemctl stop blk-availability.service
systemctl disable blk-availability.service
systemctl status blk-availability.service
systemctl stop certmonger.service
systemctl disable certmonger.service
systemctl status certmonger.service
systemctl stop cpus.service
systemctl disable cpus.service
systemctl status cpus.service
systemctl stop irqbalance.service
systemctl disable irqbalance.service
systemctl status irqbalance.service
systemctl stop libvirt-guests.service
systemctl disable libvirt-guests.service
systemctl status libvirt-guests.service
systemctl stop lvm2-monitor.service
systemctl disable lvm2-monitor.service
systemctl status lvm2-monitor.service
systemctl stop mdmonitor.service
systemctl disable mdmonitor.service
systemctl status mdmonitor.service
systemctl stop messagebus.service
systemctl disable messagebus.service
systemctl status messagebus.service
systemctl stop postfix.service
systemctl disable postfix.service
systemctl status postfix.service
systemctl stop rhsmcertd.service
systemctl disable rhsmcertd.service
systemctl status rhsmcertd.service
systemctl stop rpcbind.service
systemctl disable rpcbind.service
systemctl status rpcbind.service
systemctl stop rpcgssd.service
systemctl disable rpcgssd.service
systemctl status rpcgssd.service
systemctl disable cups
systemctl disable cups.path
systemctl disable cups.service
systemctl disable cups.socket
systemctl disable abrt-ccpp.service
systemctl disable abrt-oops.service
systemctl disable abrt-xorg.service
systemctl disable abrtd.service
systemctl disable cups.service
systemctl disable httpd.service
systemctl disable iscsid.service
systemctl disable iscsid.socket
systemctl disable iscsi.service
systemctl disable iscsi-shutdown.service
systemctl disable iscsiuio.service
systemctl disable iscsiuio.socket
systemctl disable libvirtd.service
systemctl disable libvirtd.socket
systemctl disable libvirt-guests.service
systemctl disable nfs-blkmap.service
systemctl disable nfs-client.target
systemctl disable nfs-config.service
systemctl disable nfs-idmapd.service
systemctl disable nfs-idmap.service
systemctl disable nfs-lock.service
systemctl disable nfslock.service
systemctl disable nfs-mountd.service
systemctl disable nfs-secure-server.service
systemctl disable nfs-secure.service
systemctl disable nfs-server.service
systemctl disable nfs.service
systemctl disable nfs.target.wants
systemctl disable nfs-utils.service
systemctl disable smartcard.target
systemctl disable smartd.service
systemctl disable vsftpd.service
systemctl disable vsftpd@.service
systemctl disable vsftpd.target
systemctl disable bluetooth.service
systemctl disable bluetooth.target
RHEL6版本调优
chkconfig sendmail off
chkconfig isdn off
chkconfig pcmcia off
chkconfig iptables off
chkconfig mdmonitor off
chkconfig rhnsdoff
chkconfig smartdoff
chkconfig cupsoff
chkconfig cups-config-daemon off
chkconfig iiim off
chkconfig httpd off
chkconfig squid off
chkconfig smb off
chkconfig ip6tables off
chkconfig gpm off
chkconfig xend off
chkconfig bluetooth off
chkconfig hidd off
chkconfig pcscd off
chkconfig iscsi off
chkconfig iscsid off
chkconfig avahi-daemon off
chkconfig tog-pegasus off
chkconfig yum-updatesd off
chkconfig irqbalance off
chkconfig mcstrans off
chkconfig NetworkManager off
chkconfig cpuspeed off
chkconfig irqbalance off
chkconfig bmc-watchdog off
关于天环境下Openssh-7.9p1升级以及系统调优就分享到这里了，希望以上内容可以对大家有一定的帮助，可以学到更多知识。如果觉得文章不错，可以把它分享出去让更多的人看到。
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。