linux下安装oracle 11g数据库的方法

发布时间：2020-08-24 09:33:44 作者：小新
来源：亿速云阅读：165

小编给大家分享一下linux下安装oracle 11g数据库的方法，希望大家阅读完这篇文章后大所收获，下面让我们一起去探讨吧！

linux下命令行安装oracle 11g数据库

1、准备：

本次安装的基本环境：vmware中安装centos6.10（虚拟机安装这里就不做介绍了）

虚拟机要求：内存推荐2G以上

需要下载Linux版本下对应的oracle安装包：

下载地址：http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html

对应的oracle版本：

linux.x64_11gR2_database_1of2.zip

linux.x64_11gR2_database_2of2.zip

课程

2、机器基础配置修改

（1）设置系统：Oracle只支持操作系统Red Hat Enterprise Linux 6，故需将/etc/redhat-release中的内容改成Red Hat

[root@Oracle ~]# vi /etc/redhat-release  
#CentOS release 6.10 (Final)
Red Hat Enterprise Linux 6

（2）机器信息关闭，selinux，防火墙的不必要的服务

[root@Oracle ~]# cat /etc/selinux/config                         //selinux关闭（disabled）
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of these two values:
#     targeted - Targeted processes are protected,
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted
[root@Oracle ~]# /etc/init.d/iptables stop                        //防火墙关闭
[root@Oracle ~]# vi /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.152.130   Oracle                          //新增行：IP 机器名（这是我的ip和主机名）

（3）修改用户的限制文件

[root@Oracle ~]# cat /etc/security/limits.conf                //在该文件内添加以下内容
oracle           soft    nproc           2047
oracle           hard    nproc           16384
oracle           soft    nofile          1024
oracle           hard    nofile          65536
oracle           soft    stack           10240

（4）修改内核参数

[root@Oracle ~]# cat /etc/sysctl.conf		//在文件中添加以下内容
net.ipv4.ip_local_port_range= 9000 65500 
fs.file-max = 6815744 
kernel.shmall = 10523004 
kernel.shmmax = 6465333657 
kernel.shmmni = 4096 
kernel.sem = 250 32000 100128 
net.core.rmem_default=262144 
net.core.wmem_default=262144 
net.core.rmem_max=4194304 
net.core.wmem_max=1048576 
fs.aio-max-nr = 1048576
[root@Oracle ~]# sysctl –p				// 执行这条语句使配置生效

（5）依赖包安装

[root@Oracle ~]# yum -y install binutils compat-libcap1 compat-libstdc++-33 compat-libstdc++-33*.i686 elfutils-libelf-devel gcc gcc-c++ glibc*.i686 glibc glibc-devel glibc-devel*.i686 ksh libgcc*.i686 libgcc libstdc++ libstdc++*.i686 libstdc++-devel libstdc++-devel*.i686 libaio libaio*.i686 libaio-devel libaio-devel*.i686 make sysstat unixODBC unixODBC*.i686 unixODBC-devel unixODBC-devel*.i686 libXp

3、建立用户、组，安装目录

（1）建立用户、组

[root@Oracle ~]# groupadd oinstall
[root@Oracle ~]# groupadd dba
[root@Oracle ~]# groupadd oper
[root@Oracle ~]# useradd -g oinstall -G dba,oper oracle
[root@Oracle ~]# echo "oracle" | passwd --stdin oracle
[root@Oracle ~]# id oracle		//查看用户所属组
uid=501(oracle) gid=501(oinstall) groups=501(oinstall),502(dba),503(oper)

（2）新建安装目录

[root@Oracle ~]# mkdir -p /var/app
[root@Oracle ~]# mkdir -p /var/app/oracle
[root@Oracle ~]# mkdir -p /var/app/oracle/product
[root@Oracle ~]# mkdir -p /var/app/oracle/product/11.2.0
[root@Oracle ~]# mkdir -p /var/app/oracle/product/11.2.0/dbhome_1
[root@Oracle ~]# mkdir -p /home/oracle/backup
[root@Oracle ~]# mkdir -p /home/oracle/oraInventory
[root@Oracle ~]# chown -R oracle:oinstall /var/app
[root@Oracle ~]# chown -R oracle:oinstall /home/oracle/backup
[root@Oracle ~]# chown -R oracle:oinstall /home/oracle/oraInventory
[root@Oracle ~]# chmod -R 775 /var/app

（3）设置并刷新环境变量

[root@Oracle ~]# cat /home/oracle/.bash_profile   //给该文件添加以下内容
umask 022
export ORACLE_BASE=/var/app
export ORACLE_HOME=$ORACLE_BASE/oracle/product/11.2.0/dbhome_1
export ORACLE_SID=ora11g
export PATH=$PATH:$HOME/bin:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/usr/lib
[root@Oracle ~]# source /home/oracle/.bash_profile		//执行该句使配置生效

4、安装Oracle

（1）拷贝Oracle安装文件到指定目录

[root@Oracle ~]# cp linux.x64_11gR2_database_*.zip /var/app/oracle/

（2）切换到oracle用户，解压安装包

[root@Oracle ~]# su - oracle
[oracle@Oracle ~]$ cd /var/app/oracle/
[oracle@Oracle oracle]$ unzip linux.x64_11gR2_database_1of2.zip
[oracle@Oracle oracle]$ unzip linux.x64_11gR2_database_2of2.zip

解压后得到database目录，其中response目录里面有三个rsp文件，用来作为静默安装时应答文件的模板。分别为：

[oracle@Oracle response]$ ls -l
total 76
-rw-rw-r-- 1 oracle oinstall 44960 Aug  8 17:10 dbca.rsp      //安装应答
-rw-rw-r-- 1 oracle oinstall 22752 Aug  8 14:23 db_install.rsp      //创建数据库应答
-rwxrwxr-x 1 oracle oinstall  5740 Feb 26  2009 netca.rsp //建立监听，本地服务名等网络设置

（5）修改配置文件，安装Oracle数据库

[oracle@Oracle database]$ cp /var/app/oracle/database/response/ /home/oracle/           //备份

（6）修改后的静默安装配置文件db_install.rsp内容如下：

[root@db response]# cat db_install.rsp | grep -v '^#' | grep -v '^$'
oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0
oracle.install.option=INSTALL_DB_SWONLY
ORACLE_HOSTNAME=db
UNIX_GROUP_NAME=oinstall
INVENTORY_LOCATION=/var/app/oracle/oraInventory
SELECTED_LANGUAGES=en,zh_CN
ORACLE_HOME=/var/app/oracle/product/11.2.0/dbhome_1
ORACLE_BASE=/var/app/oracle
oracle.install.db.InstallEdition=EE
oracle.install.db.isCustomInstall=false
oracle.install.db.customComponents=oracle.server:11.2.0.1.0,oracle.sysman.ccr:10.2.7.0.0,oracle.xdk:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,oracle.network:11.2.0.1.0,oracle.network.listener:11.2.0.1.0,oracle.rdbms:11.2.0.1.0,oracle.options:11.2.0.1.0,oracle.rdbms.partitioning:11.2.0.1.0,oracle.oraolap:11.2.0.1.0,oracle.rdbms.dm:11.2.0.1.0,oracle.rdbms.dv:11.2.0.1.0,orcle.rdbms.lbac:11.2.0.1.0,oracle.rdbms.rat:11.2.0.1.0
oracle.install.db.DBA_GROUP=dba
oracle.install.db.OPER_GROUP=oinstall
oracle.install.db.CLUSTER_NODES=
oracle.install.db.config.starterdb.type=GENERAL_PURPOSE
oracle.install.db.config.starterdb.globalDBName=ora11g
oracle.install.db.config.starterdb.SID=ora11g
oracle.install.db.config.starterdb.characterSet=AL32UTF8
oracle.install.db.config.starterdb.memoryOption=true
oracle.install.db.config.starterdb.memoryLimit=1500
oracle.install.db.config.starterdb.installExampleSchemas=false
oracle.install.db.config.starterdb.enableSecuritySettings=true
oracle.install.db.config.starterdb.password.ALL=oracle
oracle.install.db.config.starterdb.password.SYS=
oracle.install.db.config.starterdb.password.SYSTEM=
oracle.install.db.config.starterdb.password.SYSMAN=
oracle.install.db.config.starterdb.password.DBSNMP=
oracle.install.db.config.starterdb.control=DB_CONTROL
oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL=
oracle.install.db.config.starterdb.dbcontrol.enableEmailNotification=false
oracle.install.db.config.starterdb.dbcontrol.emailAddress=
oracle.install.db.config.starterdb.dbcontrol.SMTPServer=
oracle.install.db.config.starterdb.automatedBackup.enable=false
oracle.install.db.config.starterdb.automatedBackup.osuid=
oracle.install.db.config.starterdb.automatedBackup.ospwd=
oracle.install.db.config.starterdb.storageType=FILE_SYSTEM_STORAGE
oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=
oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=
oracle.install.db.config.asm.diskGroup=
oracle.install.db.config.asm.ASMSNMPPassword=
MYORACLESUPPORT_USERNAME=
MYORACLESUPPORT_PASSWORD=
SECURITY_UPDATES_VIA_MYORACLESUPPORT=
DECLINE_SECURITY_UPDATES=true
PROXY_HOST=
PROXY_PORT=
PROXY_USER=
PROXY_PWD=

（7）开始静默安装

[oracle@Oracle database]$ cd /var/app/oracle/database
[oracle@Oracle database]$ ./runInstaller -silent -responseFile  /var/app/oracle/database/response/db_install.rsp

（8）查看安装进度

[oracle@Oracle database]$ cd /var/app/oracle/oraInventory/logs
[oracle@Oracle logs]$ tail -f installActions*log

（9）当出现以下信息时

var/app/oracle/oraInventory/orainstRoot.sh
var/app/oracle/product/11.2.0/dbhome_1/root.sh
To execute the configuration scripts:
	1. Open a terminal window
	2. Log in  as "root"
	3. Run the scripts
	4. Return to this window and hit "Enter" key to continue
Successfully Setup Software.

打开新的客户端使用root身份执行以下脚本

[root@Oracle ~]# var/app/oracle/oraInventory/orainstRoot.sh
[root@Oracle ~]# var/app/oracle/product/11.2.0/dbhome_1/root.sh

（10）执行完上面的脚本后回到安装界面按下Enter继续。

5、配置Oracle监听

（1）运行监听文件

[oracle@Oracle ~]$ cd /var/app/oracle/database/response
[oracle@Oracle response]$ netca /silent /responsefile /var/app/oracle/database/response/netca.rsp

运行成功之后，在/var/app/oracle/product/11.2.0/dbhome_1/network/admin目录下会生成sqlnet.ora和listener.ora两个文件

[oracle@Oracle admin]$ ls
listener.ora  samples  shrept.lst  sqlnet.ora  tnsnames.ora

执行以下命令查看监听器是否已经在1521端口上开始工作了

[root@Oracle ~]# netstat -tlnp | grep 1521
tcp        0      0 :::1521                     :::*                        LISTEN      1792/tnslsnr

如果监听没有启动，则手动启动监听器

[oracle@Oracle ~]$ lsnrctl start

（2）配置Oracle数据库

[oracle@Oracle response]$ pwd
/var/app/oracle/database/response
[oracle@Oracle response]$ vi dbca.rsp
GDBNAME = "orcl11.us.oracle.com"     //78 行 全局数据库的名字=SID+主机域名
SID="ora11g"    //149行 SID
SYSPASSWORD = "oracle"    //190行
SYSTEMPASSWORD = "oracle"   //200行
CHARACTERSET="AL32UTF8" //415行 编码
NATIONALCHARACTERSET="UTF8" //425行 编码

（3）创建数据库

[oracle@Oracle ~]$  $ORACLE_HOME/bin/dbca -silent -responseFile  /var/app/oracle/database/response/dbca.rsp

6、启动数据库

进入Oracle SQL命令行

[oracle@Oracle ~]$ sqlplus / as sysdba
SQL> startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/var/app/oracle/product/11.2.0/dbhome_1/dbs/initora11g.ora'

启动时会出现以上错误，解决方法如下：找到init.ora.78201817526文件，将其复制到/var/app/oracle/product/11.2.0/dbhome_1/dbs目录下

[oracle@Oracle admin]$ locate init.ora           //定位寻找目标文件
/var/app/admin/orcl11g/pfile/init.ora.78201817526               //目标文件
/var/app/oracle/product/11.2.0/dbhome_1/dbs/init.ora
/var/app/oracle/product/11.2.0/dbhome_1/srvm/admin/init.ora
[oracle@Oracle admin]$ cd /var/app/admin/orcl11g/pfile/
[oracle@Oracle pfile]$ ls
init.ora.78201817526
[oracle@Oracle pfile]$ cp init.ora.78201817526  /var/app/oracle/product/11.2.0/dbhome_1/dbs/
[oracle@Oracle dbs]$ mv init.ora.78201817526 initora11g.ora    //将目标文件改成所需文件名

进入到Oracle SQL命令行中，执行startup

[oracle@Oracle ~]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Fri Aug 10 01:59:43 2018
Copyright (c) 1982, 2009, Oracle.  All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> startup                                         //启动数据库实例
ORACLE instance started.
Total System Global Area  839282688 bytes
Fixed Size                  2217992 bytes
Variable Size             494929912 bytes
Database Buffers          339738624 bytes
Redo Buffers                2396160 bytes
Database mounted.
Database opened.

看完了这篇文章，相信你对linux下安装oracle 11g数据库的方法有了一定的了解，想了解更多相关知识，欢迎关注亿速云行业资讯频道，感谢各位的阅读！