您好,登录后才能下订单哦!
最近在AIO 6.1与SF环境中遇到了AIO的问题,下面是MOS中关于AIO 在6.1下的一般变化说明
欢迎大家加入ORACLE超级群:17115662 免费解决各种ORACLE问题,以后BLOG将迁移到http://www.htz.pw
AIO on AIX 6.1 (文档 ID 1328019.1)
修改时间:2014-5-6
类型:HOWTO
In this Document
Goal
Fix
AIO on AIX 6.1 (文档 ID 1328019.1)
修改时间:2014-5-6
类型:HOWTO
In this Document
Goal
Fix
References
APPLIES TO:
Oracle Server - Enterprise Edition - Version 10.2.0.4 to 11.2.0.2.0 [Release 10.2 to 11.2]
IBM AIX on POWER Systems (64-bit)
GOAL
Enabling or checking AIO on AIX 6.1 Operating System.
FIX
Customers do not need to enable AIO subsystem on AIX 6.1 as it's a default option. AIO subsystems are handled thru AIX kernel extensions and they are loaded by default. They are also automatically started when an application initiates an AIO requests.
Two new parameters (aio_active and posix_aio_active; ioo -a | grep aio) have been added on AIX 6.1, but they can only be changed by AIX. The value is set to 1 only when AIX kernel extensions are used and pinned.
So, the bottom line is that you don't need to do any checking on AIX 6.1. Another way of checking if AIO subsystems are loaded is to verify whether kernel extensions are loaded or not. You can do that by doing "genkex | grep aio".
As an example - the following command may show:
/usr/sbin/ioo -a | grep aio
aio_active = 1
aio_maxreqs = 8192
aio_maxservers = 40
aio_minservers = 20
aio_server_inactivity = 300
posix_aio_active = 1
posix_aio_maxreqs = 65536
posix_aio_maxservers = 30
posix_aio_minservers = 3
posix_aio_server_inactivity = 300
NOTE: Please note that Oracle is not recommending changes to these parameters as they are dynamically tuned by AIX 6.1 and values of these parameters get changed according to the server utilization. AIX will adjust them accordingly.
References
APPLIES TO:
Oracle Server - Enterprise Edition - Version 10.2.0.4 to 11.2.0.2.0 [Release 10.2 to 11.2]
IBM AIX on POWER Systems (64-bit)
GOAL
Enabling or checking AIO on AIX 6.1 Operating System.
FIX
Customers do not need to enable AIO subsystem on AIX 6.1 as it's a default option. AIO subsystems are handled thru AIX kernel extensions and they are loaded by default. They are also automatically started when an application initiates an AIO requests.
Two new parameters (aio_active and posix_aio_active; ioo -a | grep aio) have been added on AIX 6.1, but they can only be changed by AIX. The value is set to 1 only when AIX kernel extensions are used and pinned.
So, the bottom line is that you don't need to do any checking on AIX 6.1. Another way of checking if AIO subsystems are loaded is to verify whether kernel extensions are loaded or not. You can do that by doing "genkex | grep aio".
As an example - the following command may show:
/usr/sbin/ioo -a | grep aio
aio_active = 1
aio_maxreqs = 8192
aio_maxservers = 40
aio_minservers = 20
aio_server_inactivity = 300
posix_aio_active = 1
posix_aio_maxreqs = 65536
posix_aio_maxservers = 30
posix_aio_minservers = 3
posix_aio_server_inactivity = 300
NOTE: Please note that Oracle is not recommending changes to these parameters as they are dynamically tuned by AIX 6.1 and values of these parameters get changed according to the server utilization. AIX will adjust them accordingly.
免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。