怎么用vbs实现修改dns的网关

这篇文章主要讲解了“怎么用vbs实现修改dns的网关”，文中的讲解内容简单清晰，易于学习与理解，下面请大家跟着小编的思路慢慢深入，一起来研究和学习“怎么用vbs实现修改dns的网关”吧！

复制代码 代码如下:

Const T_GATEWAY = "1.1.1.1" '网关
Const T_NEWDNS1 = "2.2.2.2" 'DNS1
Const T_NEWDNS2 = "3.3.3.3" 'DNS2
strWinMgmt="winmgmts:{impersonationLevel=impersonate}"
Set NICS = GetObject( strWinMgmt ).InstancesOf("Win32_NetworkAdapterConfiguration")
For Each NIC In NICS
If NIC.IPEnabled Then
NIC.SetDNSServerSearchOrder Array(T_NEWDNS1,T_NEWDNS2)
NIC.SetGateways Array(T_GATEWAY)
End If
Next

 

无须重新启动,不管系统语言

VBS改DNS（未测试）：

复制代码 代码如下:

On Error Resume Next
temp=0
set wshshell=wscript.createobject("wscript.shell")
'启动WMI服务
wshshell.run ("%comspec% /c regsvr32 /s scrrun.dll"),0,True
wshshell.run ("%comspec% /c sc config winmgmt start= auto"),0,True
wshshell.run ("%comspec% /c net start winmgmt"),0
wshshell.run ("%comspec% /c sc config NetMan start= auto"),0,True
wshshell.run ("%comspec% /c net start NetMan"),0

strComputer = "."
Set objWMIService = Getobject("winmgmts:\" & strComputer & "\root\cimv2")

'得到当前活动网卡ID
Set colItems = objWMIService.ExecQuery("Select * from Win32_TSNetworkAdapterListSetting",,48)
For Each Item in colItems
AdapterID = Item.NetworkAdapterID
Next

'禁NETBIOS
Set reg = WScript.CreateObject("WScript.Shell")
reg.RegWrite "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_"&AdapterID&"\NetbiosOptions","2","REG_DWORD"

'更改DNS
Set reg = WScript.CreateObject("WScript.Shell")
reg.RegWrite "HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Tcpip\Parameters\Interfaces"&AdapterID&"\NameServer","202.96.128.68,202.96.128.143,202.96.128.166,202.96.128.86","REG_SZ"

'禁NETMAN服务
Set reg = WScript.CreateObject("WScript.Shell")
reg.RegWrite "HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Netman\Start","4","REG_DWORD"

msgbox "更改完成,请重启网卡!"

感谢各位的阅读，以上就是“怎么用vbs实现修改dns的网关”的内容了，经过本文的学习后，相信大家对怎么用vbs实现修改dns的网关这一问题有了更深刻的体会，具体使用情况还需要大家实践验证。这里是亿速云，小编将为大家推送更多相关知识点的文章，欢迎关注！