您好，登录后才能下订单哦！
密码登录
登录注册
点击 登录注册 即表示同意《亿速云用户服务条款》
本篇内容主要讲解“如何在TurboLinux11中添加新硬盘”，感兴趣的朋友不妨来看看。本文介绍的方法操作简单快捷，实用性强。下面就让小编来带大家学习“如何在TurboLinux11中添加新硬盘”吧!
2.6 kernel以后,linux会将识别到的硬件设备,在/dev/下建立相应的设备文件.如:
sda 表示第1块SCSI硬盘. hda 表示第1块IDE硬盘(即连接在第1个IDE接口的Master口上). scd0 表示第1个USB光驱.
当添加了新硬盘后,在/dev目录下会有相应的设备文件产生.cciss的硬盘是个例外,它的
设备文件在/dev/cciss/目录下.一般使用”fdisk -l”命令可以列出系统中当前连接的硬盘
设备和分区信息.新硬盘没有分区信息,则只显示硬盘大小信息.
下面说明一下,在GTES 11上,添加一块10G硬盘到第一个IDE口的Slave接口上.
安装好硬盘后,开机进入Turbolinux.以root身份登录.
执行fdisk -l命令显示当前系统的硬盘设备.
[root@g11-64-1 ~]# fdisk -l Disk /dev/hda: 21.4 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 13 104391 83 Linux /dev/hda2 14 89 610470 82 Linux swap / Solaris /dev/hda3 90 2610 20249932+ 83 Linux Disk /dev/hdb: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk /dev/hdb doesn't contain a valid partition table [root@g11-64-1 ~]#
显示hdb没有分区信息,大小为10G.
使用fdisk命令对hdb进行分区.
[root@g11-64-1 ~]# fdisk /dev/hdb Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. The number of cylinders for this disk is set to 1305. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) 输入: n 表示新建分区. Command (m for help): n Command action e extended p primary partition (1-4) 输入: p 表示建立一个原始分区. p Partition number (1-4): 1 输入: 1 表示此分区编号为1. First cylinder (1-1305, default 1): 输入: 回车 表示使用默认起始柱面号. Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-1305, default 1305): 输入: 回车 表示使用默认结束柱面号.即此分区使用整个硬盘空间. Using default value 1305 Command (m for help): w 输入: w 存盘,退出fdisk. The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks.
再使用fdisk -l命令查看分区情况.
[root@g11-64-1 ~]# fdisk -l Disk /dev/hda: 21.4 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 13 104391 83 Linux /dev/hda2 14 89 610470 82 Linux swap / Solaris /dev/hda3 90 2610 20249932+ 83 Linux Disk /dev/hdb: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 1305 10482381 83 Linux
显示/dev/hdb上有一个hdb1分区,为linux格式.
分区后,需要对这个分区进行格式化.
[root@g11-64-1 ~]# mkfs.ext3 /dev/hdb1 mke2fs 1.39 (29-May-2006) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 1310720 inodes, 2620595 blocks 131029 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=2684354560 80 block groups 32768 blocks per group, 32768 fragments per group 16384 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 39 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.
将新建分区挂在到/mnt/hdb1上.
[root@g11-64-1 ~]# mkdir /mnt/hdb1 [root@g11-64-1 ~]# mount /dev/hdb1 /mnt/hdb1 [root@g11-64-1 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/hda3 19G 8.2G 9.7G 46% / /dev/hda1 99M 16M 79M 17% /boot tmpfs 250M 0 250M 0% /dev/shm /dev/hdb1 9.9G 151M 9.2G 2% /mnt/hdb1 [root@g11-64-1 ~]#
hdb1已挂载到/mnt/hdb1上,剩余空间为9.2G.
在此分区上创建文件.
[root@g11-64-1 ~]# cd /mnt/hdb1 [root@g11-64-1 hdb1]# ls > a [root@g11-64-1 hdb1]# ls -hl total 20K -rw-r--r-- 1 root root 13 Nov 3 08:45 a drwx------ 2 root root 16K Nov 3 08:44 lost+found [root@g11-64-1 hdb1]#
卸载hdb1分区.
[root@g11-64-1 hdb1]# cd [root@g11-64-1 ~]# umount /mnt/hdb1 [root@g11-64-1 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/hda3 19G 8.2G 9.7G 46% / /dev/hda1 99M 16M 79M 17% /boot tmpfs 250M 0 250M 0% /dev/shm [root@g11-64-1 ~]#
在/etc/fstab中添加新硬盘的挂载信息.添加下面一行:
/dev/hdb1 /mnt/hdb1 ext3 defaults 1 2
这样,每次开机后,系统会自动将/dev/hdb1挂载到/mnt/hdb1上.
undefined
到此，相信大家对“如何在TurboLinux11中添加新硬盘”有了更深的了解，不妨来实际操作一番吧！这里是亿速云网站，更多相关内容可以进入相关频道进行查询，关注我们，继续学习！
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。