Banana Pi如何编译Bootup u-boot

今天给大家介绍一下Banana Pi如何编译Bootup u-boot。文章的内容小编觉得不错，现在给大家分享一下，觉得有需要的朋友可以了解一下，希望对大家有所帮助，下面跟着小编的思路一起来阅读吧。

1. compile　u-boot
$ git clone git://github.com/linux-sunxi/u-boot-sunxi.git
$ make Cubieboard2_config
$ make
2. burn u-boot
$ dd if=/dev/zero of=/dev/sdb bs=1M count=1
$ dd if=u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8
3. start u-boot

--->8---
U-Boot SPL 2014.04-rc2-10390-g96510e1 (Apr 04 2014 - 21:11:38)
Board: Cubieboard2
DRAM: 1024 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
spl: not an uImage at 1600


U-Boot 2014.04-rc2-10390-g96510e1 (Apr 04 2014 - 21:11:38) Allwinner Technology

CPU: Allwinner A20 (SUN7I)
Board: Cubieboard2
I2C: ready
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Net: Phy not found
dwmac.1c50000
Warning: failed to set MAC address

Hit any key to stop autoboot: 0

以上就是Banana Pi如何编译Bootup u-boot的全部内容了，更多与Banana Pi如何编译Bootup u-boot相关的内容可以搜索亿速云之前的文章或者浏览下面的文章进行学习哈！相信小编会给大家增添更多知识,希望大家能够支持一下亿速云！