Juniper ScreenOS防火墙查看某个IP或某个Port

发布时间:2020-03-31 19:19:27 作者:msft
来源:网络 阅读:1523

Juniper ScreenOS防火墙查看某个IP或某个Port或某个

ScreenOS版本:


ISG2000-> get system | in "Software Version"

Software Version: 5.4.0r6.0, Type: Firewall+×××


IP/Port/Mac又可细分为源IP、目的IP、源Port、目的Port、源Mac和目的Mac,命令如下:


ISG2000-> get session ?

> redirect output

| match output

<return>

dst-ip destination ip address

dst-mac destination mac address

dst-port destination port number or range

hardware show hardware sessions only

id show sessions with id

ike-nat show ike-nat ALG info

protocol protocol number or range

rm show sessions for resource management

service show sessions with service type

src-ip source ip address

src-mac source mac address

src-port source port number or range

tunnel show tunnel sessions

vsd-id get vsd-id specified sessions


下面是查看源IP为10.244.148.231的所有会话总数:


ISG2000-> get session src-ip 10.244.148.231

alloc 39986/max 524288, alloc failed 241404, mcast alloc 0, di alloc failed 0

total reserved 0, free sessions in shared pool 484302

slot 2: hw0 alloc 39884/max 1048575 

Total 29340 sessions according filtering criteria.

id 138/s0*,vsys 0,flag 04200400/0000/0003,policy 5,time 2202, dip 0 module 0

if 23(nspflag 800801):10.244.148.231/44295->10.243.211.40/161,17,00005e00010a,sess token 24,vlan 0,tun 0,vsd 0,route 35

if 64(nspflag 800800):10.244.150.49/44295<-10.243.211.40/161,17,00005e000133,sess token 6,vlan 0,tun 0,vsd 0,route 21


下面是查看目的Port为161的所有会话总数:


ISG2000-> get session dst-port 161

alloc 40045/max 524288, alloc failed 241404, mcast alloc 0, di alloc failed 0

total reserved 0, free sessions in shared pool 484243

slot 2: hw0 alloc 39942/max 1048575 

Total 38375 sessions according filtering criteria.

id 138/s0*,vsys 0,flag 04200400/0000/0003,policy 5,time 2201, dip 0 module 0

if 23(nspflag 800801):10.244.148.231/44295->10.243.211.40/161,17,00005e00010a,sess token 24,vlan 0,tun 0,vsd 0,route 35

if 64(nspflag 800800):10.244.150.49/44295<-10.243.211.40/161,17,00005e000133,sess token 6,vlan 0,tun 0,vsd 0,route 21


下面是查看目的Mac为00005e00010a的所有会话总数:


ISG2000-> get session src-mac 00005e00010a

alloc 39913/max 524288, alloc failed 241404, mcast alloc 0, di alloc failed 0

total reserved 0, free sessions in shared pool 484375

slot 2: hw0 alloc 39838/max 1048575 

Total 39015 sessions according filtering criteria.

id 138/s0*,vsys 0,flag 04200400/0000/0003,policy 5,time 2142, dip 0 module 0

if 23(nspflag 800801):10.244.148.231/44295->10.243.211.40/161,17,00005e00010a,sess token 24,vlan 0,tun 0,vsd 0,route 35

if 64(nspflag 800800):10.244.150.49/44295<-10.243.211.40/161,17,00005e000133,sess token 6,vlan 0,tun 0,vsd 0,route 21


Juniper ScreenOS防火墙清除某个IP或某个Port或某个Mac会话数的方法就是把get关键字换成clear。


推荐阅读:
  1. Juniper SRX防火墙HA配置
  2. Juniper防火墙设备产生告警灯原因及清楚告警灯

免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。

juniper screen 火墙

上一篇:C# 任务调度器之FluentScheduler

下一篇:iOS开发那些-如何打包iOS应用程序

相关阅读

您好,登录后才能下订单哦!

密码登录
登录注册
其他方式登录
点击 登录注册 即表示同意《亿速云用户服务条款》