您好，登录后才能下订单哦！
密码登录
登录注册
点击 登录注册 即表示同意《亿速云用户服务条款》
这篇文章主要讲解了“Ceph怎么添加删除监视器”，文中的讲解内容简单清晰，易于学习与理解，下面请大家跟着小编的思路慢慢深入，一起来研究和学习“Ceph怎么添加删除监视器”吧！
已有三节点ceph集群，有3个mon，现在再添加一个mon
# ceph -s
cluster 520d715f-adb5-4a6a-afb2-dcf586308166
health HEALTH_OK
monmap e3: 3 mons at {hadoop001=10.10.1.32:6789/0,hadoop002=10.10.1.33:6789/0,hadoop003=10.10.1.34:6789/0}
election epoch 1850, quorum 0,1,2hadoop001,hadoop002,hadoop003
osdmap e127: 4 osds: 4 up, 4 in
flags sortbitwise
pgmap v22405: 64 pgs, 1 pools, 0 bytes data, 0 objects
145 MB used, 334 GB / 334 GB avail
64 active+clean要添加新的mon节点，那新节点的系统环境也需要配置与原有环境一致，这里只简单列下需要配置的列表，不多做赘述：
主机名、/etc/hosts、ssh互信、防火墙、时间同步、Selinux、最大进程数、文件句柄数、最大线程数、ceph的yum源
系统环境配置好后，在新增的mon节点上安装ceph软件
# yum install ceph
在原有mon节点上使用ceph-deploy直接创建新的mon
注意：配置文件中需要配置public_network,否则可能会添加失败
# ceph-deploy mon create hadoop004
[ceph_deploy.conf][DEBUG ] found configuration file at: /root/.cephdeploy.conf
[ceph_deploy.cli][INFO ] Invoked (1.5.34): /usr/bin/ceph-deploy mon create hadoop004
[ceph_deploy.cli][INFO ] ceph-deploy options:
[ceph_deploy.cli][INFO ] username : None
[ceph_deploy.cli][INFO ] verbose : False
[ceph_deploy.cli][INFO ] overwrite_conf : False
[ceph_deploy.cli][INFO ] subcommand : create
[ceph_deploy.cli][INFO ] quiet : False
[ceph_deploy.cli][INFO ] cd_conf : <ceph_deploy.conf.cephdeploy.Conf instance at 0x2872cb0>
[ceph_deploy.cli][INFO ] cluster : ceph
[ceph_deploy.cli][INFO ] mon : ['hadoop004']
[ceph_deploy.cli][INFO ] func : <function mon at 0x27ff758>
[ceph_deploy.cli][INFO ] ceph_conf : None
[ceph_deploy.cli][INFO ] default_release : False
[ceph_deploy.cli][INFO ] keyrings : None
[ceph_deploy.mon][DEBUG ] Deploying mon, cluster ceph hosts hadoop004
[ceph_deploy.mon][DEBUG ] detecting platform for host hadoop004 ...
[hadoop004][DEBUG ] connected to host: hadoop004
[hadoop004][DEBUG ] detect platform information from remote host
[hadoop004][DEBUG ] detect machine type
[hadoop004][DEBUG ] find the location of an executable
[ceph_deploy.mon][INFO ] distro info: CentOS Linux 7.2.1511 Core
[hadoop004][DEBUG ] determining if provided host has same hostname in remote
[hadoop004][DEBUG ] get remote short hostname
[hadoop004][DEBUG ] deploying mon to hadoop004
[hadoop004][DEBUG ] get remote short hostname
[hadoop004][DEBUG ] remote hostname: hadoop004
[hadoop004][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[hadoop004][DEBUG ] create the mon path if it does not exist
[hadoop004][DEBUG ] checking for done path: /var/lib/ceph/mon/ceph-hadoop004/done
[hadoop004][DEBUG ] done path does not exist: /var/lib/ceph/mon/ceph-hadoop004/done
[hadoop004][INFO ] creating keyring file: /var/lib/ceph/tmp/ceph-hadoop004.mon.keyring
[hadoop004][DEBUG ] create the monitor keyring file
[hadoop004][INFO ] Running command: ceph-mon --cluster ceph --mkfs -i hadoop004 --keyring /var/lib/ceph/tmp/ceph-hadoop004.mon.keyring --setuser 167 --setgroup 167
[hadoop004][DEBUG ] ceph-mon: renaming mon.noname-d 10.10.1.36:6789/0 to mon.hadoop004
[hadoop004][DEBUG ] ceph-mon: set fsid to 520d715f-adb5-4a6a-afb2-dcf586308166
[hadoop004][DEBUG ] ceph-mon: created monfs at /var/lib/ceph/mon/ceph-hadoop004 for mon.hadoop004
[hadoop004][INFO ] unlinking keyring file /var/lib/ceph/tmp/ceph-hadoop004.mon.keyring
[hadoop004][DEBUG ] create a done file to avoid re-doing the mon deployment
[hadoop004][DEBUG ] create the init path if it does not exist
[hadoop004][INFO ] Running command: systemctl enable ceph.target
[hadoop004][INFO ] Running command: systemctl enable ceph-mon@hadoop004
[hadoop004][INFO ] Running command: systemctl start ceph-mon@hadoop004
[hadoop004][INFO ] Running command: ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.hadoop004.asok mon_status
[hadoop004][DEBUG ] ********************************************************************************
[hadoop004][DEBUG ] status for monitor: mon.hadoop004
[hadoop004][DEBUG ] {
[hadoop004][DEBUG ] "election_epoch": 0,
[hadoop004][DEBUG ] "extra_probe_peers": [
[hadoop004][DEBUG ] "10.10.1.32:6789/0",
[hadoop004][DEBUG ] "10.10.1.33:6789/0",
[hadoop004][DEBUG ] "10.10.1.34:6789/0"
[hadoop004][DEBUG ] ],
[hadoop004][DEBUG ] "monmap": {
[hadoop004][DEBUG ] "created": "2016-12-19 09:59:12.970500",
[hadoop004][DEBUG ] "epoch": 3,
[hadoop004][DEBUG ] "fsid": "520d715f-adb5-4a6a-afb2-dcf586308166",
[hadoop004][DEBUG ] "modified": "2017-08-02 17:22:40.247484",
[hadoop004][DEBUG ] "mons": [
[hadoop004][DEBUG ] {
[hadoop004][DEBUG ] "addr": "10.10.1.32:6789/0",
[hadoop004][DEBUG ] "name": "hadoop001",
[hadoop004][DEBUG ] "rank": 0
[hadoop004][DEBUG ] },
[hadoop004][DEBUG ] {
[hadoop004][DEBUG ] "addr": "10.10.1.33:6789/0",
[hadoop004][DEBUG ] "name": "hadoop002",
[hadoop004][DEBUG ] "rank": 1
[hadoop004][DEBUG ] },
[hadoop004][DEBUG ] {
[hadoop004][DEBUG ] "addr": "10.10.1.34:6789/0",
[hadoop004][DEBUG ] "name": "hadoop003",
[hadoop004][DEBUG ] "rank": 2
[hadoop004][DEBUG ] }
[hadoop004][DEBUG ] ]
[hadoop004][DEBUG ] },
[hadoop004][DEBUG ] "name": "hadoop004",
[hadoop004][DEBUG ] "outside_quorum": [],
[hadoop004][DEBUG ] "quorum": [],
[hadoop004][DEBUG ] "rank": -1,
[hadoop004][DEBUG ] "state": "probing",
[hadoop004][DEBUG ] "sync_provider": []
[hadoop004][DEBUG ] }
[hadoop004][DEBUG ] ********************************************************************************
[hadoop004][INFO ] monitor: mon.hadoop004 is currently at the state of probing
[hadoop004][INFO ] Running command: ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.hadoop004.asok mon_status
[hadoop004][WARNIN] monitor hadoop004 does not exist in monmap查看状态，添加成功。
# ceph -s
cluster 520d715f-adb5-4a6a-afb2-dcf586308166
health HEALTH_OK
monmap e4: 4 mons at {hadoop001=10.10.1.32:6789/0,hadoop002=10.10.1.33:6789/0,hadoop003=10.10.1.34:6789/0,hadoop004=10.10.1.36:6789/0}
election epoch 1850, quorum 0,1,2,3 hadoop001,hadoop002,hadoop003,hadoop004
osdmap e127: 4 osds: 4 up, 4 in
flags sortbitwise
pgmap v22405: 64 pgs, 1 pools, 0 bytes data, 0 objects
145 MB used, 334 GB / 334 GB avail
64 active+clean添加完成后在ceph.conf中的mon_initial_members和mon_host参数中分别添加新mon节点的hostname和ip地址
# ceph-deploy mon destroy hadoop004 [ceph_deploy.conf][DEBUG ] found configuration file at: /root/.cephdeploy.conf [ceph_deploy.cli][INFO ] Invoked (1.5.34): /usr/bin/ceph-deploy mon destroy hadoop004 [ceph_deploy.cli][INFO ] ceph-deploy options: [ceph_deploy.cli][INFO ] username : None [ceph_deploy.cli][INFO ] verbose : False [ceph_deploy.cli][INFO ] overwrite_conf : False [ceph_deploy.cli][INFO ] subcommand : destroy [ceph_deploy.cli][INFO ] quiet : False [ceph_deploy.cli][INFO ] cd_conf : <ceph_deploy.conf.cephdeploy.Conf instance at 0x19f1cb0> [ceph_deploy.cli][INFO ] cluster : ceph [ceph_deploy.cli][INFO ] mon : ['hadoop004'] [ceph_deploy.cli][INFO ] func : <function mon at 0x197e758> [ceph_deploy.cli][INFO ] ceph_conf : None [ceph_deploy.cli][INFO ] default_release : False [ceph_deploy.mon][DEBUG ] Removing mon from hadoop004 [hadoop004][DEBUG ] connected to host: hadoop004 [hadoop004][DEBUG ] detect platform information from remote host [hadoop004][DEBUG ] detect machine type [hadoop004][DEBUG ] find the location of an executable [hadoop004][DEBUG ] get remote short hostname [hadoop004][INFO ] Running command: ceph --cluster=ceph -n mon. -k /var/lib/ceph/mon/ceph-hadoop004/keyring mon remove hadoop004 [hadoop004][WARNIN] Error EINVAL: removing mon.hadoop004 at 10.10.1.36:6789/0, there will be 3 monitors [hadoop004][INFO ] polling the daemon to verify it stopped [hadoop004][INFO ] Running command: systemctl stop ceph-mon@hadoop004.service [hadoop004][INFO ] Running command: mkdir -p /var/lib/ceph/mon-removed [hadoop004][DEBUG ] move old monitor data
彻底清理,操作需慎重：
注意：这个会删除mon节点hadoop004上所有的ceph数据，配置文件以及rpm包
# ceph-deploy purge hadoop004
如果觉得删除的不干净，可以再去hadoop004上删除遗留目录
# rm -rf /var/lib/ceph # rm -rf /var/run/ceph/*
上一章中已经将hadoop004的mon清理干净了。
hadoop004 上安装软件，创建mon目录
[root@hadoop004 ~]# yum install ceph
hadoop001上将ceph.conf和客户端密钥拷贝到hadoop004的/etc/ceph目录
# scp ceph.conf ceph.client.admin.keyring hadoop004:/etc/ceph/
hadoop004上： 获取mon密钥环
# mkdir dlw # cd dlw/ # ceph auth get mon. -o keying exported keyring for mon.
获取监视器运行图
# ceph mon getmap -o monmap got monmap epoch 5
创建监视器数据目录
# ceph-mon -i hadoop004 --mkfs --monmap monmap --keyring keying ceph-mon: set fsid to 520d715f-adb5-4a6a-afb2-dcf586308166 ceph-mon: created monfs at /var/lib/ceph/mon/ceph-hadoop004 for mon.hadoop004
启动新监视器
# ceph-mon -i hadoop004 --public-addr 10.10.1.36:6789
检查状态
# ceph -s
cluster 520d715f-adb5-4a6a-afb2-dcf586308166
health HEALTH_OK
monmap e6: 4 mons at {hadoop001=10.10.1.32:6789/0,hadoop002=10.10.1.33:6789/0,hadoop003=10.10.1.34:6789/0,hadoop004=10.10.1.36:6789/0}
election epoch 1854, quorum 0,1,2,3 hadoop001,hadoop002,hadoop003,hadoop004
osdmap e127: 4 osds: 4 up, 4 in
flags sortbitwise
pgmap v22405: 64 pgs, 1 pools, 0 bytes data, 0 objects
145 MB used, 334 GB / 334 GB avail
64 active+clean发现集群已经成功四个mon了，但是到这里并没有完，ceph强在自我修复能力很强，总不能每次启动新的mon都要自己手动执行ceph-mon。
添加ceph-mon@hadoop004服务
先找到刚刚启动的mon进程，终止掉。
# ps -ef |grep ceph root 30514 1 0 18:25 pts/1 00:00:00 ceph-mon -i hadoop004 --public-addr 10.10.1.36:6789 root 30899 9739 0 18:30 pts/1 00:00:00 grep --color=auto ceph # kill 30514
在ceph.conf中的mon_initial_members和mon_host参数中分别添加新mon节点的hostname和ip地址
启动服务之前，需要修改mon数据目录的权限为ceph
# cd /var/lib/ceph/mon # chown -R ceph:ceph ceph-hadoop004/
启动mon服务
# systemctl reset-failed ceph-mon@hadoop004.service # systemctl restart ceph-mon@`hostname` # systemctl enable ceph-mon@`hostname` # systemctl restart ceph-mon.target # systemctl status ceph-mon@`hostname` ● ceph-mon@hadoop004.service - Ceph cluster monitor daemon Loaded: loaded (/usr/lib/systemd/system/ceph-mon@.service; enabled; vendor preset: disabled) Active: active (running) since 三 2017-08-02 18:37:36 CHOST; 3s ago Main PID: 31115 (ceph-mon) CGroup: /system.slice/system-ceph\x2dmon.slice/ceph-mon@hadoop004.service └─31115 /usr/bin/ceph-mon -f --cluster ceph --id hadoop004 --setuser ceph --setgroup ceph 8月 02 18:37:36 hadoop004 systemd[1]: Started Ceph cluster monitor daemon. 8月 02 18:37:36 hadoop004 systemd[1]: Starting Ceph cluster monitor daemon... 8月 02 18:37:36 hadoop004 ceph-mon[31115]: starting mon.hadoop004 rank 3 at 10.10.1.36:6789/0 mon_data /var/lib/ceph/mon/ceph-hadoop004 fsid 520d715f-adb5-4a6a-afb2-dcf586308166
# ceph mon remove hadoop004 Error EINVAL: removing mon.hadoop004 at 10.10.1.36:6789/0, there will be 3 monitors
清理数据目录，卸载软件包
# rm -rf /var/lib/ceph # rm -rf /var/run/ceph/* # yum remove ceph
查看集群mon的选取情况 # ceph quorum_status -f json-pretty 获取monmap # ceph-mon -i `hostname` --inject-monmap /opt/monmap 查看monmap # monmaptool --print /opt/monmap 在monmap中添加mon # monmaptool --add hadoop004 10.10.1.36:6789 在monmap中删除mon # monmaptool /tmp/monmap --rm hadoop004 注入monmap，注入之前要停止所有的mon # systemctl stop ceph-mon@`hostname` # ceph-mon -i `hostname` --inject-monmap /opt/monmap
感谢各位的阅读，以上就是“Ceph怎么添加删除监视器”的内容了，经过本文的学习后，相信大家对Ceph怎么添加删除监视器这一问题有了更深刻的体会，具体使用情况还需要大家实践验证。这里是亿速云，小编将为大家推送更多相关知识点的文章，欢迎关注！
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。