您好，登录后才能下订单哦！
密码登录
登录注册
点击 登录注册 即表示同意《亿速云用户服务条款》
这篇文章给大家分享的是有关Ceph 出现pg object unfound怎么办的内容。小编觉得挺实用的，因此分享给大家做个参考，一起跟随小编过来看看吧。
集群中的一个节点损坏，同时另外一个节点坏了一块盘
查看ceph集群的状态，看到归置组pg 4.210丢了一个块
# ceph health detail HEALTH_WARN 481/5647596 objects misplaced (0.009%); 1/1882532 objects unfound (0.000%); Degraded data redundancy: 965/5647596 objects degraded (0.017%), 1 pg degraded, 1 pg undersized OBJECT_MISPLACED 481/5647596 objects misplaced (0.009%) OBJECT_UNFOUND 1/1882532 objects unfound (0.000%) pg 4.210 has 1 unfound objects PG_DEGRADED Degraded data redundancy: 965/5647596 objects degraded (0.017%), 1 pg degraded, 1 pg undersized pg 4.210 is stuck undersized for 38159.843116, current state active+recovery_wait+undersized+degraded+remapped, last acting [2]
查看pg 4.210，可以看到它现在只有一个副本
# ceph pg dump_json pools |grep 4.210 dumped all 4.210 482 1 965 481 1 2013720576 3461 3461 active+recovery_wait+undersized+degraded+remapped 2019-07-10 09:34:53.693724 9027'1835435 9027:1937140 [6,17,20] 6 [2] 2 6368'1830618 2019-07-07 01:36:16.289885 6368'1830618 2019-07-07 01:36:16.289885 2 # ceph pg map 4.210 osdmap e9181 pg 4.210 (4.210) -> up [26,20,2] acting [2] 丢了两个副本，而且最主要的是主副本也丢了…
因为默认指定的pool的min_size为2，这就导致4.210所在的池vms不能正常使用
# ceph osd pool stats vms pool vms id 4 965/1478433 objects degraded (0.065%) 481/1478433 objects misplaced (0.033%) 1/492811 objects unfound (0.000%) client io 680 B/s rd, 399 kB/s wr, 0 op/s rd, 25 op/s wr
# ceph osd pool ls detail|grep vms pool 4 'vms' replicated size 3 min_size 2 crush_rule 0 object_hash rjenkins pg_num 1024 pgp_num 1024 last_change 10312 lfor 0/874 flags hashpspool stripe_width 0 application rbd
直接影响了部分虚拟机，导致部分虚拟机夯住了，执行命令无回应
为了可以正常使用，先见vms池的min_size调整为1
# ceph osd pool set vms min_size 1 set pool 4 min_size to 1
查看pg4.210
# ceph pg 4.210 query
"recovery_state": [
{
"name": "Started/Primary/Active",
"enter_time": "2019-07-09 23:04:31.718033",
"might_have_unfound": [
{
"osd": "4",
"status": "already probed"
},
{
"osd": "6",
"status": "already probed"
},
{
"osd": "15",
"status": "already probed"
},
{
"osd": "17",
"status": "already probed"
},
{
"osd": "20",
"status": "already probed"
},
{
"osd": "22",
"status": "osd is down"
},
{
"osd": "23",
"status": "already probed"
},
{
"osd": "26",
"status": "osd is down"
}
]字面上理解，pg 4.210的自我恢复状态，它已经探查了osd4、6、15、17、20、23,osd22和26已经down了，而我这里的osd22和26都已经移出了集群
根据官网了解到此处might_have_unfound的osd有以下四种状态
already probed querying OSD is down not queried (yet)
两种解决方案，回退旧版或者直接删除
# ceph pg 4.210 mark_unfound_lost revert Error EINVAL: pg has 1 unfound objects but we haven't probed all sources,not marking lost # ceph pg 4.210 mark_unfound_lost delete Error EINVAL: pg has 1 unfound objects but we haven't probed all sources,not marking lost
提示报错，pg那个未发现的块还没有探查所有的资源，不能标记为丢失，也就是不会回退也不可以删除
猜测可能是已经down的osd22和26未探查，刚好坏的节点也重装完成，重新添加osd
osd的删除添加过程此处不赘述了。
添加完成后，再次查看pg 4.210
"recovery_state": [
{
"name": "Started/Primary/Active",
"enter_time": "2019-07-15 15:24:32.277667",
"might_have_unfound": [
{
"osd": "4",
"status": "already probed"
},
{
"osd": "6",
"status": "already probed"
},
{
"osd": "15",
"status": "already probed"
},
{
"osd": "17",
"status": "already probed"
},
{
"osd": "20",
"status": "already probed"
},
{
"osd": "22",
"status": "already probed"
},
{
"osd": "23",
"status": "already probed"
},
{
"osd": "24",
"status": "already probed"
},
{
"osd": "26",
"status": "already probed"
}
],
"recovery_progress": {
"backfill_targets": [
"20",
"26"
],可以看到所有的资源都probed了，此时执行回退命令
# ceph pg 4.210 mark_unfound_lost revert pg has 1 objects unfound and apparently lost marking
查看集群状态
# ceph health detail HEALTH_OK
恢复池vms的min_size为2
# ceph osd pool set vms min_size 2 set pool 4 min_size to 2
感谢各位的阅读！关于“Ceph 出现pg object unfound怎么办”这篇文章就分享到这里了，希望以上内容可以对大家有一定的帮助，让大家可以学到更多知识，如果觉得文章不错，可以把它分享出去让更多的人看到吧！
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。