cisco asa 5520 8.4 (一）-- 静态nat-pat

cisco asa 5520 8.4 NAT转换配置

1）定义nat转换规则

object network 192.168.3.233_18096 #定义网络对象名

host 192.168.3.233 #定义内网IP

nat (dmz,outside) static xxx.17.xxx.36 service tcp 18096 18096 #转换规则,把内网主机192.168.3.233映射到外网xxx.17.xxx.36.

2)定义访问列表

方式一

access-list outside_access_in_1 extended permit tcp any

object 192.168.3.233_18096 eq 18096 #注意：目的地址为定义的NAT对象.

方式二

a. object service tcp_18096_acl #定义服务对象

service tcp source range 1 65535 destination eq 18096 #源端口任意端口，目的端口 #为18096

b. access-list outside_access_in_1 extended permit

object tcp_18096_acl any object 192.168.3.233_18096

4)应用访问列表

access-group outside_access_in_1 in interface outside

-----------------------------------------------------------

如下是8.4版官方配置示例：

Configuration Examples for Permitting or Denying Network Access

This section includes typical configuration examples for permitting or denying network access.

The following example adds a network object for inside server 1, performs static NAT for the server, and enables access to from the outside for inside server 1.

http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/access_rules.html