您好，登录后才能下订单哦！
密码登录
登录注册
点击 登录注册 即表示同意《亿速云用户服务条款》
这篇文章将为大家详细讲解有关怎么对XFS进行备份、恢复、修复，小编觉得挺实用的，因此分享给大家做个参考，希望大家阅读完这篇文章后可以有所收获。
XFS是高性能文件系统，由于它的高性能，XFS成为了许多企业级系统的首选，特别是有大量数据，需要结构化伸缩性和稳定性的。例如，RHEL/CentOS 7 和Oracle Linux将XFS作为默认文件系统，SUSE/openSUSE已经为XFS做了长期支持。
XFS文件系统提供了整个分区备份的工具xfsdump供用户使用，用户可以在不借助第三方软件的情况下对XFS文件系统上的数据实施备份。
创建XFS分区及测试文件
[root@localhost ~]# ls /dev/sd*/dev/sda /dev/sda1 /dev/sda2 /dev/sdb
[root@localhost ~]# fdisk /dev/sdbWelcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sdb: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x08a5199d
Device Boot Start End Blocks Id System
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
First sector (2048-41943039, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): +1G
Partition 1 of type Linux and of size 1 GiB is setCommand (m for help): p
Disk /dev/sdb: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x08a5199d
Device Boot Start End Blocks Id System
/dev/sdb1 2048 2099199 1048576 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@localhost ~]# partprobeWarning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
[root@localhost ~]# ls /dev/sd*/dev/sda /dev/sda1 /dev/sda2 /dev/sdb /dev/sdb1
[root@localhost ~]# mkfs.xfs -f /dev/sdb1meta-data=/dev/sdb1 isize=512 agcount=4, agsize=65536 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=262144, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[root@localhost ~]# blkid /dev/sdb1 /dev/sdb1: UUID="61a5e59d-92d3-458d-ac09-7d945469cda6" TYPE="xfs"[root@localhost ~]# mkdir /file[root@localhost ~]# echo "/dev/sdb1 /file xfs defaults 0 0" >> /etc/fstab[root@localhost ~]# mount -a[root@localhost ~]# df -hFilesystem Size Used Avail Use% Mounted on
/dev/mapper/rhel-root 17G 1.9G 16G 12% /
devtmpfs 901M 0 901M 0% /dev
tmpfs 912M 0 912M 0% /dev/shm
tmpfs 912M 8.7M 903M 1% /run
tmpfs 912M 0 912M 0% /sys/fs/cgroup
/dev/sr0 3.8G 3.8G 0 100% /yum
/dev/sda1 1014M 143M 872M 15% /boot
tmpfs 183M 0 183M 0% /run/user/0
/dev/sdb1 1014M 33M 982M 4% /file
[root@localhost ~]# cd /file/[root@localhost file]# ls[root@localhost file]# touch file{1..100}[root@localhost file]# lsfile1 file16 file23 file30 file38 file45 file52 file6 file67 file74 file81 file89 file96
file10 file17 file24 file31 file39 file46 file53 file60 file68 file75 file82 file9 file97
file100 file18 file25 file32 file4 file47 file54 file61 file69 file76 file83 file90 file98
file11 file19 file26 file33 file40 file48 file55 file62 file7 file77 file84 file91 file99
file12 file2 file27 file34 file41 file49 file56 file63 file70 file78 file85 file92
file13 file20 file28 file35 file42 file5 file57 file64 file71 file79 file86 file93
file14 file21 file29 file36 file43 file50 file58 file65 file72 file8 file87 file94
file15 file22 file3 file37 file44 file51 file59 file66 file73 file80 file88 file95备份XFS分区
[root@localhost file]# mkdir /backup [root@localhost file]# yum install -y xfsdump[root@localhost file]# xfsdump -f /backup/file.bak /file#利用xfsdump备份挂载点/file对应的分区xfsdump: using file dump (drive_simple) strategy xfsdump: version 3.1.4 (dump format 3.0) - type ^C for status and control ============================= dump label dialog ==============================#输入dump会话标签please enter label for this dump session (timeout in 300 sec) -> file.bak session label entered: "file.bak"--------------------------------- end dialog --------------------------------- xfsdump: level 0 dump of localhost.localdomain:/file xfsdump: dump date: Thu Oct 31 22:16:02 2019 xfsdump: session id: 02a1445f-5ff3-4518-ab2c-888d9e2a4c44 xfsdump: session label: "file.bak"xfsdump: ino map phase 1: constructing initial dump list xfsdump: ino map phase 2: skipping (no pruning necessary) xfsdump: ino map phase 3: skipping (only one dump stream) xfsdump: ino map construction complete xfsdump: estimated dump size: 52800 bytes ============================= media label dialog =============================#输入媒体标签please enter label for media in drive 0 (timeout in 300 sec) -> file media label entered: "file"--------------------------------- end dialog --------------------------------- xfsdump: creating dump session media file 0 (media 0, file 0) xfsdump: dumping ino map xfsdump: dumping directories xfsdump: dumping non-directory files xfsdump: ending media file xfsdump: media file size 86544 bytes xfsdump: dump size (non-dir files) : 0 bytes xfsdump: dump complete: 27 seconds elapsed xfsdump: Dump Summary: xfsdump: stream 0 /backup/file.bak OK (success) xfsdump: Dump Status: SUCCESS [root@localhost file]# ls /backup/#已经成功创建备份文件file.bak
恢复过程
[root@localhost file]# lsfile1 file16 file23 file30 file38 file45 file52 file6 file67 file74 file81 file89 file96 file10 file17 file24 file31 file39 file46 file53 file60 file68 file75 file82 file9 file97 file100 file18 file25 file32 file4 file47 file54 file61 file69 file76 file83 file90 file98 file11 file19 file26 file33 file40 file48 file55 file62 file7 file77 file84 file91 file99 file12 file2 file27 file34 file41 file49 file56 file63 file70 file78 file85 file92 file13 file20 file28 file35 file42 file5 file57 file64 file71 file79 file86 file93 file14 file21 file29 file36 file43 file50 file58 file65 file72 file8 file87 file94 file15 file22 file3 file37 file44 file51 file59 file66 file73 file80 file88 file95 [root@localhost file]# rm -rf *[root@localhost file]# ls[root@localhost file]# xfsrestore -f /backup/file.bak /filexfsrestore: using file dump (drive_simple) strategy xfsrestore: version 3.1.4 (dump format 3.0) - type ^C for status and control xfsrestore: searching media for dump xfsrestore: examining media file 0 xfsrestore: dump description: xfsrestore: hostname: localhost.localdomain xfsrestore: mount point: /file xfsrestore: volume: /dev/sdb1 xfsrestore: session time: Thu Oct 31 22:16:02 2019 xfsrestore: level: 0 xfsrestore: session label: "file.bak"xfsrestore: media label: "file"xfsrestore: file system id: 61a5e59d-92d3-458d-ac09-7d945469cda6 xfsrestore: session id: 02a1445f-5ff3-4518-ab2c-888d9e2a4c44 xfsrestore: media id: 2d1d9f33-dff3-4cfa-a2f6-bf65bd8f242b xfsrestore: using online session inventory xfsrestore: searching media for directory dump xfsrestore: reading directories xfsrestore: 1 directories and 100 entries processed xfsrestore: directory post-processing xfsrestore: restoring non-directory files xfsrestore: restore complete: 0 seconds elapsed xfsrestore: Restore Summary: xfsrestore: stream 0 /backup/file.bak OK (success) xfsrestore: Restore Status: SUCCESS [root@localhost file]# ls#已经成功恢复被删除的文件file1 file16 file23 file30 file38 file45 file52 file6 file67 file74 file81 file89 file96 file10 file17 file24 file31 file39 file46 file53 file60 file68 file75 file82 file9 file97 file100 file18 file25 file32 file4 file47 file54 file61 file69 file76 file83 file90 file98 file11 file19 file26 file33 file40 file48 file55 file62 file7 file77 file84 file91 file99 file12 file2 file27 file34 file41 file49 file56 file63 file70 file78 file85 file92 file13 file20 file28 file35 file42 file5 file57 file64 file71 file79 file86 file93 file14 file21 file29 file36 file43 file50 file58 file65 file72 file8 file87 file94 file15 file22 file3 file37 file44 file51 file59 file66 file73 file80 file88 file95
创建XFS测试分区
[root@localhost file]# fdisk /dev/sdbWelcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sdb: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x08a5199d
Device Boot Start End Blocks Id System
/dev/sdb1 2048 2099199 1048576 83 Linux
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p
Partition number (2-4, default 2):
First sector (2099200-41943039, default 2099200):
Using default value 2099200
Last sector, +sectors or +size{K,M,G} (2099200-41943039, default 41943039): +1G
Partition 2 of type Linux and of size 1 GiB is setCommand (m for help): p
Disk /dev/sdb: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x08a5199d
Device Boot Start End Blocks Id System
/dev/sdb1 2048 2099199 1048576 83 Linux
/dev/sdb2 2099200 4196351 1048576 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@localhost file]# partprobeWarning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
[root@localhost file]# ls /dev/sd*/dev/sda /dev/sda1 /dev/sda2 /dev/sdb /dev/sdb1 /dev/sdb2
[root@localhost file]# mkfs.xfs /dev/sdb2meta-data=/dev/sdb2 isize=512 agcount=4, agsize=65536 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=262144, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0检查XFS文件系统，如果检查过程中发现问题将会列出
[root@localhost file]# xfs_repair -n /dev/sdb2Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan (but don't clear) agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 1 - agno = 2 - agno = 3 No modify flag set, skipping phase 5 Phase 6 - check inode connectivity... - traversing filesystem ... - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify link counts... No modify flag set, skipping filesystem flush and exiting.
自动检查并修复XFS文件系统
[root@localhost file]# xfs_repair /dev/sdb2 Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 1 - agno = 2 - agno = 3 Phase 5 - rebuild AG headers and trees... - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts...done
关于“怎么对XFS进行备份、恢复、修复”这篇文章就分享到这里了，希望以上内容可以对大家有一定的帮助，使各位可以学到更多知识，如果觉得文章不错，请把它分享出去让更多的人看到。
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。