NC netcat简介

UPDATE 12/27/04security fix in -e option for Windows

Netcat 1.11 for NT- nc111nt.zip

The originalversion of Netcat was written by *hobbit* <hobbit@avian.org>

The NT version wasdone by Weld Pond <weld@vulnwatch.org>

Netcat for NT isthe tcp/ip "Swiss Army knife" that never made it into any

of the resourcekits.  It has proved to be an extremelyversatile tool on

the unix platform.So why should NT always be unix's poor cousin when it

comes to tcp/iptesting and exploration?  I bet many NTadmins out there

keep a unix boxaround to use tools such as Netcat or to test their systems

with the unixversion of an NT vulnerability exploit. With Netcat for NT

part of thatfeeling disempowerment is over.

Included with thisrelease is Hobbit's original description of the powers

of Netcat.  In this document I will briefly describe someof the things an

NT admin mightwant to do and know about with Netcat on NT. For more

detailed technicalinformation please read hobbit.txt included in the

nc11nt.ziparchive.

     Basic Features

     * Outbound or inbound connections, TCP orUDP, to or from any ports

     * Full DNS forward/reverse checking, withappropriate warnings

     * Ability to use any local source port

     * Ability to use any locally-configurednetwork source address

     * Built-in port-scanning capabilities,with randomizer

     * Can read command line arguments fromstandard input

     * Slow-send mode, one line every N seconds

     * Hex dump of transmitted and receiveddata

     * Ability to let another program serviceestablished

       connections

     * Telnet-options responder

     New for NT

     * Ability to run in the background withouta console window

     * Ability to restart as a single-threadedserver to handle a new

       connection

A simple exampleof using Netcat is to pull down a web page from a web

server.  With Netcat you get to see the full HTTPheader so you can see

which web server aparticular site is running.

Since NT has arather anemic command processor, some of the things that are

easy in unix maybe a bit more clunky in NT. For the web page example first

create a fileget.txt that contains the following line and then a blank

line:

GET / HTTP/1.0

To use Netcat toretrieve the home page of a web site use the command:

nc -vwww.website.com 80 < get.txt

You will seeNetcat make a connection to port 80, send the text contained

in the fileget.txt, and then output the web server's response to stdout.

The -v is forverbose(冗长). It tells you a little info about the connection

when it starts.

It is a bit easierto just open the connection and then type at the console

to do the samething.

nc -vwww.website.com 80

Then just type inGET / HTTP/1.0 and hit a couple of returns. You will

see the same thingas above.

A far more exciting thing to do is to get a quickshell going on a remote

machine by using the -l or "listen" optionand the -e or "execute"

option.  You run Netcat listening onparticular port for a connection.

When a connectionis made, Netcat executes the program of your choice

and connects thestdin and stdout of the program to the network connection.

nc -l -p 23 -t -ecmd.exe

will get Netcat listeningon port 23 (telnet).  When it getsconnected to

by a client itwill spawn产生 a shell (cmd.exe).  The -t option tells Netcat

to handle anytelnet negotiation the client might expect.

This will allowyou to telnet to the machine you have Netcat listening on

and get a cmd.exeshell when you connect.  You could justas well use

Netcat instead oftelnet:

nc xxx.xxx.xxx.xxx23

把nc当作服务器端，监听指定端口，并且回应处理针对该端口的telnet连接

will get the jobdone.  There is no authentication on thelistening side

so be a bit carefulhere.  The shell is running with thepermissions of the

process thatstarted Netcat so be very careful.  Ifyou were to use the

AT program toschedule Netcat to run listening on a port with the

-e cmd.exe option,when you connected you would get a shell with user

NTAUTHORITY\SYSTEM.

通过nc获得的shell的权限与启动nc的进程的权限一样。那么启动nc的是哪个进程呢？如何判断？

The beauty ofNetcat really shines when you realize that you can get it

listening on ANYport doing the same thing.  Do a littleexploring and

see if thefirewall you may be behind lets port 53 through.  Run Netcat

listening behindthe firewall on port 53. 

nc -L -p 53 -ecmd.exe

Then from outsidethe firewall connect to the listening machine:

nc -vxxx.xxx.xxx.xx 53

If you get acommand prompt then you are executing commands on the

listeningmachine.  Use 'exit' at the commandprompt for a clean

disconnect. The -L (note the capital L) option will restart Netcat with

the samecommand line when the connection is terminated. This way you can

connectover and over to the same Netcat process.

A new feature forthe NT version is the -d or detach分离 from console flag.

This will letNetcat run without an ugly console window cluttering up the

screen or showingup in the task list.

You can even getNetcat to listen on the NETBIOS ports that are probably

running on most NTmachines.  This way you can get aconnection to a

machine that mayhave port filtering enabled in the TCP/IP Security Network

controlpanel.  Unlike Unix, NT does not seem tohave any security around

which ports thatuser programs are allowed to bind to. This means any

user can run aprogram that will bind to the NETBIOS ports.

You will need tobind "in front of" some services that may already be

listening on thoseports.  An example is the NETBIOS SessionService that

is running on port139 of NT machines that are sharing files. You need

to bind to aspecific source address (one of the IP addresses of the

machine) toaccomplish this.  This gives Netcat priorityover the NETBIOS

service which is at a lowerpriority because it is bound to ANY IP address.

This is done withthe Netcat -s option:

nc -v -L -ecmd.exe -p 139 -s xxx.xxx.xxx.xxx

Now you canconnect to the machine on port 139 and Netcat will field

the connectionbefore NETBIOS does.  You have effectivelyshut off

file sharing onthis machine by the way.  You have donethis with just

user privileges toboot.

将nc绑定在一个已经正常使用中的端口上，但是这需要指定服务器的IP来提高nc的优先级，实质上是抢占了该端口的功能。之前的该端口的正常功能将不能再使用。

PROBLEMS withNetcat 1.1 for NT

There are a fewknown problems that will eventually be fixed. One is

the -w or timeoutoption.  This works for final net readsbut not

forconnections.  Another problem is usingthe -e option in UDP mode.

You may find thatsome of the features work on Windows 95. Most

of the listeningfeatures will not work on Windows 95 however.  These will

be fixed in alater release.

Netcat isdistributed with full source code so that people can build

upon thiswork.  If you add something useful ordiscover something

interesting aboutNT TCP/IP let met know.

Weld Pond<weld@l0pht.com>, 2/2/98