用命令行界面升级AXIS摄像头firmware

发布时间:2020-06-11 01:23:31 作者:simmy
来源:网络 阅读:730

FTP procedure:
Marko: - Please connect via an elevated command prompt and FTP the camera
Marko: ftp IP_CAMERA
Marko: - Please use your user ROOT and it's password
Marko: - Here the commands that you will need to use for the reflash:
Marko: bin
Marko: hash
Marko: put P3301_5_40_9_4.bin flash_all
Marko:
Marko: please replace FileFirmware with the right one and the " are not needed 


打开CMD,输入ftp 192.168.1.22,系统会弹出提示输入用户名及密码

然后输入: bin

然后输入: hash

然后输入: put c:\test\P3301_5_40_9_4.bin flash_all


屏幕提示过程信息,然后顺利完成:

The system upgrade completed successfully.
The unit will now reboot.
To continue, please connect to the unit again.
There may be a short delay before the new connection is accepted.
This connection will now close.
214 Virtual target exit.
221 Goodbye.
ftp: 22937624 bytes sent in 2.93Seconds 7828.54Kbytes/sec.


之前通过软件界面及http界面都失败。

推荐阅读:
  1. DELL BIOS FIRMWARE升级(12G之前)
  2. axis2 service archiver 空界面

免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。

升级 摄像头 命令行

上一篇:任意输入一个正整数,从高位向低位依次输出,或从低位向高位依次输出(数组,调用函数两种方法)

下一篇:VS2010与.NET4系列 8. ASP.NET 4 Web Forms的URL路由

相关阅读

您好,登录后才能下订单哦!

密码登录
登录注册
其他方式登录
点击 登录注册 即表示同意《亿速云用户服务条款》