您好,登录后才能下订单哦!
上一篇文章中kubernetes系列教程(七)深入玩转pod调度介绍了kubernetes中Pod的调度机制,通过实战演练介绍Pod调度到node的几种方法:1. 通过nodeName固定选择调度,2. 通过nodeSelector定向选择调度,3. 通过node Affinity亲和力调度,接下来介绍kubernetes系列教程pod的健康检查机制。
应用在运行过程中难免会出现错误,如程序异常,软件异常,硬件故障,网络故障等,kubernetes提供Health Check健康检查机制,当发现应用异常时会自动重启容器,将应用从service服务中剔除,保障应用的高可用性。k8s定义了三种探针Probe:
每种探测机制支持三种健康检查方法,分别是命令行exec,httpGet和tcpSocket,其中exec通用性最强,适用与大部分场景,tcpSocket适用于TCP业务,httpGet适用于web业务。
每种探测方法能支持几个相同的检查参数,用于设置控制检查时间:
许多应用程序运行过程中无法检测到内部故障,如死锁,出现故障时通过重启业务可以恢复,kubernetes提供liveness在线健康检查机制,我们以exec为例,创建一个容器启动过程中创建一个文件/tmp/liveness-probe.log,10s后将其删除,定义liveness健康检查机制在容器中执行命令ls -l /tmp/liveness-probe.log,通过文件的返回码判断健康状态,如果返回码非0,暂停20s后kubelet会自动将该容器重启。
[root@node-1 demo]# cat centos-exec-liveness-probe.yaml
apiVersion: v1
kind: Pod
metadata:
name: exec-liveness-probe
annotations:
kubernetes.io/description: "exec-liveness-probe"
spec:
containers:
- name: exec-liveness-probe
image: centos:latest
imagePullPolicy: IfNotPresent
args: #容器启动命令,生命周期为30s
- /bin/sh
- -c
- touch /tmp/liveness-probe.log && sleep 10 && rm -f /tmp/liveness-probe.log && sleep 20
livenessProbe:
exec: #健康检查机制,通过ls -l /tmp/liveness-probe.log返回码判断容器的健康状态
command:
- ls
- l
- /tmp/liveness-probe.log
initialDelaySeconds: 1
periodSeconds: 5
timeoutSeconds: 1
[root@node-1 demo]# kubectl apply -f centos-exec-liveness-probe.yaml
pod/exec-liveness-probe created
[root@node-1 demo]# kubectl describe pods exec-liveness-probe | tail
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal Scheduled 28s default-scheduler Successfully assigned default/exec-liveness-probe to node-3
Normal Pulled 27s kubelet, node-3 Container image "centos:latest" already present on machine
Normal Created 27s kubelet, node-3 Created container exec-liveness-probe
Normal Started 27s kubelet, node-3 Started container exec-liveness-probe
#容器已启动
Warning Unhealthy 20s (x2 over 25s) kubelet, node-3 Liveness probe failed: /tmp/liveness-probe.log
ls: cannot access l: No such file or directory #执行健康检查,检查异常
Warning Unhealthy 15s kubelet, node-3 Liveness probe failed: ls: cannot access l: No such file or directory
ls: cannot access /tmp/liveness-probe.log: No such file or directory
Normal Killing 15s kubelet, node-3 Container exec-liveness-probe failed liveness probe, will be restarted
#重启容器
[root@node-1 demo]# kubectl get pods exec-liveness-probe
NAME READY STATUS RESTARTS AGE
exec-liveness-probe 1/1 Running 6 5m19s
[root@node-1 demo]# cat nginx-httpGet-liveness-readiness.yaml
apiVersion: v1
kind: Pod
metadata:
name: nginx-httpget-livess-readiness-probe
annotations:
kubernetes.io/description: "nginx-httpGet-livess-readiness-probe"
spec:
containers:
- name: nginx-httpget-livess-readiness-probe
image: nginx:latest
ports:
- name: http-80-port
protocol: TCP
containerPort: 80
livenessProbe: #健康检查机制,通过httpGet实现实现检查
httpGet:
port: 80
scheme: HTTP
path: /index.html
initialDelaySeconds: 3
periodSeconds: 10
timeoutSeconds: 3
[root@node-1 demo]# kubectl apply -f nginx-httpGet-liveness-readiness.yaml
pod/nginx-httpget-livess-readiness-probe created
[root@node-1 demo]# kubectl get pods nginx-httpget-livess-readiness-probe
NAME READY STATUS RESTARTS AGE
nginx-httpget-livess-readiness-probe 1/1 Running 0 6s
查询pod所属的节点
[root@node-1 demo]# kubectl get pods nginx-httpget-livess-readiness-probe -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
nginx-httpget-livess-readiness-probe 1/1 Running 1 3m9s 10.244.2.19 node-3 <none> <none>
登录到pod中将文件删除
[root@node-1 demo]# kubectl exec -it nginx-httpget-livess-readiness-probe /bin/bash
root@nginx-httpget-livess-readiness-probe:/# ls -l /usr/share/nginx/html/index.html
-rw-r--r-- 1 root root 612 Sep 24 14:49 /usr/share/nginx/html/index.html
root@nginx-httpget-livess-readiness-probe:/# rm -f /usr/share/nginx/html/index.html
[root@node-1 demo]# kubectl get pods nginx-httpget-livess-readiness-probe
NAME READY STATUS RESTARTS AGE
nginx-httpget-livess-readiness-probe 1/1 Running 1 4m22s
[root@node-1 demo]# kubectl describe pods nginx-httpget-livess-readiness-probe | tail
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal Scheduled 5m45s default-scheduler Successfully assigned default/nginx-httpget-livess-readiness-probe to node-3
Normal Pulling 3m29s (x2 over 5m45s) kubelet, node-3 Pulling image "nginx:latest"
Warning Unhealthy 3m29s (x3 over 3m49s) kubelet, node-3 Liveness probe failed: HTTP probe failed with statuscode: 404
Normal Killing 3m29s kubelet, node-3 Container nginx-httpget-livess-readiness-probe failed liveness probe, will be restarted
Normal Pulled 3m25s (x2 over 5m41s) kubelet, node-3 Successfully pulled image "nginx:latest"
Normal Created 3m25s (x2 over 5m40s) kubelet, node-3 Created container nginx-httpget-livess-readiness-probe
Normal Started 3m25s (x2 over 5m40s) kubelet, node-3 Started container nginx-httpget-livess-readiness-probe
[root@node-1 demo]# cat nginx-tcp-liveness.yaml
apiVersion: v1
kind: Pod
metadata:
name: nginx-tcp-liveness-probe
annotations:
kubernetes.io/description: "nginx-tcp-liveness-probe"
spec:
containers:
- name: nginx-tcp-liveness-probe
image: nginx:latest
ports:
- name: http-80-port
protocol: TCP
containerPort: 80
livenessProbe: #健康检查为tcpSocket,探测TCP 80端口
tcpSocket:
port: 80
initialDelaySeconds: 3
periodSeconds: 10
timeoutSeconds: 3
[root@node-1 demo]# kubectl apply -f nginx-tcp-liveness.yaml
pod/nginx-tcp-liveness-probe created
[root@node-1 demo]# kubectl get pods nginx-tcp-liveness-probe
NAME READY STATUS RESTARTS AGE
nginx-tcp-liveness-probe 1/1 Running 0 6s
获取pod所在node
[root@node-1 demo]# kubectl get pods nginx-tcp-liveness-probe -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
nginx-tcp-liveness-probe 1/1 Running 0 99s 10.244.2.20 node-3 <none> <none>
登录到pod中
[root@node-1 demo]# kubectl exec -it nginx-httpget-livess-readiness-probe /bin/bash
#执行apt-get update更新和apt-get install htop安装工具
root@nginx-httpget-livess-readiness-probe:/# apt-get update
Get:1 http://cdn-fastly.deb.debian.org/debian buster InRelease [122 kB]
Get:2 http://security-cdn.debian.org/debian-security buster/updates InRelease [39.1 kB]
Get:3 http://cdn-fastly.deb.debian.org/debian buster-updates InRelease [49.3 kB]
Get:4 http://security-cdn.debian.org/debian-security buster/updates/main amd64 Packages [95.7 kB]
Get:5 http://cdn-fastly.deb.debian.org/debian buster/main amd64 Packages [7899 kB]
Get:6 http://cdn-fastly.deb.debian.org/debian buster-updates/main amd64 Packages [5792 B]
Fetched 8210 kB in 3s (3094 kB/s)
Reading package lists... Done
root@nginx-httpget-livess-readiness-probe:/# apt-get install htop
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
lsof strace
The following NEW packages will be installed:
htop
0 upgraded, 1 newly installed, 0 to remove and 5 not upgraded.
Need to get 92.8 kB of archives.
After this operation, 230 kB of additional disk space will be used.
Get:1 http://cdn-fastly.deb.debian.org/debian buster/main amd64 htop amd64 2.2.0-1+b1 [92.8 kB]
Fetched 92.8 kB in 0s (221 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package htop.
(Reading database ... 7203 files and directories currently installed.)
Preparing to unpack .../htop_2.2.0-1+b1_amd64.deb ...
Unpacking htop (2.2.0-1+b1) ...
Setting up htop (2.2.0-1+b1) ...
root@nginx-httpget-livess-readiness-probe:/# kill 1
root@nginx-httpget-livess-readiness-probe:/# command terminated with exit code 137
查看pod情况
[root@node-1 demo]# kubectl get pods nginx-tcp-liveness-probe
NAME READY STATUS RESTARTS AGE
nginx-tcp-liveness-probe 1/1 Running 1 13m
[root@node-1 demo]# kubectl describe pods nginx-tcp-liveness-probe | tail
Tolerations: node.kubernetes.io/not-ready:NoExecute for 300s
node.kubernetes.io/unreachable:NoExecute for 300s
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal Scheduled 14m default-scheduler Successfully assigned default/nginx-tcp-liveness-probe to node-3
Normal Pulling 44s (x2 over 14m) kubelet, node-3 Pulling image "nginx:latest"
Normal Pulled 40s (x2 over 14m) kubelet, node-3 Successfully pulled image "nginx:latest"
Normal Created 40s (x2 over 14m) kubelet, node-3 Created container nginx-tcp-liveness-probe
Normal Started 40s (x2 over 14m) kubelet, node-3 Started container nginx-tcp-liveness-probe
就绪检查用于应用接入到service的场景,用于判断应用是否已经就绪完毕,即是否可以接受外部转发的流量,健康检查正常则将pod加入到service的endpoints中,健康检查异常则从service的endpoints中删除,避免影响业务的访问。
[root@node-1 demo]# cat httpget-liveness-readiness-probe.yaml
apiVersion: v1
kind: Pod
metadata:
name: nginx-tcp-liveness-probe
annotations:
kubernetes.io/description: "nginx-tcp-liveness-probe"
labels: #需要定义labels,后面定义的service需要调用
app: nginx
spec:
containers:
- name: nginx-tcp-liveness-probe
image: nginx:latest
ports:
- name: http-80-port
protocol: TCP
containerPort: 80
livenessProbe: #存活检查探针
httpGet:
port: 80
path: /index.html
scheme: HTTP
initialDelaySeconds: 3
periodSeconds: 10
timeoutSeconds: 3
readinessProbe: #就绪检查探针
httpGet:
port: 80
path: /test.html
scheme: HTTP
initialDelaySeconds: 3
periodSeconds: 10
timeoutSeconds: 3
[root@node-1 demo]# cat nginx-service.yaml
apiVersion: v1
kind: Service
metadata:
labels:
app: nginx
name: nginx-service
spec:
ports:
- name: http
port: 80
protocol: TCP
targetPort: 80
selector:
app: nginx
type: ClusterIP
[root@node-1 demo]# kubectl apply -f httpget-liveness-readiness-probe.yaml
pod/nginx-tcp-liveness-probe created
[root@node-1 demo]# kubectl apply -f nginx-service.yaml
service/nginx-service created
[root@node-1 ~]# kubectl get pods nginx-httpget-livess-readiness-probe
NAME READY STATUS RESTARTS AGE
nginx-httpget-livess-readiness-probe 1/1 Running 2 153m
#readiness健康检查异常,404报错(最后一行)
[root@node-1 demo]# kubectl describe pods nginx-tcp-liveness-probe | tail
node.kubernetes.io/unreachable:NoExecute for 300s
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal Scheduled 2m6s default-scheduler Successfully assigned default/nginx-tcp-liveness-probe to node-3
Normal Pulling 2m5s kubelet, node-3 Pulling image "nginx:latest"
Normal Pulled 2m1s kubelet, node-3 Successfully pulled image "nginx:latest"
Normal Created 2m1s kubelet, node-3 Created container nginx-tcp-liveness-probe
Normal Started 2m1s kubelet, node-3 Started container nginx-tcp-liveness-probe
Warning Unhealthy 2s (x12 over 112s) kubelet, node-3 Readiness probe failed: HTTP probe failed with statuscode: 404
[root@node-1 ~]# kubectl describe services nginx-service
Name: nginx-service
Namespace: default
Labels: app=nginx
Annotations: kubectl.kubernetes.io/last-applied-configuration:
{"apiVersion":"v1","kind":"Service","metadata":{"annotations":{},"labels":{"app":"nginx"},"name":"nginx-service","namespace":"default"},"s...
Selector: app=nginx
Type: ClusterIP
IP: 10.110.54.40
Port: http 80/TCP
TargetPort: 80/TCP
Endpoints: <none> #Endpoints对象为空
Session Affinity: None
Events: <none>
#endpoints状态
[root@node-1 demo]# kubectl describe endpoints nginx-service
Name: nginx-service
Namespace: default
Labels: app=nginx
Annotations: endpoints.kubernetes.io/last-change-trigger-time: 2019-09-30T14:27:37Z
Subsets:
Addresses: <none>
NotReadyAddresses: 10.244.2.22 #pod处于NotReady状态
Ports:
Name Port Protocol
---- ---- --------
http 80 TCP
Events: <none>
[root@node-1 ~]# kubectl exec -it nginx-httpget-livess-readiness-probe /bin/bash
root@nginx-httpget-livess-readiness-probe:/# echo "readiness probe demo" >/usr/share/nginx/html/test.html
健康检查正常
[root@node-1 demo]# curl http://10.244.2.22/test.html
查看endpoints情况
readines[root@node-1 demo]# kubectl describe endpoints nginx-service
Name: nginx-service
Namespace: default
Labels: app=nginx
Annotations: endpoints.kubernetes.io/last-change-trigger-time: 2019-09-30T14:33:01Z
Subsets:
Addresses: 10.244.2.22 #就绪地址,已从NotReady中提出,加入到正常的Address列表中
NotReadyAddresses: <none>
Ports:
Name Port Protocol
---- ---- --------
http 80 TCP
查看service状态
[root@node-1 demo]# kubectl describe services nginx-service
Name: nginx-service
Namespace: default
Labels: app=nginx
Annotations: kubectl.kubernetes.io/last-applied-configuration:
{"apiVersion":"v1","kind":"Service","metadata":{"annotations":{},"labels":{"app":"nginx"},"name":"nginx-service","namespace":"default"},"s...
Selector: app=nginx
Type: ClusterIP
IP: 10.110.54.40
Port: http 80/TCP
TargetPort: 80/TCP
Endpoints: 10.244.2.22:80 #已和endpoints关联
Session Affinity: None
Events: <none>
删除站点信息,使健康检查异常
[root@node-1 demo]# kubectl exec -it nginx-tcp-liveness-probe /bin/bash
root@nginx-tcp-liveness-probe:/# rm -f /usr/share/nginx/html/test.html
查看pod健康检查event日志
[root@node-1 demo]# kubectl get pods nginx-tcp-liveness-probe
NAME READY STATUS RESTARTS AGE
nginx-tcp-liveness-probe 0/1 Running 0 11m
[root@node-1 demo]# kubectl describe pods nginx-tcp-liveness-probe | tail
node.kubernetes.io/unreachable:NoExecute for 300s
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal Scheduled 12m default-scheduler Successfully assigned default/nginx-tcp-liveness-probe to node-3
Normal Pulling 12m kubelet, node-3 Pulling image "nginx:latest"
Normal Pulled 11m kubelet, node-3 Successfully pulled image "nginx:latest"
Normal Created 11m kubelet, node-3 Created container nginx-tcp-liveness-probe
Normal Started 11m kubelet, node-3 Started container nginx-tcp-liveness-probe
Warning Unhealthy 119s (x32 over 11m) kubelet, node-3 Readiness probe failed: HTTP probe failed with statuscode: 404
查看endpoints
[root@node-1 demo]# kubectl describe endpoints nginx-service
Name: nginx-service
Namespace: default
Labels: app=nginx
Annotations: endpoints.kubernetes.io/last-change-trigger-time: 2019-09-30T14:38:01Z
Subsets:
Addresses: <none>
NotReadyAddresses: 10.244.2.22 #健康检查异常,此时加入到NotReady状态
Ports:
Name Port Protocol
---- ---- --------
http 80 TCP
Events: <none>
查看service状态,此时endpoints为空
[root@node-1 demo]# kubectl describe services nginx-service
Name: nginx-service
Namespace: default
Labels: app=nginx
Annotations: kubectl.kubernetes.io/last-applied-configuration:
{"apiVersion":"v1","kind":"Service","metadata":{"annotations":{},"labels":{"app":"nginx"},"name":"nginx-service","namespace":"default"},"s...
Selector: app=nginx
Type: ClusterIP
IP: 10.110.54.40
Port: http 80/TCP
TargetPort: 80/TCP
Endpoints: #为空
Session Affinity: None
Events: <none>
TKE中可以设定应用的健康检查机制,健康检查机制包含在不同的Workload中,可以通过模板生成健康监测机制,定义过程中可以选择高级选项,默认健康检查机制是关闭状态,包含前面介绍的两种探针:存活探针livenessProbe和就绪探针readinessProbe,根据需要分别开启
开启探针之后进入设置健康检查,支持上述介绍的三种方法:执行命令检查、TCP端口检查,HTTP请求检查
选择不同的检查方法填写不同的参数即可,如启动间隔,检查间隔,响应超时,等参数,以HTTP请求检查方法为例:
设置完成后创建workload时候会自动生成yaml文件,以刚创建的deployment为例,生成健康检查yaml文件内容如下:
apiVersion: apps/v1beta2
kind: Deployment
metadata:
annotations:
deployment.kubernetes.io/revision: "1"
description: tke-health-check-demo
creationTimestamp: "2019-09-30T12:28:42Z"
generation: 1
labels:
k8s-app: tke-health-check-demo
qcloud-app: tke-health-check-demo
name: tke-health-check-demo
namespace: default
resourceVersion: "2060365354"
selfLink: /apis/apps/v1beta2/namespaces/default/deployments/tke-health-check-demo
uid: d6cf1f25-e37d-11e9-87fd-567eb17a3218
spec:
minReadySeconds: 10
progressDeadlineSeconds: 600
replicas: 1
revisionHistoryLimit: 10
selector:
matchLabels:
k8s-app: tke-health-check-demo
qcloud-app: tke-health-check-demo
strategy:
rollingUpdate:
maxSurge: 1
maxUnavailable: 0
type: RollingUpdate
template:
metadata:
creationTimestamp: null
labels:
k8s-app: tke-health-check-demo
qcloud-app: tke-health-check-demo
spec:
containers:
- image: nginx:latest
imagePullPolicy: Always
livenessProbe: #通过模板生成的健康检查机制
failureThreshold: 1
httpGet:
path: /
port: 80
scheme: HTTP
periodSeconds: 3
successThreshold: 1
timeoutSeconds: 2
name: tke-health-check-demo
resources:
limits:
cpu: 500m
memory: 1Gi
requests:
cpu: 250m
memory: 256Mi
securityContext:
privileged: false
procMount: Default
terminationMessagePath: /dev/termination-log
terminationMessagePolicy: File
dnsPolicy: ClusterFirst
imagePullSecrets:
- name: qcloudregistrykey
- name: tencenthubkey
restartPolicy: Always
schedulerName: default-scheduler
securityContext: {}
terminationGracePeriodSeconds: 30
本章介绍kubernetes中健康检查两种Probe:livenessProbe和readinessProbe,livenessProbe主要用于存活检查,检查容器内部运行状态,readiness主要用于就绪检查,是否可以接受流量,通常需要和service的endpoints结合,当就绪准备妥当时加入到endpoints中,当就绪异常时从endpoints中删除,从而实现了services的健康检查和服务探测机制。对于Probe机制提供了三种检测的方法,分别适用于不同的场景:1. exec命令行,通过命令或shell实现健康检查,2. tcpSocket通过TCP协议探测端口,建立tcp连接,3. httpGet通过建立http请求探测,读者可多实操掌握其用法。
健康检查:https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/
TKE健康检查设置方法:https://cloud.tencent.com/document/product/457/32815
当你的才华撑不起你的野心时,你就应该静下心来学习
返回kubernetes系列教程目录
**如果觉得文章对您有帮助,请订阅专栏,分享给有需要的朋友吧
免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。