您好，登录后才能下订单哦！
密码登录
登录注册
点击 登录注册 即表示同意《亿速云用户服务条款》
本篇内容主要讲解“JavaScript正则表达式中g标志实例分析”，感兴趣的朋友不妨来看看。本文介绍的方法操作简单快捷，实用性强。下面就让小编来带大家学习“JavaScript正则表达式中g标志实例分析”吧!
有一天在思否社区看到有个问题，大致描述如下
const list = ['a', 'b', '-', 'c', 'd']; const reg = /[a-z]/g; const letters = list.filter(i => reg.test(i)); // letters === ['a', 'c']; // 如果正则不使用`g`标志可以得到所有的字母 // 为什么加入`g`之后就不可以了
对问题而言，遍历中的i就是一个字符，不需要用到g。
但是就我对正则的理解（过于浅薄）感觉上有没有g（只是全局搜索，不会匹配到就停下来）应该不影响，激发了我的好奇心。
上面题的建议写法如下
const reg = /[a-z]/g;
reg.test('a'); // => true
reg.test('a'); // => false
reg.test('a'); // => true
reg.test('a'); // => false
reg.test('a'); // => true首先可以确定的表现一定是g导致的
打开 MDN 仔细查看g标志的作用，得到结论和我的理解无二。
我猜想应该就是g可能启用了某种缓存，又因为reg相对过滤器是全局变量，我将代码改为：
const list = ['a', 'b', '-', 'c', 'd']; const letters = list.filter(i => /[a-z]/g.test(i)); // letters === ['a', 'b', 'c', 'd'];
将正则声明到每一次遍历，得到结论就是正确的，验证了我的猜想。也得到了，缓存就是正则中的某个地方
下面我找到对应的源码来查看问题的原因
由于最近在看 Rust，所以使用 Rust 编写的源码查看
打开项目后，点击.进入 vscode 模式，command+p 搜索 regexp 关键词
进入test.rs文件，command+f 搜索/g可以找到在 90 行有个last_index()的测试
#[test]
fn last_index() {
let mut context = Context::default();
let init = r#"
var regex = /[0-9]+(\.[0-9]+)?/g;
"#;
// forward 的作用：更改 context，并返回结果的字符串。
eprintln!("{}", forward(&mut context, init));
assert_eq!(forward(&mut context, "regex.lastIndex"), "0");
assert_eq!(forward(&mut context, "regex.test('1.0foo')"), "true");
assert_eq!(forward(&mut context, "regex.lastIndex"), "3");
assert_eq!(forward(&mut context, "regex.test('1.0foo')"), "false");
assert_eq!(forward(&mut context, "regex.lastIndex"), "0");
}看到了有lastIndex关键字，这里再已经大致猜到问题的原因了，g 标志存在匹配后的最后一个下标，导致出现问题。
我们将视线移入到mod.rs文件中，搜索test
在 631 行看到了fn test()方法
pub(crate) fn test(
this: &JsValue,
args: &[JsValue],
context: &mut Context,
) -> JsResult<JsValue> {
// 1. Let R be the this value.
// 2. If Type(R) is not Object, throw a TypeError exception.
let this = this.as_object().ok_or_else(|| {
context
.construct_type_error("RegExp.prototype.test method called on incompatible value")
})?;
// 3. Let string be ? ToString(S).
let arg_str = args
.get(0)
.cloned()
.unwrap_or_default()
.to_string(context)?;
// 4. Let match be ? RegExpExec(R, string).
let m = Self::abstract_exec(this, arg_str, context)?;
// 5. If match is not null, return true; else return false.
if m.is_some() {
Ok(JsValue::new(true))
} else {
Ok(JsValue::new(false))
}
}在test()方法中找到了Self::abstract_exec()方法
pub(crate) fn abstract_exec(
this: &JsObject,
input: JsString,
context: &mut Context,
) -> JsResult<Option<JsObject>> {
// 1. Assert: Type(R) is Object.
// 2. Assert: Type(S) is String.
// 3. Let exec be ? Get(R, "exec").
let exec = this.get("exec", context)?;
// 4. If IsCallable(exec) is true, then
if let Some(exec) = exec.as_callable() {
// a. Let result be ? Call(exec, R, « S »).
let result = exec.call(&this.clone().into(), &[input.into()], context)?;
// b. If Type(result) is neither Object nor Null, throw a TypeError exception.
if !result.is_object() && !result.is_null() {
return context.throw_type_error("regexp exec returned neither object nor null");
}
// c. Return result.
return Ok(result.as_object().cloned());
}
// 5. Perform ? RequireInternalSlot(R, [[RegExpMatcher]]).
if !this.is_regexp() {
return context.throw_type_error("RegExpExec called with invalid value");
}
// 6. Return ? RegExpBuiltinExec(R, S).
Self::abstract_builtin_exec(this, &input, context)
}又在Self::abstract_exec()方法中找到了Self::abstract_builtin_exec()方法
pub(crate) fn abstract_builtin_exec(
this: &JsObject,
input: &JsString,
context: &mut Context,
) -> JsResult<Option<JsObject>> {
// 1. Assert: R is an initialized RegExp instance.
let rx = {
let obj = this.borrow();
if let Some(rx) = obj.as_regexp() {
rx.clone()
} else {
return context.throw_type_error("RegExpBuiltinExec called with invalid value");
}
};
// 2. Assert: Type(S) is String.
// 3. Let length be the number of code units in S.
let length = input.encode_utf16().count();
// 4. Let lastIndex be ℝ(? ToLength(? Get(R, "lastIndex"))).
let mut last_index = this.get("lastIndex", context)?.to_length(context)?;
// 5. Let flags be R.[[OriginalFlags]].
let flags = &rx.original_flags;
// 6. If flags contains "g", let global be true; else let global be false.
let global = flags.contains('g');
// 7. If flags contains "y", let sticky be true; else let sticky be false.
let sticky = flags.contains('y');
// 8. If global is false and sticky is false, set lastIndex to 0.
if !global && !sticky {
last_index = 0;
}
// 9. Let matcher be R.[[RegExpMatcher]].
let matcher = &rx.matcher;
// 10. If flags contains "u", let fullUnicode be true; else let fullUnicode be false.
let unicode = flags.contains('u');
// 11. Let matchSucceeded be false.
// 12. Repeat, while matchSucceeded is false,
let match_value = loop {
// a. If lastIndex > length, then
if last_index > length {
// i. If global is true or sticky is true, then
if global || sticky {
// 1. Perform ? Set(R, "lastIndex", +0????, true).
this.set("lastIndex", 0, true, context)?;
}
// ii. Return null.
return Ok(None);
}
// b. Let r be matcher(S, lastIndex).
// Check if last_index is a valid utf8 index into input.
let last_byte_index = match String::from_utf16(
&input.encode_utf16().take(last_index).collect::<Vec<u16>>(),
) {
Ok(s) => s.len(),
Err(_) => {
return context
.throw_type_error("Failed to get byte index from utf16 encoded string")
}
};
let r = matcher.find_from(input, last_byte_index).next();
match r {
// c. If r is failure, then
None => {
// i. If sticky is true, then
if sticky {
// 1. Perform ? Set(R, "lastIndex", +0????, true).
this.set("lastIndex", 0, true, context)?;
// 2. Return null.
return Ok(None);
}
// ii. Set lastIndex to AdvanceStringIndex(S, lastIndex, fullUnicode).
last_index = advance_string_index(input, last_index, unicode);
}
Some(m) => {
// c. If r is failure, then
#[allow(clippy::if_not_else)]
if m.start() != last_index {
// i. If sticky is true, then
if sticky {
// 1. Perform ? Set(R, "lastIndex", +0????, true).
this.set("lastIndex", 0, true, context)?;
// 2. Return null.
return Ok(None);
}
// ii. Set lastIndex to AdvanceStringIndex(S, lastIndex, fullUnicode).
last_index = advance_string_index(input, last_index, unicode);
// d. Else,
} else {
//i. Assert: r is a State.
//ii. Set matchSucceeded to true.
break m;
}
}
}
};
// 13. Let e be r's endIndex value.
let mut e = match_value.end();
// 14. If fullUnicode is true, then
if unicode {
// e is an index into the Input character list, derived from S, matched by matcher.
// Let eUTF be the smallest index into S that corresponds to the character at element e of Input.
// If e is greater than or equal to the number of elements in Input, then eUTF is the number of code units in S.
// b. Set e to eUTF.
e = input.split_at(e).0.encode_utf16().count();
}
// 15. If global is true or sticky is true, then
if global || sticky {
// a. Perform ? Set(R, "lastIndex", ????(e), true).
this.set("lastIndex", e, true, context)?;
}
// 16. Let n be the number of elements in r's captures List. (This is the same value as 22.2.2.1's NcapturingParens.)
let n = match_value.captures.len();
// 17. Assert: n < 23^2 - 1.
debug_assert!(n < 23usize.pow(2) - 1);
// 18. Let A be ! ArrayCreate(n + 1).
// 19. Assert: The mathematical value of A's "length" property is n + 1.
let a = Array::array_create(n + 1, None, context)?;
// 20. Perform ! CreateDataPropertyOrThrow(A, "index", ????(lastIndex)).
a.create_data_property_or_throw("index", match_value.start(), context)
.expect("this CreateDataPropertyOrThrow call must not fail");
// 21. Perform ! CreateDataPropertyOrThrow(A, "input", S).
a.create_data_property_or_throw("input", input.clone(), context)
.expect("this CreateDataPropertyOrThrow call must not fail");
// 22. Let matchedSubstr be the substring of S from lastIndex to e.
let matched_substr = if let Some(s) = input.get(match_value.range()) {
s
} else {
""
};
// 23. Perform ! CreateDataPropertyOrThrow(A, "0", matchedSubstr).
a.create_data_property_or_throw(0, matched_substr, context)
.expect("this CreateDataPropertyOrThrow call must not fail");
// 24. If R contains any GroupName, then
// 25. Else,
let named_groups = match_value.named_groups();
let groups = if named_groups.clone().count() > 0 {
// a. Let groups be ! OrdinaryObjectCreate(null).
let groups = JsValue::from(JsObject::empty());
// Perform 27.f here
// f. If the ith capture of R was defined with a GroupName, then
// i. Let s be the CapturingGroupName of the corresponding RegExpIdentifierName.
// ii. Perform ! CreateDataPropertyOrThrow(groups, s, capturedValue).
for (name, range) in named_groups {
if let Some(range) = range {
let value = if let Some(s) = input.get(range.clone()) {
s
} else {
""
};
groups
.to_object(context)?
.create_data_property_or_throw(name, value, context)
.expect("this CreateDataPropertyOrThrow call must not fail");
}
}
groups
} else {
// a. Let groups be undefined.
JsValue::undefined()
};
// 26. Perform ! CreateDataPropertyOrThrow(A, "groups", groups).
a.create_data_property_or_throw("groups", groups, context)
.expect("this CreateDataPropertyOrThrow call must not fail");
// 27. For each integer i such that i ≥ 1 and i ≤ n, in ascending order, do
for i in 1..=n {
// a. Let captureI be ith element of r's captures List.
let capture = match_value.group(i);
let captured_value = match capture {
// b. If captureI is undefined, let capturedValue be undefined.
None => JsValue::undefined(),
// c. Else if fullUnicode is true, then
// d. Else,
Some(range) => {
if let Some(s) = input.get(range) {
s.into()
} else {
"".into()
}
}
};
// e. Perform ! CreateDataPropertyOrThrow(A, ! ToString(????(i)), capturedValue).
a.create_data_property_or_throw(i, captured_value, context)
.expect("this CreateDataPropertyOrThrow call must not fail");
}
// 28. Return A.
Ok(Some(a))
}Self::abstract_builtin_exec()方法中存在global以及last_index这样看来最终执行的方法就是在这里了，仔细查看该方法中的代码（代码写的很详细而且每一步都有注释）
在第 12 步中：
lastIndex 超过文本长度且当 global 存在时将 lastIndex 置为 0
获取匹配到的值（match_value）
如果未匹配到则置为advance_string_index()方法的返回值
advance_string_index()不在当前问题的考虑范围 https://tc39.es/ecma262/#sec-...
第 13 步获取匹配到的值的 endIndex
第 15 步将 lastIndex 置为 endIndex
至此也就整明白了g标志的含义，在正则的原型链中存在一个lastIndex，如果匹配为真时lastIndex不会重置为 0 ，下一次开始时继承了上次位置，
在问题代码中分析
const reg = /[a-z]/g; // 声明后，lastIndex 为 0
reg.test('a'); // => true；第一次匹配后，lastIndex 为 1
reg.test('a'); // => false；第二次匹配由于 lastIndex 为 1，且字符只有一个，得到 false，将 lastIndex 置为 0
reg.test('a'); // => true；下面依次循环前两次的逻辑
reg.test('a'); // => false；
reg.test('a'); // => true；到此，相信大家对“JavaScript正则表达式中g标志实例分析”有了更深的了解，不妨来实际操作一番吧！这里是亿速云网站，更多相关内容可以进入相关频道进行查询，关注我们，继续学习！
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。