Juniper防火墙平台支持NSRP所需要的最低Screen

Juniper防火墙平台支持NSRP所需要的最低ScreenOS

Platform Active/Passive Active/Active

ISG Series 5.0.0 or above 5.0.0 or above

NS5000 Series 5.0.0 or above 5.0.0 or above

SSG550/550M 5.1.0 or above 5.1.0 or above

SSG520/520M 5.1.0 or above 6.0.0 or above

SSG300 Series 5.4.0 or above 5.4.0 or above

SSG 140 5.4.0 or above 6.0.0 or above

SSG5 & SSG20 5.4.0 or above* 6.0.0 or above*

NS500 5.1.0 or above 5.1.0 or above

NS200 Series 5.1.0 or above 5.1.0 or above

NS50 5.1.0 or above Not Supported

NS25 5.1.0 or above** Not Supported

NS5gt 5.1.0 or above*** Not Supported

NSRP-Lite is a limited functionality version of NSRP and is supported on the following platforms:

NetScreen-5XT

NetScreen-5GT

NetScreen-25

NetScreen-50 (supports both NSRP-Lite and NSRP, depending on license)

Unlike the full version of NSRP, NSRP-Lite only synchronizes configuration information. It does not support RTO or session synchronization. This means should a device failover occur all user sessions and ××× connections must be re-established. While most applications have built-in mechanisms to re-establish sessions, it is necessary to enable ××× Monitoring on the ××× Tunnels on NSRP-Lite devices to ensure the tunnels are properly re-established in the event of a failover.